The crash bar is made from high-quality, electropolished stainless steel and expands the range of use for your adventure motorcycle. The two-part crash bar has been positioned as closely as possible to the vehicle to harmoniously integrate it into the existing vehicle design. Its special construction ensures optimal force distribution and largely protects not only the radiator but also the tank and fairing from damage. The crash bar is easy to install, resistant to rust, and easy to maintain.

In addition to our rear axle crash pads, we also offer crash pads for the front axle of your GS. These small but effective parts protect the critical points of your bike and prevent damage to the fork leg and axle seat in the event of a fall. Available as a set for both sides.

It has proven itself on thousands of track kilometers. The 4 mm thick aluminum absorbs a large part of the impact energy through deformation "in case of a fall." The cylinder is effectively protected from scratches and damage. Additionally, the technical look of the boxer is even more emphasized. Highly recommended, especially for off-road rides.

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick black anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5133!

The Touratech cylinder protection made of stainless steel is the ideal complement to the original BMW engine protection bar, as it closes the gap between the pipes.This prevents sharp stones, for example, from finding their way to the valve cover and damaging it.Made from 2mm thick stainless steel and reinforced with ridges and curves, the stainless steel cylinder protection withstands even the toughest demands. Additionally, it is optimized with plastic grinding pads.The simple installation is done via a special clamping mechanism.A technically sensible accessory and a true visual "highlight" for your R1200GS/GSA!

This set is used for relocating the DIN socket so that it can continue to be used after the installation of the double USB socket 01-030-0084-0.This allows you to continue using your BMW battery charger and even an air compressor for the tires.Your package includes the following items:- Mounting bracket- Wiring harness for battery connection with fuse

It is mounted above the handlebar clamp, placing the socket in an ergonomically favorable position. The design of the bracket allows for 4 different positions (left, right, front, back). The kit includes all the necessary parts for installation.Output power Connection 1: 2.3 A / Connection 2: 1.0 AScope of delivery:- Dual USB charger with nut- Power cable with fuse- Mounting bracket- Set of M8 screws, washers, spacers, and coversNote: not compatible with older air-cooled R1200GS handlebars (K25)

Touratech Engine Crash Bar "Street" - the sporty protection for the cylinder and valve cover of your BMW R 1300 GS! The core of the Touratech Engine Crash Bar "Street" is the integrated sliding protection. This is perfectly contoured to the valve cover of the 1300 Boxer and positioned exactly where it needs to be! In the event of a "tip-over" or "slip," the bar absorbs the forces generated and distributes them gently. The sliding pad can support itself broadly against the valve cover in a serious situation. The close-to-engine routing of the bars ensures that ground clearance is not affected. The Touratech Engine Crash Bar "Street" is an effective combination of 25 mm thick electropolished stainless steel tubing and extremely durable plastic elements. In short: - effective protection for the cylinder and valve cover - efficient combination of electropolished stainless steel tubing and fiberglass-reinforced plastic sliding pads - lightweight, safe, and easy to install By reducing the lengths of the tubes, the weight has been reduced by almost 50%! (Weight compared to engine crash bar 035-5160)

The developers at BMW have created a motorcycle with the F900GS/F850GS that invites you to take excursions into the terrain. Some of the positive off-road characteristics have been further improved by our Touratech developers.Touratech has placed great emphasis on stability and functionality.Larger damages, such as holes in the engine block, can be effectively avoided with the large Touratech engine protection.For maximum stability, the 4mm thick aluminum base plate features multiple contoured recesses, and the force of an impact is distributed over 6 mounting points thanks to an additional lower stainless steel mounting plate on the engine. The ground clearance is not restricted by these two base plates.Additionally, plastic rails at the lower part of the base plate ensure that the already recessed screw heads are completely covered. This allows the engine protection to be easily removed even after heavy off-road use.Last but not least, the plastic rails facilitate the "sliding over" of stones, rocks, or tree stumps.They also help prevent dirt from settling.All in all, the Touratech engine protection for the BMW:A product that meets the highest technical demands and is visually an absolute "highlight"!Of course, it is also suitable for the BMW F800GS (2024-) and F750GS! You will additionally need the mounting kit 082-5139 (or the original BMW mounting kit 11-84-8-544-599).

The developers at BMW have created a motorcycle with the F800GS that invites excursions into the terrain. Some of the positive off-road characteristics have been further improved by our Touratech developers.This engine protection is an absolute revolution! Touratech has placed great emphasis on stability and functionality.Larger damages such as holes in the engine block can be effectively avoided by the large Touratech engine protection.Of course, it is also suitable for the BMW F700GS and F650GS (Twin)!For maximum stability, the multiple indented recesses in the 4mm thick aluminum base plate ensure that the force of an impact is distributed over 6 mounting points thanks to an additional lower stainless steel mounting plate on the engine. The ground clearance is not restricted by these two base plates. Another advantage is that the engine protection is raised in the front area to such an extent that it also protects the oil filter and oil cooler.Additionally, plastic rails at the lower part of the base plate ensure that the already recessed screw heads are completely covered. This allows the engine protection to be easily disassembled even after heavy off-road use. Last but not least, the plastic rails facilitate the "sliding over" of stones, rocks, or tree stumps.Almost incidentally, they also ensure that no dirt can settle.All in all, the large Touratech engine protection for the BMW F800GS: A product that meets the highest technical demands and is visually an absolute "highlight"!

With its excellent off-road capabilities, the R1200GS invites you to take extended off-road trips time and again. To ensure that this enjoyment remains guilt-free, we have developed an engine guard specifically for the R1200GS. Impacts and stresses are distributed across the entire engine block, providing optimal protection for the engine casing. During challenging off-road use, the angled front shape of the engine guard allows for much easier sliding over stones, rocks, and uneven terrain.- also for model 2010

The symbiosis of the latest manufacturing techniques and individual design!The RALLYE engine guard is designed as a complete protection from the headers to the catalytic converter of your R1250GS. It fits all R1250GS and Adventure models. In the development, we also focused on compatibility with original BMW and Touratech crash bars. Thanks to innovative manufacturing technology, it comes without disruptive weld seams, which are often perceived as weak points.The unique shape of the 4 mm thick aluminum part guarantees effective protection, high stability, and gives your GS a sporty-modern look. Like a protective shell, the RALLYE engine guard surrounds your headers to protect them as best as possible from all sides. It hugs the body of your BMW, ensuring maximum ground clearance. The organically rounded shapes effectively dissipate energy upon impact. It also prevents jamming or snagging. Direct impacts are compensated by the additional stainless steel plate inside. Since the RALLYE engine guard extends behind the main stand of your GS, even the catalytic converter is effectively protected. Details such as chamfered edges protect the screw heads in tough off-road use.By using internal hex screws, the installation/removal of the engine guard during the maintenance of your GS is child's play.

The symbiosis of the latest manufacturing techniques and individual design!The RALLYE engine guard is designed as complete protection from the headers to the catalytic converter of your R1250GS. It fits all R1250GS and Adventure models! In the development, we also focused on compatibility with original BMW and Touratech crash bars. Thanks to innovative manufacturing technology, it comes without disruptive weld seams, which are often perceived as weak points.The unique shaping of the 4 mm thick aluminum part guarantees effective protection, high stability, and gives your GS a sporty-modern look. Like a protective shell, the RALLYE engine guard surrounds your headers to protect them as best as possible from all sides. It hugs the body of your BMW, ensuring maximum ground clearance. The organically rounded shapes effectively dissipate energy upon impact. It also prevents jamming or snagging. Direct impacts are compensated by the additional stainless steel plate inside. Since the RALLYE engine guard extends behind the main stand of your GS, even the catalytic converter is effectively protected. Details such as chamfered edges protect the screw heads in tough off-road use.By using internal hex screws, the installation/removal of the engine guard during the maintenance of your GS is child's play.

A subtle eye-catcher with protective effect.The exhaust flap of the R1250GS/R1200GS is almost unprotected. This protection is made from anodized aluminum. It integrates perfectly into the aesthetics of the BMW and reliably protects the exhaust flap from damage.Easily attached with the original fastening material.

Necessary for simultaneous installation of:Touratech crash bars (01-037-5160-0 / 01-037-5162-0) and the stainless steel valve cover protection (01-037-5130-0) or aluminum (01-037-5131-0 / 01-037-5132-0).

With the Touratech fairing crash bars, expensive fairing damage is a thing of the past. This extension particularly protects the upper area of the fairing, but also safeguards the sensitive radiator and even the tank from significant damage. The three-part Touratech motorcycle crash bar hugs the R 1300 GS as closely as possible, while also embracing the innovative, sporty design of the BMW.A novel connection technology enables the force-locking installation of the extension to the engine crash bars. In the event of a fall, the forces that occur are effectively diverted and optimally distributed. The fairing and ultimately the tank itself are safe. The impending end of the journey and expensive repairs are averted. The plastic parts of your Boxer-GS do not come into contact with the ground. Scratches on the fairing parts, which would constantly be a source of annoyance, do not occur with the Touratech crash bar extension! Made exclusively from robust, electropolished stainless steel, the extension is resistant to rust. Even deeper scratches lose their terror. Despite the impressive diameter of the 25x2 mm stainless steel tubes, the extension is mounted as close as possible to and symmetrically to the vehicle axis. It has no impact on lean angle or ground clearance. The crash bar extension harmoniously integrates into the overall appearance of the 1300 and visually becomes a part of the motorcycle. Additionally, the robust construction offers an ideal way to "grab" the motorcycle from the front, for example, to pull it out of the mud. Combined with the original BMW engine protection bar, this extension provides an ideal complement in terms of form and function! A comprehensive protection that couldn't be better. In short: - extensive protection of the fairing, including radiator and tank - made from high-quality stainless steel, 25x2 mm, double shot-blasted and electropolished - the elegantly curved design skillfully adopts the design language of the R1300GS - forces occurring during a fall or tipping over are absorbed and gently diverted to designated areas, preventing significant damage -stable multi-point attachment through high-strength clamping on the engine crash bar The crash bar motorcycle is both an aesthetic enhancement and an absolutely sensible investment to protect your BMW from expensive damage. The ideal complement to the original BMW engine protection bar for the BMW R 1300 GS and a significant advantage for a unique appearance.Note: Your original BMW auxiliary headlights can be easily continued to be used with the optionally available adapter set 01-045-5200-0!

When riding on wet roads or off-road, dirt and water are thrown forward and pushed onto the upper body and head by the wind. The widening for the front upper fender significantly reduces this effect. The vehicle front and helmet visor stay cleaner for longer, and stone chips and scratches are minimized!The fender widening is the perfect addition to your new Desierto V fairing! Your GS will have a unique, sporty look that will impress you and those around you!- Made from tough, highly durable PU plastic- Easy to install- Delivered complete with mounting materials- Design and form language of the R1250GS/R1200GS is continued- Elegant, matte black surface- Subtle Touratech lettering at the front

This handy, compact basic first aid kit is ideal for short trips, cycling tours, and other sporting activities. Practical, small, lightweight.This kit contains everything that is important and required according to DIN 13167 for motorcyclists. Adhesive bandages, instant wound dressings, bandage packages, emergency blanket, sterile dressing, scissors, vinyl gloves, and a first aid manual are included.This first aid kit should be an essential part of your equipment. The bag is made of water-repellent nylon fabric with a large zipper. The First Aid Kit DIN 13167 is specifically designed for motorcycle use and contains the following:- 1 roll of adhesive bandage- 8 packs of instant wound dressings- 2 bandage packages- 1 emergency blanket- 1 sterile dressing- 1 pair of scissors- 4 bags of vinyl gloves- 1 first aid brochure- 1 contents listIn Austria, carrying a DIN 13167 first aid kit on a motorcycle is mandatory!Dimensions and Weight:- Dimensions: 15 x 10 x 5 cm- Weight: 240 g

The first Touratech luggage bridge that adapts to your needs! When folded, it elegantly fits the shape of your F850GS, does not hinder you during sporty off-road excursions, and still provides enough space for a small day trip. In just a few seconds, it can be unfolded without tools, ensuring that even the largest luggage finds a secure place on your F850GS.This luggage bridge can be mounted on your F850GS with just a few simple steps.The luggage plate fits precisely onto the existing mounting points. The solid luggage bridge extension offers extensive tie-down options and creates a stable surface for securing your travel gear. Features:- precisely laser-cut 4 mm thick aluminum and 3 mm stainless steel- only 42 cm wide when folded- up to 60 cm wide when unfolded- larger support surface for your luggage, with slots for tie-down straps- the original grab handles remain intact- Very robust in designNot compatible with the BMW luggage bridge from the "Touring Package"!

Absolutely stable and high-quality film, protects against stone chips and other damage.Black film with white print. Very easy and quick to apply, strongly adhesive.- Set for both sides

Absolutely stable and high-quality film, protects against stone chips and other damage.Black film with white print. Very easy and quick to apply, strong adhesion.- for both sides Dimensions: approx. 21x7 cmAlso suitable for Honda CRF1000L Africa Twin and KTM 1090 Adventure.

A robust carrier is essential for any good top case!To utilize our ZEGA top cases equipped with RapidTrap, it is crucial to use a perfectly matched carrier. We have found specific solutions for many motorcycle types.If, however, there is no ready-made solution available for your motorcycle, we have decided to offer the base carrier as a blank. This way, nothing stands in the way of your custom build!- 18 mm stainless steel tube with 2 mm wall thickness and 3 mm stainless steel inner plate- optimally suited for RapidTrap top cases- bent, laser-cut, welded, and electropolished- external dimensions 285 x 245 mm- tightly tolerated flatness!The ZEGA Evo / Pro top case can be attached to the carrier and is lockable. Available in natural aluminum and anodized versions in silver (And-S) or black (And-Black). For many vehicles, we already have vehicle-specific solutions!"Luggage Bridge ZegaPro Topcase".

So far, we have not been able to develop travel-ready luggage racks for all motorcycle models.Therefore, we have decided to sell the core component of a robust rack separately, as the biggest challenge in manufacturing a rugged luggage rack is bending the frames. Now nothing stands in the way of your custom build!- 18 mm stainless steel tube- 2 mm wall thickness- optimally suited for our 18 mm mounting kits- bent, welded, and polished- external dimensions 350 x 245 mm- tightly tolerated flatness!Delivery includes: 1 frame blank, stainless steel

Protects the brake caliper from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.- Made from 2 mm aluminum- Anodized natural aluminum surface- Easy installation- Simple removal for maintenance- Custom-fit manufacturing