Nut for Rear Swingarm   Attention: 4 pieces are required!   Dimensions: - Outer: 16mm - Inner: 8.5mm - Height: 10mm  

Neutral switch for BMW R 2-valve M12 x 1.5    

Original BMW spare parts for mounting the windshield on the R60/S R90/S R100/S

Valve Cone Piece   - For all BMW R2V models (except R45, R65)

Fehling Touring Handlebar Type: LN 22   - made of chrome-plated steel tube - tube diameter 22 mm (7/8") - without cable drilling - with TÜV certificate   - compatible with BMW R 80 G/S, R 80 RT/ST, R 100 RT   Fehling has been manufacturing accessories for motorcycles and large scooters since the 1950s. From development to production, top quality according to ISO 9001 and Made in Germany.   Dimensions: a: 710 mm b: 200 mm c: 135 mm d: 260 mm e: 180 mm Technical Data:Diameter:   22.2 mm (7/8 inch) Type:   Touring Material:   Steel Width:   710 mmColor:   chrome Special Feature:   no special feature Manufacturer:   Fehling

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type: Progressive Length: 545 mmDiameter 1: 26.5 mmSpring Rate 1: 5.5 N/mmSpring Rate 2: 7 N/mmAir Chamber Left: 150 mmAir Chamber Right: 150 mmRecommended Viscosity: 10W Manufacturer: YSS

The mirror glass has a reducing effectTechnical Data:Usage:   Vehicle-specific Mirror Type:   Stem mirror Mounting:   Clamp Mirror Head Shape:   Round Mirror Head Diameter:   120 mmMounting Side:   Left Total Width:   180 mmColor:   Black Material:   Plastic With Indicator:   No E-tested:   Yes

BMW R1200 GS R RS RT LS K50 Sliding Protection for Valve Cover Protection Plastic sliding protection for original BMW stainless steel valve cover protection 1 set = R + L Replacement for the original sliders.

BMW R1200 GS R RT RS LC original rear brake disc Part number 34218526568 K50 K51 K52 K53 K54 Original BMW spare part

for R1200GS from 2013/ BMW R1200GS Adventure from 2014/ BMW R nineT/ BMW R1200RT from 2014/ BMW R1200R from 2015/ BMW R1200RSJust a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping in-easy removal for maintenance work-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: blackAlso fits the BMW RnineT (not Scrambler)!

Just a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is now hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping on-easy removal for maintenance-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: redAlso fits the BMW RnineT (not Scrambler)!

BMW Original Rear Brake Disc NEW Item Description This offer includes 1 rear brake disc . This offer applies to the item in the red marked circle!!! ( Image No. 1 ) BMW Part Number: 34217664102 Fits according to part number for the following vehicles: R 1200 GS 04 R 1200 GS 08 R 1200 GS 10 R 1200 GS Adventure 06 R 1200 GS Adventure 08 R 1200 GS Adventure 10 HP2 Enduro HP2 Megamoto R 1200 RT 05 R 1200 R 10 R 900 RT 05 SF R 900 RT 10 SF R 1200 R 06 R 1200 R 11 R nineT R nineT Scrambler K 1200 S K 1300 S K 1200 R K 1200 R Sport K 1300 R S 1000 XR F 700 GS F 700 GS 17 F 800 GT F 800 S F 800 ST F 650 GS F 800 GS 08 F 800 GS 13 F 800 GS 17 F 800 GS Adventure F 800 GS Adventure 16 F 800 R F 800 R 15

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

optional for the engine protection bar reinforcement bar in front of the engine block black

BMW R1200R LC + RS stiffener silver Strut Engine Guard R 1200 R RS LC optional for the engine guard Stiffener front of the engine block silver Picture is only an example

BMW R1200R LC R1200RS LC Touring Case Right Anthracite Elegant anthracite hard-shell plastic case with an extension at the bottom, making loading and unloading extremely easy. Hard-shell plastic case, splash-proof Lid painted in granite gray metallic matte Extension at the bottom of the case facilitates loading and unloading Case lockable, vehicle key matching possible Maximum load per case: 10 kg Recommended maximum speed with cases: 180 km/h Weight (per case): approx. 3.8 kg Discreet case holders that do not interfere when cases are removed Type: Plastic single case Loading type: Lid opens sideways Recommended maximum speed: 180 km/h Which carrier system can the case/case set be mounted on?: Fits only with the original luggage system of the vehicle manufacturer Features: Ergonomic handle, locking cylinder available separately Number of keys: none Locking cylinder: not included, must be ordered separately Color: Anthracite Fits the following vehicles: K53 R 1200 R LC K54 R 1200 RS LC

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: in combination with the original luggage bridge.

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle a unique character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions Scope of delivery: right + left including mounting materials and instructions any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes no ABE or registration required

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but rather in the side cases or tank bag. Recommended maximum speed: 130 km/h Designed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

Secure Hepco&Becker aluminum protection for the cardan shaft. Bent and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points Includes mounting materials and instructions

Hard-shell plastic cases, splash-proof Total volume: approx. 63 l (right approx. 31 l, left approx. 32 l) The larger left case comfortably fits 1 helmet. Case lid painted in granite gray metallic matte Extension at the bottom of the case facilitates loading and unloading Case lockable, vehicle key compatibility possible Maximum load per case: 10 kg Recommended maximum speed with cases: 180 km/h Weight (per case): approx. 3.8 kg Discreet case holders that do not interfere when cases are removed Case holders also available as special equipment (from factory) Optional: Waterproof inner bags for touring cases Scope of delivery: Delivery without case holders and without locking cylinder NOTE:       Color in the illustration may vary,       as we do not yet have images for all colors!

Hard-shell plastic cases, splash-proof Total volume: approx. 63 l (right approx. 31 l, left approx. 32 l) The larger left case comfortably fits 1 helmet. Case lid painted in granite gray metallic matte Extension at the bottom of the case facilitates loading and unloading Case lockable, vehicle key synchronization possible Maximum load per case: 10 kg Recommended maximum speed with cases: 180 km/h Weight (per case): approx. 3.8 kg Discreet case holders that do not interfere when cases are removed Case holders also available as special equipment (from factory) Optional: Waterproof inner bags for touring cases Scope of delivery: Delivery without case holders and without locking cylinder NOTE:       Color in the image may vary,       as we do not yet have images for all colors!

BMW R1200ST Owner's Manual R 1200 ST Language: French Used part, noticeable signs of wear, see additional pictures BMW Part Number: 01427680912 Item Description Familiarize yourself with your machine so that you can move safely and confidently in road traffic. Please read this owner's manual for that purpose. You will find important information on vehicle operation and the use of all technical features. In addition, you will receive helpful tips and information on the proper equipment in terms of traffic and operational safety, as well as advice for the best possible preservation of your motorcycle's value.

Handlebar Conversion Kit and Handlebar Rise with Offset 60mm Higher ABE for BMW R1200ST 2004-2006 incl. ABE Easily raise the handlebar of your BMW R1200ST by 60 mm higher and 35 mm closer. This will elevate the body by 60 mm. Our conversion kit makes it possible. However, it only fits models from 2004-2006 with brake booster, Generation I.This achieves a natural ergonomics for a healthier sitting position.The original handlebar holder is mounted above the fork bridge. This is possible in conjunction with the anti-rotation devices. An extended brake hose must be installed; this is included in the kit.Please do not raise the risers without our anti-rotation device, as the handlebar may twist during hard braking. All items have been mounted and tested on original motorcycles - without aftermarket modifications.