Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The one-piece racing bellypan for the BMW S 1000 RR is closed at the bottom and can only be used with Racing complete exhaust systems without front exhaust silencer without modifying the bellypan. The bellypan is designed to allow the original side stand to be reused. matches racing trim perfectly but can also be combined with series side panels. In this case. however. the front plastic insert (air intake on oil cooler and radiator) must be cut at the height of the break between the side panels and bellypan. as the air intake to the oil cooler on the Racing carbon bellypan is permanently attached. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. This Racing Bellypan is closed on the bottom. it is only possible to mount it together with a full racing exhaust. The original side stand can be used together with this bellypan.

The 4-piece trim kit is required for the Racing trim sides and the 1-piece Racing engine spoiler. This holder kit allows the side panels to be attached via quick release fasteners and attaches the 1-piece Racing engine spoiler to the side of the engine and frame.

The racing rear fairing comes as one part and is mounted with only six screws to the original rear frame. It contains a bulge for the additional available GPS antenna. The needed hole for the cable is also predrilled on the right spot.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly    

The carbon Racing seat for the BMW S 1000 RR Stocksport/Racing (2010-now) can be used along with the series seat pad. This allows the seated position on the vehicle to easily be adjusted with added or less padding. adjusting it to the driver&rsquos needs. Our Racing seat does not require the tail to be modified. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This visor shape was developed for motorsport and is used by many racing teams. The racing visor corresponds to the original visor in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics.

This disc shape was developed for racing and is used by many racing teams. The racing disc corresponds to the original disc in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics.

The 44cm long MRA racing screen features a noticeable elevation in the center of the screen - the so-called "double bubble." It fits perfectly with the overall design of this dynamic racing motorcycle. Available in clear, colorless, and black.  

The carbon rear hugger for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) replaces the original part using the original mounting points. The chain guard is already incorporated into this rear hugger. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon rear hugger for the BMW S 1000 RR replaces the original part using the original mounting points. The chain guard is already incorporated into this rear hugger. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

BMW S1000RR Rim - Decorative Stripes in Various Colors Product Description Glossy Rim Decorative Stripes pre-curved 8 mm wide decorative stripes for 17" (inch) rims high-quality vehicle film can be removed without residue at any time resistant to most oils, greases, fuels, aliphatic solvents, weak acids, salts, and alkalis available in various colors (see selection) custom colors available upon request NOTE: (not applicable to all decorative sets) the decorative stripes are manufactured directionally (the decoration points left or right in the same direction) Scope of Delivery Rim Decorative Stripes detailed instructions for application

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Seat Unit Racing fits to BMW S 1000 RR MY from 2019 and M 1000 RRThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon Racing seat for the BMW S 1000 RR from 2015 can be used along with the series seat pad. This allows the seated position on the vehicle to easily be adjusted with added or less padding. adjusting it to the driver’s needs. Our Racing seat does not require the tail to be modified.This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Drive Shaft Damper Original Spare Part Damper shafts are used to absorb load changes in the drivetrain. This reduces load spikes at high speeds and during sudden braking.   Worn dampers are noticeable through increased play in the drivetrain and automatically lead to wear of the chain set.  

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

wasserdichte Smartphonetasche speziell für den Hepco&Becker Tankrucksack "Street Daypack" und "Royster" Smartphone lässt sich durch Hülle bedienen wird mittels kleiner Klettverschlüssel am Tankrucksack an 3 Punkten befestigt kann im Handumdrehen entfernt werden

Ready-to-install KIT with all necessary parts, always tailored to the selected vehicle model. The illustration shows the exemplary scope of delivery of a KIT multiClip. This varies depending on the motorcycle model. With the stub: significantly higher seating comfort without having to install a superbike KIT with a tubular handlebar directly The stub can also be adjusted lower again if needed With parts certificate The KIT consists of: multiClip Sport Ø55 mm Base for fairing up to approx. 5 cm higher / up to approx. 8 cm wider

Stubby Handlebars KIT multiClip Tour Ready-to-install KIT suitable for the selected vehicle model. Choose the color combination of the steel braided lines: sheath / fitting. The illustration shows the exemplary scope of delivery of a KIT multiClip. This varies depending on the motorcycle model. With the stubby handlebars: significantly higher seating comfort without having to install a superbike KIT with tube handlebars directly. The stubby handlebars can also be adjusted lower again if needed. Please order separately: Handlebar ends With parts certificate KIT consists of: multiClip Tour Ø55 mm Extended clutch cable Adjustment screw for clutch cable Extended throttle cable Mounting plates for fairing Upper brake line