The carbon ignition rotor cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is attached to the engine using the 4 original screws. The lower section of the ignition rotor cover is designed as thick as possible to provide the most effective engine cover protection possible in the event of an accident. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Angeboten wird hier ein Neuteil Fahrzeug: M1000R, M1000RR, S1000R, S1000RR, F900GS  Hersteller: BMW Neupreis: 19,80 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 63147108165Nummer of dem Bauteil: 63147108412

Special design to access the seat lock.Can only be mounted in conjunction with Sportrack!Hepco & Becker luggage bridge extension:Stable aluminum plate to widen almost all luggage bridges when loose luggage is to be transported instead of a top case.With the raised edges and additional attachment points, the extension is ideal for securely transporting larger luggage rolls,travel bags, tents, sea bags, etc.Facts:• Construction made of aluminum,• high strength, high-quality appearance• Mounting options for luggage straps• Delivered with mounting accessories• Available as a model-specific version• Dimensions (LxW): approx. 390 x 230 mm• Recommended load: 5 kg. Please observe manufacturer specificationsNot suitable for top case mounting.

The extension is only possible in combination with a sport rack! Suitable for: BMW S 1000 RR Hepco & Becker Luggage Rack Extension:Stable aluminum plate for widening almost all luggage racks when loose luggage is to be transported instead of a top case.With the raised edges and additional attachment points, the extension is ideal for securely transporting larger luggage rolls,travel bags, tents, sea bags, etc.Facts:• Construction from aluminum,• high strength, high-quality appearance• Mounting options for luggage straps• Delivered with mounting accessories• available as a model-specific version• Dimensions (LxW): approx. 390 x 230 mm• Recommended load: 5 kg. Please observe manufacturer specificationsNot suitable for top case mounting.

BMW S 1000 RR up to year 2011 S 1000 R Rear extension for combination with Sportrack item Description The widening is only possible in combination with a Sportrack! Suitable for: BMW S 1000 R / RR Hepco & Becker rack extension: Stable aluminum plate for widening almost all luggage racks when no topazes, but loose luggage to be transported. quality optics • Made of aluminum, • high strength • Mounting possibilities for luggage straps • Supplied with mounting accessories: by the raised edges and the additional breakpoints that broadening is perfect for the safe transportation of larger roll bags, travel bags, tents, duffle bags, etc. geeignet.Fakten • as model-specific version • Dimensions (L x W): 390 x 230 mm • Recommended load: 5 kg. Please observe manufacturer's instructions not suitable for top case assembly.

Motorgehäusedeckel-SchutzAus hochfester Aluminium-Legierung gefräster Protektoren-Satz für rechten und linken Motorgehäusedeckel. Die elegante Konstruktion schützt exponiert liegende Gehäuseteile bei Bodenkontakt und im Fall eines Sturzes wirksam vor größeren Beschädigungen. Die Protektoren bestehen aus schwarz eloxiertem Leichtmetall, auf der linken Seite ist zur zusätzlichen Verstärkung ein austauschbares, silbern eloxiertes Verschleißteil angebracht.Zuverlässiger Schutz vor größeren Beschädigungen am GehäusedeckelAbsicherung von rechter und linker Gehäuse-SeiteKeine Beeinträchtigung des FahrverhaltensCNC-gefräst für präzise Passform und ansprechende OptikEinfache Montage an original Befestigungspunkten am GehäuseAus hochfester Aluminium-Legierung mit witterungsbeständiger EloxierungLieferumfang2 x Motorgehäusedeckel-Schutz1 x silbern eloxiertes Austausch-SchleifpadMontagematerialDetailsMaterial: AluminiumOberfläche: eloxiertFarbe: schwarzGesamtgewicht: ca. 0,1 kg

This disc shape was developed for racing and is used by many racing teams. The racing disc corresponds to the original disc in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics. Cost-effective alternative to the original windscreen. Years of experience and high quality standards guarantee an optimal fit in the vehicle. The windscreens have an ABE and do not need to be registered in Germany! The windscreen is offered in the colors smoke gray, black, and colorless/clear. Length in mm: 440 Width in mm: 440

Stubby Handlebar Kit multiClip Sport Ready-to-install kit with all necessary parts, always tailored to the selected vehicle model. Choose the color combination of the steel braided lines: Sheathing/Fitting. The illustration shows the exemplary scope of delivery of a multiClip Kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with a pipe handlebar directly. The stubby can also be adjusted lower again if needed. With parts certificate. KIT consists of: multiClip Sport Ø55 mm BM1S Extended clutch cable Upper brake line Spacer for fairing Hose piece for reservoir Clamp for the original fork bridge [2x] Spacer ring under the fork bridge [2x]Stubby approximately 3 cm higher / approximately 7 cm wider compared to the original.

Angeboten wird hier ein NeuteilFahrzeug: S1000R, S1000RR, M1000R, M1000RR Hersteller: BMWNeupreis: 1.067,37 € Zustand: siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46518359991

The carbon number plate holder for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) replaces the original part using the original mounting points. It is slightly shorter than the original part. This makes the motorcycle&rsquos tail seem a bit taller. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Set

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

This is a new part offered Vehicle: S1000RR Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 11437715430 Fits according to part number for the following vehicles:

Oil Level Check

Outer material made of polyester-polyurethane fabric. Waterproof inner pocket. Storage volume of 2.5 to 5.5 liters. Dimensions approximately 31 x 26 x 10 cm. Color: Black. For solo operation only. Additional Information

An ideal alternative for all bikers who do not like tank bags. The aerodynamically optimized bag for the passenger seat, 10 l from BMW Motorrad, is perfectly adapted to the racing design of the machine. It can be precisely mounted on the passenger seat without special brackets and stays securely in place thanks to its anti-slip coating. Under the durable polyester outer material, there is a zippered mesh pocket for small items in the lid, as well as a large main compartment with a waterproof, removable inner bag. The 7 liters of luggage volume can be expanded to up to 10 liters via a circumferential zipper. The bottom, side walls, and lid are reinforced, keeping the bag absolutely shape-stable even when empty. Due to the precise fit, it can only be mounted in conjunction with the passenger seat. Use with the mounted hump cover is not possible. High-quality bag with 7 + 3 liters of volume, for mounting on the passenger seat. Precise, secure attachment with tension straps. Optimal integration into the racing design of the machine. Waterproof, removable inner bag with roll closure. Anti-slip base plate for secure hold. Carrying handle and removable shoulder strap.

The comfort seat offers a noticeable increase in seating comfort thanks to additional padding and a seat height raised by 35 mm to 850 mm, providing the rider with even more carefree kilometers. Its three-color design (Black, Red, and White) also enhances the motorcycle's appearance. High seating comfort for the rider. Seat height: 850 mm (standard: 815 mm). Inseam length: 1,870 mm (standard: 1,805 mm). Comfort padding. Visual enhancement through three-color design (Black/Red/White).

Zuverlässiger Wetterschutz: Die Fahrzeugabdeckhaube für den Außenbereich schützt das Motorrad auch unter freiem Himmel vor Nässe, Schmutz und anderen Umwelteinflüssen. Das hochwertige Nylon-Cover ist wasserdicht und verfügt über Belüftungsöffnungen sowie ein großes Sichtfenster im Bereich des Kennzeichens. Kordelzüge gewährleisten eine optimale Fixierung der Haube am Motorrad, die beiden Metallösen im Frontbereich lassen sich zur Diebstahlsicherung nutzen. Praktisch ist zudem die integrierte Tasche, in der das Cover bei Nichtgebrauch aufbewahrt werden kann. Die schwarze Abdeckhaube ist mit einem großen silberfarbenen BMW Motorrad Schriftzug versehen und für viele BMW Motorräder geeignet.   Zuverlässiger Wetterschutz. Praktische Handhabung.

The HP Carbon Wheel Cover protects both the rider and the machine – and emphasizes the bike's dynamics with its high-gloss finish, providing the perfect sporty look. The high-quality carbon construction also makes the cover particularly impact-resistant while simultaneously reducing the overall weight of the machine. High-quality cover for the rear wheel. Reduces the weight of the machine. Painted with UV-resistant high-gloss lacquer. Particularly impact-resistant. Perfectly matched to the other HP accessories.

The CNC-machined HP clutch lever made of corrosion-resistant anodized aluminum emphasizes the sportiness of the machine in a particularly impressive way. It is perfectly matched to the bike's design and is reversible and foldable upwards, which reduces the risk of bending or breaking in the event of a fall. The distance from the handlebar to the clutch lever can be individually adjusted in three stages, and the ergonomically rounded lever contour provides an extra portion of riding comfort. High-quality clutch lever made of machined aluminum. Corrosion-resistant anodized. Reversible and foldable upwards. Handlebar distance adjustable in three stages. Scope of delivery: One clutch lever.

The titanium-colored CNC-machined HP brake lever made of corrosion-resistant anodized aluminum emphasizes the sportiness of the machine particularly impressively. It is perfectly matched to the bike's design and is reversible and foldable upwards, which reduces the risk of bending or breaking in the event of a fall. The distance from the handlebar to the brake lever can be individually adjusted in five stages, and the ergonomically rounded lever contour provides an extra portion of riding comfort. High-quality brake lever made of machined aluminum. Corrosion-resistant anodized. Reversible and foldable upwards. Handlebar distance adjustable in five stages. Delivery includes: one brake lever, titanium-colored.

The CNC-machined HP brake lever made of corrosion-resistant anodized aluminum emphasizes the sportiness of the machine particularly impressively. It is perfectly matched to the bike's design and is reversible and foldable upwards, which reduces the risk of bending or breaking in the event of a fall. The distance from the handlebar to the brake lever can be individually adjusted in five stages, and the ergonomically rounded lever contour provides an extra portion of riding comfort. High-quality brake lever made of machined aluminum. Corrosion-resistant anodized. Reversible and foldable upwards. Handlebar distance adjustable in five stages. Scope of delivery: One brake lever.

With the self-adhesive HP label, the HP carbon parts can be further customized as desired. The silver lettering on a black background measures 22 x 9 mm. Self-adhesive HP label for customization. Dimensions: 22 x 9 mm.