The carbon frame for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360° Video with the both Frame covers for the BMW S 1000 RR 2015. You will find the Video at Product Videos above this description. - The carbon frame cover for the BMW S 1000 RR Stocksport/Racing (from 2015) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360° Video with the both framecovers (left and right side) for the BMW S 1000 RR under Product Videos above! - The carbon frame for the BMW S 1000 RR (from 2015) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look at the 360° Video from the framecovers left and right for the BMW S 1000 RR. You can find it under Product Videos above this description. - The carbon frame for the BMW S 1000 RR (from 2015)) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360° Video of the Frame covers for the BMW S 1000 RR from 2015. You will find it under Product Videos above this description. - The carbon frame for the BMW S 1000 RR Stocksport/Racing (from 2015) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front carbon trim holder/instrument holder for the BMW S 1000 RR replaces the series instrument holder. We were able to further reduce the weight of the quite light series component through clever use of carbon. The trim holder is only intended for racing use. The holder does not feature headlight brackets. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Fairing Holder/Instruments Holder BMW S 1000 RR starting from 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon front fairing for the BMW S1000RR Racing is part of the racing fairing for the BMW S 1000 RR since 2023. It sis designed to be mounted with quick fasteners and not compatible with the original street fairing parts.  The upper mounting points on the instrument holder are the same as original and can be used. We recommend the usage of the carbon instrument holder.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   For an effortless mounting the fairing holder kit is necessary. The shown windscreen is only for illustration and not included.    The facts   - racing part. not for street use - improved wind protection - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The 1-piece carbon upper front fairing for the BMW S 1000 RR from 2015 replaces the original part using the original mounting points. The upper section is a 1-piece version. the centre trim piece is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece front fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!You can find a 360° video of our part in the category product Videos!This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Instrumentholder for the S1000RR Racing 2023 is part of the Race Fairing of the BMW S 1000 RR since 2023. It enables the possibility to use quick fasteners on the carbon front fairing. It also protects the cockpit below better than the original part while saving weight.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   The part can be mounted on the original mounting points.  The facts   - racing part. not for street use - improved protection of the cockpit below - preparation for the use of quick fasteners - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly  

Front Fender Racing BMW S 1000 RR Race 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Fender Superbike fits to BMW S 1000 RR starting from MY 2019 and BMW M 1000 RRRacingpart - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fender in carbon for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fender in carbon for the BMW S 1000 RR Stocksport/Racing (2010-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The fender of the M1000RR is much more than just a fender. It elegantly combines the function of previously three components in a single one. The integrated air ducts constantly supply fresh air to the brake calipers while riding to reduce the risk of brake fade. Tested under the toughest conditions. it helps achieve success in the world's most diverse racing series. It already helped the Tecmas Stock Team to a commanding victory at the legendary 24h of LeMans. But the fender cuts a fine figure not only on the race track. but also on the road. But so that not only the new M models benefit from the additional cooling. we looked for a way to make the fender compatible with other models. too. The ABE therefore covers not only the new BMW M1000RR. but all current four-cylinders of BMW. To benefit even more from the aerodynamic advancements on the front wheel. the rear flap prepares the additional mounting of the wheel covers.  Through the long continuation of the side surfaces to the rear. not only the air resistance is reduced when driving. but also the sensitive lower fork tubes for the first time reliably protected from stone chips.   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The Racing 1-piece carbon top trim for the BMW S 1000 RR from 2015 is not only compatible with our Racing trim but can also be combined with the series side fairing. This only requires two additional holes to be tapped in the side of the upper piece. Our Racing front fairing fits also with the original windshield. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Race Fairing (1 piece) fits to BMW S 1000 RR starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Racing 1-piece carbon top trim for the BMW S 1000 RR is not only compatible with our Racing trim but can also be combined with the series side fairing. This only requires two additional holes to be tapped in the side of the upper piece. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. This part fits to bikes with ABS. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Die Ritzelabdeckung in Carbon für die BMW S 1000 RR ab 2015 ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte. Die Ritzelabdeckung ist für Modelle mit ABS geeignet. Im Vordergrund stehen Gewichtsersparnis (in der Regel Einsparung von ca. 70% im Vergleich zum originalen Bauteil) und höhere Steifigkeit. Das Carbonteil wurde nach den neuesten Richtlinien im Autoklaven komplett aus Prepreg (siehe FAQ) Material gefertigt und im nächsten Schritt. wie bei uns üblich. zum Schutz gegen Umwelteinflüße mit einer klaren Kunststoffbeschichtung überzogen. Diese Kunststoffbeschichtung übertrifft den sonst üblichen Klarlacküberzug in der Schutzwirkung. Kratzfestigkeit und Beständigkeit enorm. Aber nicht nur technisch kann die Beschichtung punkten. sondern sie unterstreicht auch die dreidimensionale Wirkung der Carbonstruktur nochmals deutlich.

Konstruktion aus Aluminium mit hoher Festigkeit und hochwertiger OptikBefestigungsmöglichkeiten für GurteNicht geeignet zur Topcasemontageinkl. Montagematerial und Anleitunghochwertige KunststoffbeschichtungEmpfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Herstellerangaben. Schweres Gepäck sollte generell nicht auf dem Heck, sondern in den Seitenkoffern oder dem Tankrucksack transportiert werden.