S 1000 RR Street (2015-present) Crash pad left on the frame Carbon The crash pad on the upper Motorverschraubung offer the very vulnerable from falls field the best possible protection. In the area at the most vulnerable location on the motor holding screw a rotary part made of aluminum is incorporated to provide additional protection inside the carbon fiber. The crash pad on the frame complements the vehicle and provides additional protection of the vehicle from damage. The somewhat vulnerable when falling upper Motorverschraubung is extremely effective protected by the Mantle. The assembly of the parts is done via supplied tape and / or the use of original mounting points. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

The carbon swing arm covers for the BMW S 1000 RR Stocksport/Racing (2010-now) is attached to the swing arm using the adhesive strips from the carbon parts. The left swing arm cover features a carbon lower chain guard required for many racing classes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Fabric rear bag for strap attachment on various rear racks. Not waterproof. Practical and well thought out: securely attached to the passenger seat, the weight distribution is not negatively affected, and the bike remains neutral and agile. With a zipper and compression straps, it offers a variable volume of up to 25 liters. The design made of coated Cordura fabric is water-repellent and durable. With a carrying handle and straps, it can also be used as a backpack or shoulder bag.Small Sport StarCapacity 15-25 litersDimensions W x H x D: 26 x 33 x 20/33 cm

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The tank side panel in carbon for the BMW S 1000 RR Stocksport/Racing (2010-2014) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The tank side panel in carbon for the BMW S 1000 RR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The tank side panel in carbon for the BMW S 1000 RR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The tank side panel in carbon for the BMW S 1000 RR from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The tank side panel in carbon for the BMW S 1000 RR from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This revolutionary new device effortlessly installs mushroom-shaped rubber plugs in all tubeless tires while the tire can remain on the rim. With the help of the "Tire Repair Kit" and the included hex key, the plug is twisted into the hole. The plug expands under pressure, filling the punctured area. A strong pull on the shaft of the plug with pliers ensures a secure fit of the mushroom head against the inner wall of the tire, preventing any air from escaping. This technology guarantees maximum reliability and reduces your repair times in any situation.Only suitable for tubeless tires!Scope of delivery:- "Tire Plugger"- Adapter- Needle (with handle)- Rasp (with handle)- Hex key- 15 x plugs- Blade (foldable)- Bag- Fabric zipper bag (16 x 10 x 5 cm)Caution: Emergency repair kit!

This handy, compact basic first aid kit is ideal for short trips, cycling tours, and other sporting activities. Practical, small, lightweight.This kit contains everything that is important and required according to DIN 13167 for motorcyclists. Adhesive bandages, instant wound dressings, bandage packages, emergency blanket, sterile dressing, scissors, vinyl gloves, and a first aid manual are included.This first aid kit should be an essential part of your equipment. The bag is made of water-repellent nylon fabric with a large zipper. The First Aid Kit DIN 13167 is specifically designed for motorcycle use and contains the following:- 1 roll of adhesive bandage- 8 packs of instant wound dressings- 2 bandage packages- 1 emergency blanket- 1 sterile dressing- 1 pair of scissors- 4 bags of vinyl gloves- 1 first aid brochure- 1 contents listIn Austria, carrying a DIN 13167 first aid kit on a motorcycle is mandatory!Dimensions and Weight:- Dimensions: 15 x 10 x 5 cm- Weight: 240 g

This flexible and robust steel net protects your luggage from theft during your travels. The net is highly stretchable and cut-resistant. It comes with a lock that allows you to secure your luggage to fixed objects.Weight: 580 g

CNC-machined Handlebar Ends for Motorcycles Distinctively elegant finish with only 6.5 mm thickness Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 44g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles High-quality anodized in color The mounting screw elegantly disappears under the cover Available in various anodized colors / End cap is always black Permanently secure fit through aluminum expansion sleeves Ø12+18 mm Weight per pair: 120g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 140g Dimensions: see sketch

CNC-machined Handlebar Ends for Motorcycles - 1 Pair - Black Absolutely clean finish Available in various anodized colors Permanently secure fit with aluminum expansion sleeves Ø12+18 mm Weight per pair: 360g Dimensions: see sketch

The Rearlight Cover matches perfect with the original Design of the painted areas of the seat and replaces the original unpainted Plastic Rearlight Cover. and gives the rear end something special!

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon upper tank cover for theBMW S 1000 RR Straße (2010-2014) / HP 4 (2012-now) replaces the original part using the original mounting points. Aside from the carbon side fairings this eye catcher is a must for every S 1000 RR / HP 4! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Angeboten wird hier ein Neuteil Fahrzeug: S1000R bis 2020, S1000RR bis 2018, S1000XR bis 2019, HP4 Hersteller: BMW Neupreis: 42,16 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 11127713809

Carbon Verkleidungsseitenteile für BMW S 1000 RR / HP 4 Optimale Performance und Design Passend für Modelle: S 1000 RR Straße (2012-2014) / HP 4 Ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte Integrierter Plakettenträger - kein zusätzlicher Kauf notwendig Vorteile Gewichtsersparnis: Reduziert das Gewicht um ca. 70% im Vergleich zum Original Höhere Steifigkeit: Verbesserte Stabilität und Performance Material: Komplett aus Prepreg im Autoklaven gefertigt Schutzbeschichtung: Übertrifft herkömmlichen Klalrlack in Schutzwirkung und Kratzfestigkeit Erleben Sie die dreidimensionale Wirkung der Carbonstruktur in unserem 360 Grad Video! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.