With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Please have a look on the 360 ° Video with the crahpads in carbon for the BMW S 1000 RR (all MY) and HP 4. You will find the Video at the button Product Videos above this description. - The crashpad on the frame is covering the important area around the upper engine holder.  The crashpad on the frame is an addition to the original components on the motorcycle and helps to protect the motorcycle. This crashpad protects the upper engineholder. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Angeboten wird hier ein Neuteil Fahrzeug: K21 R nineT / K42 HP4 / K46 S1000RR / K47 S1000R / K49 S1000XR Hersteller: BMW Zustand: Neu Beschreibung: wird verkauft wie abgebildet Teilenummer:31427718399

The Dual Injector offers several advantages, as the Scorpion Dual Injector is mounted using a flexible multi-dispenser plate and can thus be individually adhered to all swingarm shapes. Optionally, the injector can also be directly screwed onto chain guides, swingarms, and much more. The robust and shock-absorbing plastic reinforcement around both nozzles inevitably directs every drop of oil to the chain / sprocket. Additionally, the precise dosing extends the refill intervals.The double nozzle can be retrofitted to any already installed system.- optimal lubrication on both sides of the chain- saves oil and increases wear protection- easy and flexible installation- perfect fit for the new multi-dispenser plate- optimally adjustable through individual, detachable sections- compatible with all Scottoiler systems

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The badge holder in carbon for the BMW S 1000 RR Straße (2010-2014) / HP 4 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon winglet for the BMW S 1000 RR Straße (2012-2014) / HP 4 replaces the original piece using the original mounting points. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon side winglet for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) replaces the original piece using the original mounting points. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The carbon frame for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The frame protector for the right side for the BMW HP4 RACE.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fender in carbon for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. This part fits to bikes with ABS. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Stubby Handlebar KIT multiClip Tour Ready-to-install KIT suitable for the selected vehicle model. Choose the color combination of the steel braided lines: sheath / fitting. The illustration shows the exemplary scope of delivery of a KIT multiClip. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike KIT with a pipe handlebar directly The stubby can also be adjusted lower again if needed Please order separately: Handlebar ends With parts certificate The KIT consists of: multiClip Tour Ø55 mm Extended clutch cable Adjustment screw for clutch cable Extended throttle cable Mounting materials for fairing Upper brake line

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

compatible with most Hepco&Becker side case carriers. (Please note any potential restrictions in the model-specific notes of the carrier) suitable for one helmet and more includes key and locking cylinder includes lock adapter to secure the case to the side case carrier waterproof thanks to special sealing cover is screwed on and can be painted in vehicle color if needed integrated bumper protects against minor bumps case shell made of impact-resistant, molded plastic cases can be keyed alike to existing cases or top cases.Please enter the key number in the comments field during the ordering process. Scope of delivery: right side case + left side case + 2x lock adapters optional inner bags available in the accessory program Recommended load: 10kg per side case (Please note the model-specific notes of the respective carrier, as well as the motorcycle manufacturer-specific information)

The special Journey Topcase 30 is delivered with a universal mounting plate and installation accessories. This allows for attachment to almost any third-party luggage rack with a flat mounting surface, for which we do not offer a model-specific top case rack. not compatible with Hepco&Becker tube luggage racks, Alurack luggage racks, or Easyrack luggage racks waterproof case shell made of impact-resistant plastic includes universal mounting plate and installation materials includes key and lock cylinder extensive range of accessories available suitable for one helmet Recommended load: 3-5kg in the top case (Please note the model-specific instructions for each rack, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag.