200/55ZR17 (78W) TL Rear Tire Bridgestone RS11
€320.71*
Bridgestone Battlax RS11 SPORT MOTORCYCLE TIRE the race-inspired profile maximizes the contact patch the RS11 brings the V-MS-Belt from the racetrack to the road increased stability and traction through different rubber compounds in the center of the tire and on the sides Technical Data:Width: 200 Aspect Ratio: 55 % of widthConstruction: R (Radial tire) Rim Diameter: 17 inchesLoad Index: 78 Speed Index: (W) >270 km/h Profile: RS11 Manufacturer: Bridgestone Whitewall: No Tube Type: TL Reinforced: No Tire Type: Summer tire
Additional Bag High Visibility Size S 2 Liters Yellow/Black by Touratech Waterproof
€39.90*
To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g
AirMan Tour Air Compressor Pump for Motorcycles / Bicycles / Balls etc.
€29.90*
With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)
Alternator Cover Carbon - BMW S1000R (2014-2020) / S1000RR (2010-2018) / HP 4 (2012-now)
€199.90*
The carbon alternator cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) with partially attached using the alternator cover screws. and in the front area also glued on using a small dot on the alternator cover.
This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.Â
Badge - D=58MM for example BMW E36 R1200GS HP4Race R850R 51148164924
€48.71*
Original BMW Spare Part
Additional Information
The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:
Batterie Motorrad HJTZ7S-FP JMT ATLN 7070210
€73.08*
Lithium-ion batteries JMT, high tech for your motorcycle.
the latest generation of batteries identified by the red cover.
Spacer (S)
Battery is equipped with one or more spacers which are taped with adhesive tape under the battery so that the battery fits exactly into the battery box.
Waterproof (W)
The battery is fully waterproof and is not damaged when the motorcycle is washed with high pressure.
Indicator (I)
All batteries are equipped with a battery condition - equipped Indicator.
Simply press the test button. Lights all three blue LEDs on the battery fully (ful) is loaded. Only light two LEDs, it is loaded only half (med). No later than when only one LED (low), the battery needs to be charged.
With the replacement of a standard lead-acid battery with a JMT lithium-ion battery up to 5 kg in weight can be saved, without any appreciable effort.
Following advantages speak for JMT lithium-ion batteries:
- about 1/3 of the weight of comparable lead acid battery
- unbeatable ratio of cost / weight saving
because they contain can be installed in any position, no acid -
- does not contain heavy metals
- balanced discharge / charge of all cells by Balancer
- quick charge with a high charging current (up to 90% in 6 min)
- very low self-discharge (max. 5% per month)
- even at high temperatures still good performance up to 60 ° C
- safe technology and high durability
Lead-acid batteries can only use 30% of their capacity due to the specific properties,
while in lithium-ion batteries almost 100% of the capacity can be used.
For this reason, the lithium versions of JMT batteries for the same start power need only 1/3 of the capacity of a comparable lead-acid battery.
A steady state of charge of all cells is also ensured by a built-in processor ( "balancer").
The dimensions of the lithium-ion batteries using adapters correspond to the dimensions of the original lead-acid batteries.
The connections are identical, so the battery can be replaced in a few minutes without further adjustments.
Please note that only suitable for charging chargers may be used. We recommend JMP chargers.
The maximum recommended charge currents please refer to the below specifications
No way chargers may be used, trying to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they start the actual charge.
The maximum charging voltage of 14.9 volts may be exceeded under any circumstances. Risk of explosion.
The manufacturer guarantees a sufficient initial capacity of up to -5 degrees Celsius.
technology
JMT lithium-ion batteries as a cathode material using iron phosphate (LiFePO4), and use the lithium-polymer process in the manufacture.
This allows them to rise even explode either in flames during normal operation.
The technique and method of manufacture to ensure the highest safety standards for lithium batteries.
- 12 V maintenance-free lithium-ion battery
- recommended charging current 1 A
- maximum charging current for quick charge 12 A
Comparable in dimensions and connections with:
Yuasa serial no
YTZ7S
YTX7L-BS
TTZ7S
Bellypan Street Carbon - BMW HP 4 (2012-now)
€899.90*
This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
BMC Replacement Air Filter for BMW S1000RR 2009-2018, S1000R 2013-2020, HP4
€91.63*
BMC Replacement Air Filter The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution. The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil. It is encased in an aluminum mesh that is treated with an epoxy solution to resist gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable. Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance. - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures
BMW HP4 2012-2016 Front Brake Pad Sinter SCR TRW HP2 Sport
€186.83*
Sinter Carbon Racing - High-performance racing compound - Meets the highest demands of professional racers - Excellent durability even under the toughest imaginable conditions with extremely high friction values - SCR pads are also suitable for use in endurance races. - The use of SCR pads is recommended exclusively under professional racing conditions. The SCR pads do not have ABE
BMW HP4 Front Brake Pad Sinter GPFAX EBC HP2 Sport
€145.98*
EBC GPFAX Formula Sintered Race Brake Pads - Perfect for Racing! The new GPFAX Formula Sintered Race Brake Pads replace the GPFA series.State-of-the-art sintered metal technology. The goal of the GPFAX pads is to surpass the Brembo Z04 pads, which they achieve more than well. The new material features an optimal heat cycle, feels better at the brake lever, and ensures quick bedding-in.GPFAX pads are suitable exclusively for the racetrack, not for the street (street machines).They provide the most uncompromising solution for racing machines. The material contains no toxic substances such as lead, nickel, or zinc. The GPFAX Formula Sintered Race Brake Pads are not TÜV certified and are only suitable for the racetrack!
BMW HP4 Front Brake Pad Sinter HH EBC HP2 Sport
€61.20*
EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.
BMW Liquid Gasket Loctite 5970 A10 50ml (29.49 € / 100 ml) 83190404517
€25.50*
Product Description:
original BMW workshop equipment
Contents 50 ml
29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany)
Safety data sheet available upon request
May cause allergic reactions
For professional users only
BMW Lubricant Grease Straburags (39.90 € / 100 grams) for Cardan Footrest Joints Gear Shift
€22.50*
BMW Lubricant Grease Straburags for
Cardan Footpeg Joints Shift Parts
Product Description:
original BMW workshop equipment
has been used for many years for e.g. cardan shafts, plug connections, joints
strongly adhesive
good corrosion protection
prevents tribocorrosion (combined effect of corrosion and wear)
water-resistant - even under outdoor conditions
approved by Knorr Brake N
(12006-1.23 product info available)
safety data sheet available upon request
contains Pin-2(3)-enes. May cause allergic reactions
content 50g
39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)
BMW Motorrad Schlüsselanhänger MLAR schwarz Schlüsselband
€11.27*
Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle
BMW original repair connector 3-pole 83300413586 e.g. R1200GS LC R nineT K1600GT C1 R1150GS
€14.95*
BMW Original Repair Connector 3-Pole
No. 611657
Item Description
This offer includes 1 repair connector 3-pole.
This offer applies to the red marked connector!!!
( Illustration No. 7 )
BMW Part Number: 83300413586
Fits various BMW motorcycles:
BMW Original Repair Connector 4-Pole 83300402340 e.g. R1200GS LC R nineT K1600GT C1 R1150GS
€16.95*
BMW Original Repair Connector 4-Pole
No. 610615
Item Description
This offer includes 1 repair connector 4-pole.
This offer applies to the red marked connector!!!
( Illustration No. 5 )
BMW Part Number: 83300402340
Fits according to part number for the following vehicles:
K50 (R 1200 GS) (10/2011 — 10/2016)
K51 (R 1200 GS Adventure) (09/2012 — 10/2016)
K52 (R 1200 RT) (01/2013 — 10/2016)
K53 (R 1200 R) (11/2013 — 10/2016)
K54 (R 1200 RS) (06/2014 — 10/2016)
K25 (R 1200 GS) (12/2002 — 12/2012)
K25 (R 1200 GS Adventure) (03/2005 — 07/2013)
K25 (HP) (08/2004 — 11/2008)
K26 (R 900 RT, R 1200 RT) (11/2003 — 06/2014)
K27 (R 1200 R) (11/2005 — 07/2014)
K28 (R 1200 ST) (05/2003 — 11/2007)
K29 (R 1200 S, HP2 Sport) (11/2004 — 07/2010)
K21 (R nineT) (01/2013 — 08/2016)
K23 (R nineT Scrambler) (09/2015 — 10/2016)
K40 (K 1200 S, K 1300 S) (04/2003 — 09/2015)
K43 (K 1200 R, Sport, K 1300 R) (03/2004 — 07/2015)
K44 (K 1200 GT, K 1300 GT) (11/2004 — 10/2010)
K42 (HP4) (09/2011 — 07/2014)
K46 (S 1000 RR) (09/2008 — 10/2016)
K47 (S 1000 R) (02/2013 — 07/2016)
K49 (S 1000 XR) (05/2014 — 09/2016)
K48 (K 1600 GT, K 1600 GTL) (01/2010 — 10/2016)
K70 (F 700 GS) (06/2011 — 10/2016)
K71 (F 800 S, F 800 ST, F800GT) (12/2004 — 09/2016)
K72 (F 650 GS, F 800 GS) (10/2006 — 10/2016)
K75 (F 800 GS Adventure) (05/2012 — 10/2016)
K73 (F 800 R) (12/2005 — 09/2016)
R13 (F 650 GS, GS Dakar) (02/1999 — 10/2007)
K14 (F 650 CS) (11/2000 — 07/2005)
K18 (C 600 Sport, C 650 Sport) (02/2011 — 10/2016)
K19 (C 650 GT) (01/2011 — 10/2016)
R13 (G 650 GS) (02/2008 — 10/2015)
R13 (G 650 GS Sertão) (07/2010 — 11/2014)
259 (R 850 GS, R 1100 GS) (04/1993 — 07/2006)
R21 (R 1150 GS) (09/1998 — 11/2003)
R21 (R 1150 GS Adventure) (07/2001 — 09/2005)
259R (R 850 R, R 1100 R) (09/1993 — 11/2002)
259 (R 850 RT, R 1100 RT) (05/1994 — 11/2001)
R28 (R 850 R, R 1150 R, Rockster) (11/1999 — 07/2007)
R22 (R 850 RT, R 1150 RT, R 1150 RS) (01/2000 — 03/2006)
259C (R 850 C, R 1200 C) (04/1996 — 07/2004)
259 (R 1100 S, R 1100 RS) (01/1992 — 07/2005)
259C (R 1200 C Montauk) (10/2002 — 10/2004)
259C (R 1200 C Independent) (05/2000 — 08/2004)
K30 (R1200 CL) (10/2001 — 07/2004)
K589 (K 1100 RS, K 1100 LT) (06/1989 — 04/1999)
K589 (K 1200 RS, K 1200 LT) (04/1996 — 07/2008)
K41 (K 1200 GT, K 1200 RS) (03/2000 — 07/2005)
C1 (10/1999 — 04/2003)
BMW S1000 R RR XR HP4 HP Race original BMW air filter air filter insert
€40.65*
BMW Original Spare Part
Air Filter Insert
Top Brand Quality
BMW S1000RR 2009-2018 S1000R 2013-2020 Racing Air Filter BMC HP4 + Race
€98.18*
BMC Racing Filter In addition to the standard filter version, BMC has developed another type of filter. This is the "Race" filter, which maintains the same shape as the standard filter but is constructed from filter material that allows for increased airflow compared to other filter systems, while still retaining its filtering effectiveness. The BMC "Race" filter is designed for those who are not satisfied with the normal performance of their motorcycle, but instead modify the engine and the control unit to achieve increased power. The "Race" filter can be recognized by a yellow stripe.
BMW S1000RR 2009-2018 S1000R 2013-2020 S1000XR 2015-2019 Air Filter Mahle HP4 + Race
€41.57*
Mahle Air Filter Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions. With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences. Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.
BMW tank bag 8-13 liters "
€175.00*
From the new tank bag series by Hepco & Becker in the Tourer M variant. Thanks to the newly developed Lock-It System, the tank bag can be quickly and easily attached and detached. It also allows for individual positioning and adjustment to your motorcycle model through a mounting channel in the bottom of the tank bag. For installation, the corresponding specific tank ring from Hepco & Becker for your motorcycle is required.This must be ordered separately.
The counter holder, which is mounted to the bag, is included with the tank ring. If you want to use this tank bag as a second tank bag on yourtank ring, you will need an additional counter holder. Item: 506000
Material• 100% polyester (water-repellent coated) and PE foam (100% polyethylene)• reinforced side walls for shape retention, stable base shell made of EVAComfort/Features• Organizer pockets, map and navigation pocket integrated in the lid• All-round zipper for volume expansion, lockable 2-way zipper• 3M-SCOTCHLITE™ reflective piping, carrying handle, luggage hooks, and carrying strap• Cable outlet, integrated rain coverMounting• on the Lock-It tank ring (vehicle-specific for many models, sold separately; see tank rings in the menu)• individual positioning through mounting channelSize/VolumeVolume: 8-13 ltr.External dimensions WxDxH240 x 330 x 180 mm (240 mm max.)
Bremsklotz Carbon CRQ TRW
€72.10*
- CRQ- Belagmischung- racing pad suited to Carbonbasis- Only for Rennstrecke- Higher durability than SRQ Lower hand strength and good Kaltreibwert- for high performance inserts
Bremsklotz Sinter SCR TRW Alternative: 7320012
€186.83*
Sinter Carbon Racing - High-performance racing mix - Meets the highest demands of professional racing driver - excellent durability in the toughest imaginable loads with extremely high Reibwerten- SCR - coverings are also available for use in Endurance - suitable race. - It is the use of SCR coverings exclusively professional racing sport conditions recommended. The SCR pads are not TÜV approved
Bremsklotz Sinter SR Brembo Alternative: 7321599
€83.66*
SR Sintermetall Rennbremsbelag für Vorne
Dies ist ein Material, das unter allen Betriebsbedingungen sehr stabil bleibt.
Mit einer hohen Bremsleistung im heißen Zustand und einem guten Reibungskoeffizienten im kalten Zustand ist es auch für den schnellen Straßeneinsatz geeignet und somit ideal für Motorräder, die sowohl auf der Straße als auch auf der Rennstrecke eingesetzt werden.
Bremsklotz Sinter vorne TRW Alternative: 7322456
€54.78*
SV - BelagmischungVollmetallischer sinter pad with special lacquering .High friction guarantees very good performance .On nearly all disks used .Only in exchange for sintered pads in the initial .Only due in racing use, there no heat resistance can be used from 400 degrees .Only for front axle.
HP4
Welcome to the category for BMW Sport HP4 spare parts & accessories!
Here you will find a wide selection of high-quality spare parts and accessories for your BMW Sport HP4 motorcycle.
Our products offer you:
- High-quality quality
- Affordable prices
- A wide range of products
- Easy ordering
Discover our range now and find the right parts for your motorcycle!
Order today and take advantage of our attractive offers!
Produktempfehlungen:
Tip
Action bundle 1: Engine protection *RALLYE* + Engine crash bars for Honda CRF1000L Africa Twin
€399.00*
With the RALLYE engine protection for the Honda CRF1000L Africa Twin, we combine state-of-the-art manufacturing techniques with unique design for the best possible protection. The Touratech engine crash bars provide optimal protection for the important side covers of the engine. Its slim design allows for riding challenging single trails off-road while not restricting lean angles on the road in any way.Note: Not suitable for Honda CRF1000L Africa Twin with DCTOnly in conjunction with the original exhaust manifold
Tip
Action Bundle 2: Engine Protection *RALLYE EXTREME* + Crash Bars for Honda CRF1000L Africa Twin
€449.00*
With the RALLYE EXTREME engine protection for the Honda CRF1000L Africa Twin, we combine state-of-the-art manufacturing techniques with unique design to provide the best possible protection for the entire engine area of your bike! Under the toughest testing conditions, the RALLYE EXTREME engine protection has already proven its quality on the winning motorcycle of the Hellas Rally. The crash bar is made from high-quality, electropolished stainless steel and expands the usability of your adventure bike. Its special design ensures optimal force distribution and largely protects not only the radiator but also the tank and fairing from damage.The RALLYE EXTREME engine protection is designed for serious use with minimal weight. It takes on the functions of the engine crash bar.Note: Only in conjunction with the original header pipe
Tip
Action Bundle 3: Engine Protection *RALLYE* + Engine Crash Bar + Crash Bar for Honda CRF1000L Africa Twin
€497.90*
With the RALLYE engine protection for the Honda CRF1000L Africa Twin, we combine state-of-the-art manufacturing techniques with unique design for optimal protection. The Touratech engine crash bar provides essential protection for the important side covers of the engine. Its slim design allows for riding challenging single trails off-road while not restricting lean angles on the road in any way.The crash bar is easy to install, resistant to rust, and easy to maintain. Its special construction ensures optimal force distribution and largely protects the radiator, tank, and fairing from damage.Note: Not suitable for Honda CRF1000L Africa Twin with DCTOnly in conjunction with the original header
Tip
AERO ABS Seitenkoffer-System für BMW R 1200 R/RS (2015-) und R 1250 R/RS (2018-)
€449.00*
AERO ABS Seitenkoffer-SystemAerodynamisches
Design, geringes Gewicht, komfortable Details: Der AERO ABS
Seitenkoffer besticht durch seine windschnittige Form und die moderne,
besonders pflegeleichte Oberfläche. Die Seitenkoffer aus hochbelastbarem
ABS-Kunststoff bieten pro Seite 25 l Stauraum bei nur 1,8 kg
Eigengewicht und sind in Kombination mit den abnehmbaren Seitenträgern
von SW-MOTECH die ideale Gepäcklösung für sportliche Motorradreisende.Die
Seitenträger sind extrem belastbar und nah ans Fahrzeug konstruiert.
SW-MOTECH fertigt die Seitenträger aus robustem Stahl, der anschließend
mit einer schwarzen Pulverbeschichtung versehen wird. Das patentierte
QUICK-LOCK System ermöglicht den schnellen An- und Abbau des Trägers –
nach einer Vierteldrehung an den Anbaupunkten lässt sich der Träger
komplett abnehmen und schon verbleiben am Motorrad nur unauffällige
Trägerpunkte.
EVO SeitenträgerAbnehmbarer Kofferträger zur Verwendung für fast alle gängigen Koffer-SystemeSekundenschneller An- bzw. Abbau mit Schnellverschlüssen an unauffälligen BefestigungspunktenMit
separat erhältlichem SW-MOTECH Kofferadapter verwendbar für Koffer der
Marken TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker, ShadAus ovalem Rundrohr dicht ans Fahrzeug konstruiertHohe Funktionalität und StabilitätDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 3,7 kgBreite angebaut an Motorrad: 49,0 cmHinweisAls Diebstahlschutz empfehlen wir QLS.00.046.10100/BBitte beachten Sie, dass entsprechend der anzubringenden Koffer, ein Adapterkit benötigt wird! (Aufgeführt unter Zubehör)
Adapterkit für EVO SeitenträgerAdapterkit zur Befestigung von AERO ABS Seitenkoffern an SW-MOTECH EVO-SeitenträgerZur Montage an den vorhandenen Bohrungen des SW-MOTECH EVO SeitenträgersFür links und rechtsDetailsFarbe: schwarzGesamtgewicht: ca. 0,2 kg
AERO ABS Seitenkoffer-SetLeichte und robuste Seitenkoffer für sportliche MotorradreisendeSichere Befestigung per Schnellverschluss an den abnehmbaren PRO/EVO Seitenträgern von SW-MOTECHModellspezifische PRO oder EVO Seitenträger sind separat erhältlichDiebstahlschutz durch Sicherung am Seitenträger, abschließbaren Reißverschluss und mitgeliefertes Motorradtaschen-Schloss25 l Stauraum pro Koffer bei nur 1,8 kg EigengewichtKomfortable
Innenausstattung: gepolstertes Textilfutter, elastische
Kreuzspanngurte, Netztasche, Tasche zum Verstauen des
Motorradtaschen-SchlossesKomplett öffnen auf dem Hotelbett oder nur teilweise aufklappen: Öffnungsbegrenzer mit Clip-Verschluss sichern den KofferinhaltTragegriff erlaubt komfortables Tragen von zwei Koffern mit einer HandReflektierende Details für mehr Sicherheit im StraßenverkehrStrukturierte Oberfläche ist pflegeleicht und kratzunempfindlich und verleiht den AERO ABS Seitenkoffern eine moderne OptikAus hochbelastbarem, witterungs- und UV-beständigem 2,5 mm (Innenschale) und 2 mm (Außenschale) starkem ABS-Kunststoff gefertigtWasserdichte Innentaschen im Lieferumfang enthaltenDetailsMaterial: ABSFarbe: schwarzMaße: 52,0 x 22,0 x 39,0 cmGesamtgewicht: ca. 5,4 kgGesamtvolumen: 25,0-50,0 lFür Montage erforderlichDie
abnehmbaren Seitenträger sind separat erhältlich. In den AERO ABS
Seitenkoffer-Systemen sind sie bereits im Lieferumfang enthalten.Achtungnicht für den Offroad-Einsatz geeignet
Diebstahlsicherung für EVO SeitenträgerDiebstahlschutz für EVO SeitenträgerMit den Diebstahlsicherungen können zwei beliebige Schnellverschlüsse ersetzt werdenSet für rechten und linken EVO Seitenträger, bestehend aus 2 gleichschließenden Schlössern und 2 identischen SchlüsselnDetailsFarbe: schwarzGesamtgewicht: ca. 0,2 kgHinweisFür
alle, die nur einen Schlüssel für Koffer und Diebstahlsicherung
verwenden möchten: Der TRAX Schloss-Satz mit EVO Diebstahlsicherung
QLS.00.046.15000 enthält 8 gleichschließende Schlösser für die
Seitenkoffer und das Topcase der Serien TRAX ADV und ION sowie die
Diebstahlsicherungen der EVO Seitenträger.
Lieferumfang2 x AERO ABS Seitenkoffer2 x wasserdichte Innentaschen2 x Motorradtaschen-Schlösser2 x EVO Seitenträger2 x Adapterkit für EVO Seitenträger2 x Diebstahlsicherung für EVO SeitenträgerAnbauanleitungMontagematerialDetailsFarbe: schwarzGesamtgewicht: ca. 9,7 kgGesamtvolumen: 25,0-50,0 lGenehmigungshinweisDieses
Produkt muss nicht zugelassen werden. Es benötigt daher auch keine
Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die
Informationen in der Anbauanleitung sind zu beachten.
Tip
BMW Motorrad Jacket Moreno Connect GORE-TEX
€1,222.54*
Details
The
Moreno Connect GORE-TEX jacket combines a discreet look with excellent
functionality. The three-layer outer material keeps the jacket
waterproof, while generous ventilation options ensure an optimal climate. Back and joint protectors provide a high level of safety even off paved roads. The integrated heated vest can be controlled via smartphone or motorcycle. Active lighting on the back and sleeves ensures better visibility at night.Product HighlightsRobust, waterproof touring jacketOptimal ventilation through numerous zippers and AirVent insertsThree-layer outer materialSafety featuresNP2 joint protectorsNP Pro back protectorSafety FeaturesNP2 joint protectorsNP Pro back protectorFunctionalityTwo waterproof pockets on the front, one large pocket on the backCollar closure with VelcroInfinitely adjustable sleeve adjustment with VelcroStorm cuff at the sleeve hemsLeg closure with infinitely adjustable VelcroWaist adjustmentWaist adjustment, Velcro with diversionShort and continuous connecting zipperAdditional windbreaker in the jacket hem (similar to a winter sports jacket)Extra-large hanger loopIntegrated heated vestActive lighting on the back and sleeves for better visibility at night or in poor visibility conditionsWaterproof, washable, and integrated light guideTouch panel with on and off switchControl unit for operating the Connect functions of the heated vest and lightingControl unit can be connected to the BMW Motorrad Connected AppPower supply for the control unit via power bank or directly from the motorcycleThree inner pockets, one designed as a charging pocket for the smartphoneWaterproof up to a water column of 28,000 mmKey DataMaterial composition:Outer material 1: Layer 1 100% nylon, Layer 2 100% expanded polytetrafluoroethyleneOuter material 2 (insert): Layer 1 92% nylon, 9% elastane, Layer 2 69% nylon, 31% elastaneLining: 100% polyester
Tip
Clutch Release Lever Clutch Lever for BMW R 850 1100 R RS RT GS 23131340829
€150.00*
Clutch Release Lever Clutch Lever
for R850 + R1100 transmission with clutch cable
Improved version
Due to numerous requests from you, we have searched for a solution to a common problem and developed this improved clutch release lever. It is mounted on the back of the transmission and accommodates the clutch cable.
Never again should your tour abruptly end somewhere in the middle of nowhere. The clutch release levers often break at the bottom of the transmission. Original spare parts are often unavailable. Therefore, we have manufactured a reinforced clutch lever from high-strength aluminum. We have increased the material thickness by about 30%. During the next transmission repair or clutch replacement, this lever can replace the original, reducing a critical point on your motorcycle. Alternatively, you can take it as a spare part (emergency tool) on your travels for emergencies. We have already saved some of you on vacation, trips, or tours with a DHL Express delivery. This option is, of course, also available. As roadside assistance, we ship spare parts, like this lever, as well as many other items, around the globe to help you. This lever corresponds to the BMW ETK part number 23131340829.
The lever 23 13 1 340 829 fits the following vehicles:
R 850 GS Type 259
R 1100 GS Type 259
R 850 R Type 259
R 1100 R Type 259
R 850 RT Type 259
R 1100 RT Type 259
R 1100 RS Type 259
NOTE: The original bearing sleeve and adjustment screw must be retained!
Tip
Touratech Crash Bars Stainless Steel for BMW F850GS/F750GS
€329.90*
The crash bar is made from high-quality, electropolished stainless steel and expands the range of use for your adventure motorcycle. The two-part crash bar has been positioned as closely as possible to the vehicle to harmoniously integrate it into the existing vehicle design. Its special construction ensures optimal force distribution and largely protects not only the radiator but also the tank and fairing from damage. The crash bar is easy to install, resistant to rust, and easy to maintain.