Replacement cover for tool box luggage carrierIncludes lock and 2 keys

The Travel side bag, with its 40 liters of volume, is the ideal companion for your next motorcycle trip.Thanks to the robust click closures, easy access and secure closing of the hard shell lid is guaranteed. The proven roll closure under the lid keeps the contents safe and waterproof in the bag. The mesh pocket inside the bag holds small items.The new Travel soft luggage series combines practical functionality with a distinctive design. The bags are welded waterproof, and the particularly robust Cordura material ensures long durability. The highlight of this new luggage system is the hard shell lids, which provide additional robustness to the bags.Additionally, there is a Molle system on the lid, where extra items can be attached. For passive safety and a distinctive look, reflective lettering and also reflective sections behind the side Molle patches provide visibility.The handle allows for comfortable handling after removing the bag. The D-rings can be used to attach the optionally available carrying strap, so you can keep your hands free.The Travel side bag fits perfectly on most luggage racks made of 18 mm round tube - like our Touratech luggage racks. The completely newly developed locking mechanism allows for easy attachment and equally easy removal from the luggage rack. The bag stays securely in place. Thanks to the lock preparation, you can retrofit optionally available locks that match your Touratech cases, navigation mounts, oil plugs, etc. This way, the bag is protected against theft, and you can continue to use your Touratech locking system key.- Waterproof- Up to 40 liters of volume- High-quality workmanship made in the EU- Optional locks available- Optional carrying strap available- Quick to attach and quick to remove- Suitable for most straight luggage racks made of 18 mm round tube

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered suspension.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5276-0 for that.Attention: Regardless of the model year, different side stands have been installed, so we recommend checking the shape of your side stand as well.Please use for: - Wide shape 01-045-5276-0- Narrow shape 1021-01-045-5275-0

Without a functioning side stand switch, your ride with the GS-Adventure is immediately over, as the ignition is interrupted.With the Touratech side stand switch protection, this extremely important component is perfectly protected from damage. Neither the tip of your boots nor branches or stones can harm it.Made from 1.5 mm thick stainless steel and supplied with all the necessary parts for installation, this nearly indestructible protection can be easily and quickly mounted.An absolute safety plus, both on and off-road!

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in no time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Color: black

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in a very short time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide a stunning effect with minimal effort!Color: black

In rainy rides, the rear wheel often splashes dirt and water directly onto your boots and legs. These high-quality, super lightweight plastic parts prevent this effect and also look great. Sold as a set for both sides.

The black anodized splash guard is mounted behind the license plate holder and extends it downwards and backwards. It effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. The aluminum splash guard additionally stabilizes the license plate and prevents it from vibrating loose. Material: black anodized aluminum

This special spoiler for the windshield of the BMW R1250GS/R1200GS allows for comfortable riding on long, fast stretches. Air turbulence and wind pressure on the helmet are significantly minimized.It is simply clipped onto the windshield and locked in place with a quick-release mechanism. For off-road use, the spoiler can be easily and quickly removed in seconds.A high-quality branded lock secures the spoiler against unauthorized removal. The locks are also available keyed alike with our ZegaCase and GPS mount locks.

The Touratech EVO X luggage rack made of stainless steel for the R1250GS/R1200GS is a sturdy luggage rack for the Touratech ZEGA EVO X cases. The perfect luggage system for long journeys.It not only visually matches the frame of the GS but is also a non-corrosive system made from 18 mm stainless steel tubing, ensuring particularly high stability even off the beaten path.Typical for the EVO X special system is the cutout on the right case, allowing it to snugly fit around the exhaust. The cases are positioned closer to the center of the vehicle, reducing the overall width and giving the system a more harmonious appearance due to the symmetrical case lids.Practical benefits and user-friendliness:The ZEGA Evo offers even easier attachment while maintaining absolute stability - even in tough off-road conditions! It combines optimal ergonomics and absolute comfort without compromising reliability.The case as part of the luggage system:The ZEGA Evo X, like all cases from Touratech, was not developed as an isolated product but is designed from the outset as part of a luggage system. The outstanding practical benefits result from the unique combination of a beautifully designed yet indestructible case, a brilliant mounting mechanism, and a rugged carrier made from 18 mm thick stainless steel tubes.Stainless steel luggage rack special system for ZEGA Evo X- made from 18x2 mm stainless steel tubing- also suitable for tough off-road use- no restriction for the passenger- fits elegantly into the overall look of the BMW R1250GS/R1200GS- easy assembly / disassemblyThe installation is done at existing mounting points. With just a few screws, the very robust construction is securely mounted or dismounted for off-road use. The mounting brackets remain unobtrusively on the motorcycle.Scope of delivery:1 x luggage rack with mounting materialsYou will need 1x ZEGA Evo case and 1x ZEGA Evo X case.Order together with: Exhaust extension for original exhaust 01-045-5597-0 (not included in the delivery.)

Protects the starter from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

Protects the starter from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

The lowering by 50mm for your BMW R1200GS/R1250GS with BMW DDC auto-leveling equipment. This Touratech Suspension DDA / Plug & Travel Premium chassis is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adapts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -50mm- Touratech Suspension DDA Plug & Travel rear shock absorber -50mm- Ready for installation with connection plug and wiring. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS/R1250GS, the side stand and/or center stand must be adjusted.The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. You will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

Now it's time for some color! Even those who are not looking for a classic black tank bag, but want a model that attracts attention with its fresh, sporty color combinations will find what they need with us!Our "Ambato Exp limited red" offers the outstanding features and quality of the Ambato Exp tank bags in an exciting combination with an exclusive mix of colors and materials. Black or colorful? The decision is not easy, we leave it to your personal taste!-Vehicle-specific, precisely fitting base plate for a play-free and stable hold on the vehicle-Inserts made of robust and waterproof tarpaulin-We do not use simple nylon, but certified Cordura fabric as used in motorcycle protective clothing and expedition gear-Stable base body and lid made of high-quality, water-repellent and abrasion-resistant 1100 dtex Cordura -Outer pockets and inserts made from 560 dtex Cordura-Fabric inner side waterproof coated -Fluorocarbon impregnation and Teflon coating with nano-technology as protection against moisture, dirt, oil, and fading-Washable and easy to clean -The fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-Reflective inserts from 3M Scotchlite ensure best visibility-Ergonomic, stable carrying handle for practical transport away from the motorcycle-Easily expandable via a circumferential zipper-Built for extreme loads and long durability -Best fit-Inner pocket with Velcro closure in the lid for documents and additional cards-Organizer with mini pocket for toll cards, credit cards, and loops for pens or small flashlights on the inside of the lid-Easy-to-use front fastening with click closures-Stable, play-free fastening at the back with large-area Velcro-Secure attachment yet quick to remove from the vehicle-Removable in seconds for refueling-Map pocket with Velcro attachment and large opening included-Carrying straps for use as a shoulder bag or backpack are included-Low weight with high payload and large usable volume-Water-protected, high-quality zippers-Elastic, reflective rubber bands with quick-release for quick attachment of gloves or rain jackets -Waterproof inner pockets available as an option-Rain cover available as an option-Due to the special cut of the side pockets, no additional "horn protection bracket" is needed-Practical, spacious side pockets with generous expansion folds-Large main compartment without disturbing dividers for maximum space and individual loading-Water-repellent cable passage for charging cables or other power supply inside-Clear view of the instruments or mounted navigation devices-Interesting, exclusive material mix with refreshing design-All luggage systems are handcrafted with great care-No annoying improvisation with "universal mounting kits" and poor fit; the luggage systems are vehicle-specific developed, and the installation and durability have been tested by us-Foamed base plate with non-slip, rubberized underside and neoprene inner side without seams-The measurement of the volume is practical and honest with the bag mounted on the vehicle and not, as is often the case, by estimation or approximate calculationAttention: Please use a paint protection film if necessary! (Item number 01-101-0100-0)Dimensions: (L x W x H) approx. 37 x 27 x 22/32 cm; Volume: approx. 13/20 liters Color: black/red

The TFT display of your GS is more than just a display instrument. It is the central communication unit in the interaction between man and machine. With its extensive functionalities, it is unfortunately also a very expensive component.Did you know that your TFT display is only secured with three rather weakly dimensioned retaining rings? A strong pull on the housing and the entire TFT unit is gone.With the TFT theft protection, this quick but costly "theft" is excluded!The version with "sun visor" additionally features a 45mm long glare shield.The simultaneous use of Touratech or BMW navigation device holders is not restricted.Safe and lightweight:037-5177: 2mm aluminum, black anodized037-5178: 2mm aluminum, black anodized, with sun visorSafe and solid:037-5175: 2mm stainless steel, black powder-coated037-5176: 2mm stainless steel, black powder-coated, with sun visor

The TFT display of your GS is more than just a display instrument. It is the central communication unit in the interaction between man and machine. With its extensive functionalities, it is unfortunately also a very expensive component.Did you know that your TFT display is only secured with three rather weakly dimensioned retaining rings? A strong pull on the housing and the entire TFT unit is gone.With the TFT theft protection, this quick but costly "theft" is excluded!The version with "sun visor" additionally features a 45mm long glare shield.The simultaneous use of Touratech or BMW navigation device holders is not restricted.Safe and lightweight:037-5177: 2mm aluminum, black anodized037-5178: 2mm aluminum, black anodized, with sun visorSafe and solid:037-5175: 2mm stainless steel, black powder-coated037-5176: 2mm stainless steel, black powder-coated, with sun visor

The TFT display of your GS is more than just a display instrument. It is the central communication unit in the interaction between man and machine. With its extensive functionalities, it is unfortunately also a very expensive component.Did you know that your TFT display is secured with only three rather weakly dimensioned retaining rings? A strong pull on the housing and the entire TFT unit is gone.With the TFT theft protection, this quick but costly "theft" is excluded!The version with "sunshade" additionally features a 45mm long glare shield.The simultaneous use of Touratech or BMW navigation device holders is not restricted.Safe and lightweight:037-5177: 2mm aluminum, black anodized037-5178: 2mm aluminum, black anodized, with sunshadeSafe and solid:037-5175: 2mm stainless steel, black powder-coated037-5176: 2mm stainless steel, black powder-coated, with sunshade

The TFT display of your GS is more than just a display instrument. It is the central communication unit in the interaction between man and machine. With its extensive functionalities, it is unfortunately also a very expensive component.Did you know that your TFT display is only secured with three rather weakly dimensioned retaining rings? A strong pull on the housing and the entire TFT unit is gone.With the TFT theft protection, this quick but costly "theft" is excluded!The version with "sunshade" additionally features a 45mm long glare shield.The simultaneous use of Touratech or BMW navigation device holders is not restricted.Safe and lightweight:037-5177: 2mm aluminum, black anodized037-5178: 2mm aluminum, black anodized, with sunshadeSafe and solid:037-5175: 2mm stainless steel, black powder-coated037-5176: 2mm stainless steel, black powder-coated, with sunshade

A MUST for every GS, because without this cover, the BMW simply doesn't look complete!The throttle body cover integrates harmoniously into the bodywork of the BMW R 1250 GS / R 1200 GS (LC) from 2017 onwards. Easily mounted with two screws, the cover elegantly conceals the throttle body. The look and feel of the product match the high-quality appearance of the surrounding BMW plastics.Originally finished in black, the cover made of super lightweight polyamide can also be painted in different colors to create an interesting visual accent.

Dissatisfied with the original windscreen of your motorcycle? Thanks to countless kilometers of adventure experience and our production know-how, we have developed a windscreen that combines appealing adventure design with optimal functionality for every application.Experience noticeably better riding characteristics with the Touratech windscreen compared to the original screens! The upper edge of the windscreen is based in shape and function on our experiences in rally sports. Aerodynamically optimized, the airflow is directed over the rider's head without unnecessary turbulence. This means the screen is not only flutter-free but also guarantees a relaxed and fatigue-free riding pleasure for both the rider and passenger.The Touratech windscreen gives your motorcycle a unique look that will impress you. Of course, we have thoroughly tested the windscreen for your machine. You will receive a windscreen that enhances your motorcycle not only technically but also visually.- Specifically developed for your motorcycle- Aerodynamically optimized shape- Flutter-free even at higher speeds- Minimized air turbulence- Fatigue-free riding - Cool adventure lookAvailable in various sizes and tints.- Size: M- Tint: tintedFor your GS model year 2013, you will also need the set of rubber bushings 01-045-5349-0.

Unhappy with the original windscreen of your motorcycle? Thanks to countless kilometers of adventure experience and our production know-how, we have developed a windscreen that combines appealing adventure design with optimal functionality for every application.Experience noticeably better riding characteristics with the Touratech windscreen compared to the original screens! The upper edge of the windscreen is based on our experiences in rally sports in both form and function. Aerodynamically optimized, the airflow is directed over the rider's head without unnecessary turbulence. This means the screen is not only flutter-free but also guarantees a relaxed and fatigue-free riding pleasure for both the rider and passenger.The Touratech windscreen gives your motorcycle a unique look that will impress you. Of course, we have thoroughly tested the windscreen for your machine. You will receive a windscreen that enhances your motorcycle not only technically but also visually.- Specifically developed for your motorcycle- Aerodynamically optimized shape- Flutter-free even at higher speeds- Minimized air turbulence- Fatigue-free riding - Cool adventure lookAvailable in various sizes and tints.- Size: L- Tint: tintedFor your GS model year 2013, you will also need the set of rubber sleeves 01-045-5349-0.

Dissatisfied with the original windscreen of your motorcycle? Thanks to countless kilometers of adventure experience and production know-how, we have developed a windscreen that combines appealing adventure design with optimal functionality for every application.Experience noticeably better riding characteristics with the Touratech windscreen compared to the original screens! The upper edge of the windscreen is based in shape and function on our experiences in rally sports. Aerodynamically optimized, the airflow is directed over the rider's head without unnecessary turbulence. This means the screen is not only flutter-free but also guarantees a relaxed and fatigue-free riding pleasure for both the rider and passenger.The Touratech windscreen gives your motorcycle a unique look that will impress you. Of course, we have thoroughly tested the windscreen for your machine. You will receive a windscreen that enhances your motorcycle not only technically but also visually.- Specifically developed for your motorcycle- Aerodynamically optimized shape- Flutter-free even at higher speeds- Minimized air turbulence- Fatigue-free riding - Cool adventure lookAvailable in various sizes and tints.- Size: S- Tint: tintedFor your GS model year 2013, you will also need the set of rubber sleeves 01-045-5349-0.

Dissatisfied with the original windscreen of your motorcycle? Thanks to countless kilometers of adventure experience and production know-how, we have developed a windscreen that combines appealing adventure design with optimal functionality for every application.Experience noticeably better riding characteristics with the Touratech windscreen compared to the original screens! The upper edge of the windscreen is based in shape and function on our experiences in rally sports. Aerodynamically optimized, the airflow is directed over the rider's head without unnecessary turbulence. This means the screen is not only flutter-free but also guarantees a relaxed and fatigue-free riding pleasure for both the rider and passenger.The Touratech windscreen gives your motorcycle a unique look that will impress you. Of course, we have thoroughly tested the windscreen for your machine. You will receive a windscreen that enhances your motorcycle not only technically but also visually.- Specifically developed for your motorcycle- Aerodynamically optimized shape- Flutter-free even at higher speeds- Minimized air turbulence- Fatigue-free riding - Cool adventure lookAvailable in various sizes and tints.- Size: M- Tint: transparentFor your GS model year 2013, you will also need the set of rubber bushings 01-045-5349-0.