Reinforcement Bracket for Engine Protection Bracket 5016514 for BMW R 1250 GS (2018-) additional stability in extreme use this bracket supports the stability of the Hepco&Becker engine protection bracket

This product is not intended for installation by an end consumer. Installation should only be performed by individuals with the appropriate professional training or by a certified automotive workshop. For this reason, no installation instructions are included with the product. Prices are exclusive of installation costs. Additional Information

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 55 N/mm Front for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. Replacing only one component will not achieve optimal handling. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 150N/mm Rear for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. When replacing only one component, optimal handling is not achieved. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Replacement spring linear (55 N/mm) front for original shock absorber. - Replacement spring linear (150 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.                        

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

RockerCover Cover (Left) Carbon - BMW R 1250 GS. R 1250 R. and R 1250 RS from 2019 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Hattech continues the classic and proven path with the new exhaust systems SS12-PS, which defines Hattech as a manufacturer of high-quality and durable stainless steel exhaust systems.Details about the silencer:SS12-PS: An exhaust variant that appeals to every GS rider who desires a deep, bassy sound in every RPM range. completely made of stainless steel all components welded using the TIG process available polished or brushed pleasant, sonorous, bassy sound at the volume level of the original noise reduction insert in the silencer outlet performance and torque-strong silencer no droning during luggage operation EU type approval No registration in the vehicle documents necessary Approximately 600 grams lighter than the original silencer All mounting parts included in the delivery This item is a custom-made product. It is handcrafted in Germany. Therefore, a production time of up to 4 weeks is possible!

Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information

Satz Dichtringe Gabel Gabelsimmerringe für BMW R1200GS LC +Adv., R1250GS + Adventure, R1200RT LC, R1250RTAngeboten wird hier ein NeuteilFahrzeug: R1200GS LC + Adv., R1250GS + Adv., R1200RT LC, R1250RT Hersteller: BMW Zustand: NEU Beschreibung: Wird verkauft wie abgebildet. Besteht aus 2 Staubkappen, 2 Gabelsimmerringen, 2 Sicherungsringen (Sprengringe) und 2 Unterlegscheiben.Neupreis: 51,57 € Teilenummer: 31428532723

Satz Kofferhalter

Angeboten wird hier ein Neuteil Fahrzeug: K50 R1200GS ab 2017 R1250GS / K51 R1250GS Adventure / K52 R1200RT LC R1250RT Hersteller: BMW Zustand: Neu Beschreibung: wird verkauft wie abgebildet Teilenummer:31428548943

The high-quality material mix of plastic and stainless steel combines stability, low weight, and a unique appearance. Manufactured on precision machines, these protective parts fit perfectly and are incredibly easy to install. Supplied as a set for both sides.The fairings made from a plastic/stainless steel mix are easy to mount and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side fairings not only protect against splash water on the road and kicked-up dirt during off-road rides but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side fairing is connected by a high-quality laser-engraved stainless steel part, creating a perfect and easily removable unit. This also reduces the risk of snagging your boot on the vehicle frame, preventing any gear from unintentionally getting caught on the vehicle.Suitable for installation of the DIN ISO 4165 on-board socket (standard equipment from EURO5)

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, and a short break is included. But it's easier said than done. Parking the vehicle on soft ground is a real issue! A small board or a similar base is usually never at hand when needed.Touratech has the solution:With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. Thanks to a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Fits only with original BMW side stands for lowered chassis.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

8-piece tire repair kit for tubeless tires with tire repair sealing strips, tools, and the new Plug Bond from Slime- for motorcycles, quads, ATVs, cars, SUVs, lawnmowers, trailers, agriculture, and many more- tire repair kit with the new, non-toxic, safe, and patented Plug Bond from Slime- for quick and easy repair of flat tires without having to remove the wheel!- suitable only for emergencies and short-term repairs on motorcycles and cars: Have the tire repaired by a professional immediately after use for safety reasons!- contents: reamer, insertion tool with T-handle, 5x vulcanizing sealing strips, Plug Bond- new sealing strips can be purchased separately

Perfect protection and value retention for your GS! Our side covers fill two unsightly gaps in the rear area of the R1200GS and are not only visually appealing and perfectly shaped, but also practical!Experience over many years has shown that protecting the painted frame tubes in the boot area is absolutely necessary.Side Covers:The covers made from a mix of plastic and stainless steel are easy to install and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side covers not only protect against splash water on the road and kicked-up dirt during off-road rides, but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side cover is connected by an anodized, high-quality laser-engraved stainless steel part to form a perfect and easily removable unit. This also reduces the risk of getting caught with your boot on the vehicle frame, preventing any equipment from unintentionally snagging on the vehicle.Frame Protection:Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use can quickly make the frame unsightly as the paint wears off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Scope of delivery:- Side covers, left and right (with socket preparation) - Small frame protection, left and right- Mounting materialsColor: black

Soziusfußrastenhalter Fussrastenhalter hinten linkss für BMW R1200GS LC R1250GS + Adventure Angeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1250GS, R1200GS LC Adv. , R1250GS Adventure Hersteller: BMWNeupreis: 175,00 € Zustand: normale Gebrauchsspuren, leichte Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46718526741

Soziusfußrastenhalter Fussrastenhalter hinten rechts für BMW R1200GS LC R1250GS + Adventure Angeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1250GS, R1200GS LC Adv. , R1250GS Adventure Hersteller: BMWNeupreis: 175,00 € Zustand: normale Gebrauchsspuren, leichte Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46718526742

Intuitively applicable and ultra-robust: Get a high-quality smartphone mounting solution for your handlebars with the SP Connect™ Moto Mount Pro. The mount can be installed on standard or oversized handlebars and is flexibly adjustable by 360°. This way, your phone is optimally positioned within your field of vision.You decide whether to use it in landscape or portrait mode. Use your smartphone even during motorcycle rides, for example, for navigation, and keep an eye on the route at all times. Maximum safety and practical usability.        ✔  CNC-machined from aircraft-grade aluminum        ✔  Landscape or portrait mounting        ✔  360° adjustability in 6° increments        ✔  Suitable for standard and oversized handlebarsThe Moto Mount Pro can be mounted on standard and oversized handlebars with diameters of 2.22 / 2.54 / 2.86 / 3.17 cm or 0.875 / 1.0 / 1.125 / 1.25 inches.Note: For smartphones with mechanical image stabilization, we recommend using the Moto Mount Pro in conjunction with the vibration-dampening Anti Vibration Module. This helps prevent potential damage to your camera caused by vibrations from motorcycle engines. If you are unsure or experience issues with your phone, please do not use the product in combination with this smartphone and contact your smartphone manufacturer.