Custom-fit transparent glossy paint protection film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of delivery Paint protection film set detailed instructions for application

PRO Rackpack-SetDiese Kombination aus Hecktasche und Gepäckträger haben wir passend für die BMW R 1200 GS Adv und R 1250 GS Adv mit Rallye-Sitzbank zusammengestellt. Das modellspezifische ADVENTURE-RACK mit Erweiterung bietet die optimale Auflagefläche für die PRO RACKPACK Hecktasche.Das erprobte Rackpack-Set überzeugt mit einfacher Handhabung, viel Platz und modernem Design: Es besteht aus der PRO Rackpack Hecktasche mit bis zu 42 Litern Stauraum und dem passenden Gepäckträger für dein Motorrad mit der dazugehörigen Gepäckbrückenerweiterung. Dank der patentierten Zurrhaken kannst du das PRO Rackpack mit wenigen Handgriffen am Gepäckträger befestigen.Die Hecktasche aus der PRO Serie fertigt SW-MOTECH aus unverwüstlichem 1680 D Ballistic Nylon und den Gepäckträger aus robuster Aluminium-Legierung. Die Befestigung des Trägers erfolgt an den modellspezifischen und belastbaren Anbaupunkten am Motorrad.Lieferumfang1 x ADVENTURE-RACK Gepäckträger1 x Erweiterung für ADVENTURE-RACK Gepäckträger1 x PRO Rackpack HecktascheMontagematerialDetailsFarbe: schwarzGesamtgewicht: ca. 5,0 kgGesamtvolumen: 42,0 lHinweisFür Modell mit Rallye-Sitzbank.

Die Touratech Radnabenabdeckung besteht aus hochwertig eloxiertem Aluminium und die edle Laserbeschriftung setzt Akzente in Sachen Stil.Darüber hinaus bietet sie effektiven Schutz für die Radnabe Ihrer wertvollen GS.

Original BMW Accessories for Installation on the Rear Axle Rear Axle Cover Additional Information

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while also providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   276 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

The rear hugger for the BMW R 1250 GS replaced the orginial part easily. mounting with only 3 bolts on the bevel housing of the bike. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This product is not intended for installation by an end consumer. Installation should only be performed by individuals with the appropriate professional training or by a certified automotive workshop. For this reason, no installation instructions are included with the product. Prices are exclusive of installation costs. Additional Information

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

RockerCover Cover (Left) Carbon - BMW R 1250 GS. R 1250 R. and R 1250 RS from 2019 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

RockerCover Cover Right in Carbon - BMW R 1250 GS. R 1250 R and R 1250 RS from 2019 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Hattech continues the classic and proven path with the new exhaust systems SS12-PS, which defines Hattech as a manufacturer of high-quality and durable stainless steel exhaust systems.Details about the silencer:SS12-PS: An exhaust variant that appeals to every GS rider who desires a deep, bassy sound in every RPM range. completely made of stainless steel all components welded using the TIG process available polished or brushed pleasant, sonorous, bassy sound at the volume level of the original noise reduction insert in the silencer outlet performance and torque-strong silencer no droning during luggage operation EU type approval No registration in the vehicle documents necessary Approximately 600 grams lighter than the original silencer All mounting parts included in the delivery This item is a custom-made product. It is handcrafted in Germany. Therefore, a production time of up to 4 weeks is possible!

Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information

Satz Dichtringe Gabel Gabelsimmerringe für BMW R1200GS LC +Adv., R1250GS + Adventure, R1200RT LC, R1250RTAngeboten wird hier ein NeuteilFahrzeug: R1200GS LC + Adv., R1250GS + Adv., R1200RT LC, R1250RT Hersteller: BMW Zustand: NEU Beschreibung: Wird verkauft wie abgebildet. Besteht aus 2 Staubkappen, 2 Gabelsimmerringen, 2 Sicherungsringen (Sprengringe) und 2 Unterlegscheiben.Neupreis: 51,57 € Teilenummer: 31428532723

Angeboten wird hier ein Neuteil Fahrzeug: K50 R1200GS ab 2017 R1250GS / K51 R1250GS Adventure / K52 R1200RT LC R1250RT Hersteller: BMW Zustand: Neu Beschreibung: wird verkauft wie abgebildet Teilenummer:31428548943

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, and a short break is included. But it's easier said than done. Parking the vehicle on soft ground is a real issue! A small board or a similar base is usually never at hand when needed.Touratech has the solution:With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. Thanks to a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Fits only with original BMW side stands for lowered chassis.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlargement, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlargement a great look and full stability. With a secure attachment of the foot enlargement, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered chassis.Suitable for special model R1200GS "Rallye" with special equipment "Sport chassis".Attention: Regardless of the respective model year, different side stands have been installed, so we recommend additionally checking the shape of your side stand.Please use for: - Wide shape 1021-01-045-5276-0- Narrow shape 01-045-5275-0

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

8-piece tire repair kit for tubeless tires with tire repair sealing strips, tools, and the new Plug Bond from Slime- for motorcycles, quads, ATVs, cars, SUVs, lawnmowers, trailers, agriculture, and many more- tire repair kit with the new, non-toxic, safe, and patented Plug Bond from Slime- for quick and easy repair of flat tires without having to remove the wheel!- suitable only for emergencies and short-term repairs on motorcycles and cars: Have the tire repaired by a professional immediately after use for safety reasons!- contents: reamer, insertion tool with T-handle, 5x vulcanizing sealing strips, Plug Bond- new sealing strips can be purchased separately

During many of our trips to dusty and dry countries, as well as during most sports and rally events, we faced the issue of fine dust repeatedly entering the intake tract through the air filters. This sometimes had significant consequences for the engine. Over the past few years, we have tried and tested many air filters. We found the solution to our dust problem in Australia. Unifilter Australia provided us with air filters for testing that met our expectations 100%. The Touratech Research & Development Team has used the Unifilter in all racing events and has since found no dust residue in the air filter box or engine. Another advantage of the filters made from "High-Tech Foam" is their long lifespan. The filter is not discarded when it gets dirty; instead, it is washed and re-oiled, allowing it to be reused repeatedly.Made in AustraliaThis way, you not only protect your engine but also your wallet. Scope of delivery:2x Snorkel FiltersImportant Tip:- In street use, the air filter should be checked and cleaned if necessary between the actual maintenance intervals due to its design (foam).- In off-road sports, the air filter is usually checked after each race and therefore automatically falls within the regular maintenance intervals.

Soziusfußrastenhalter Fussrastenhalter hinten linkss für BMW R1200GS LC R1250GS + Adventure Angeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1250GS, R1200GS LC Adv. , R1250GS Adventure Hersteller: BMWNeupreis: 175,00 € Zustand: normale Gebrauchsspuren, leichte Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46718526741