The Side fairing right side in gloss surface for the Ducati Multistrada Enduro from 2016 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting.The part can also be orderd in matte surface. matching perfectly with the original Ducati Perfomance carbonparts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and gives a unique UV resistance.  

The sidepanel above the radiator in carbon for the Triumph Speed Triple is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The sidepanel above the radiator in carbon for the Triumph Speed Triple is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The left side panel under the seat in carbon for the Ducati Monster models is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The right side panel under the seat in carbon for the Ducati Monster Family is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side panel under the tank left (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. Due to the strong carbon fibres the Ilmberger part even enforces the original fairing in that area.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The side panel under the tank left (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish. the part matches the original matt carbon parts. offered by Ducati Performance. perfectly. Due to the strong carbon fibres the Ilmberger part even enforces the original fairing in that area.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The side panel under the tank right (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossyx surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. Due to the strong carbon fibres the Ilmberger part even strengthens the original fairing in that area.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done.Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when it is needed.Touratech has the solution:The side stand foot enlarger increases the contact area by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.For your KTM 1290 Super Adventure R (2021-) please order 01-373-5275-0.

The Sidepanel left side gloss in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.     The facts:   - With general operating permit (ABE) - - the continuously adjustable chain tensioner remains usable - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The Sidepanel left side in matte in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.     The facts:   - With general operating permit (ABE) -  the continuously adjustable chain tensioner remains usable - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The Sidepanel right side gloss in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.     The facts:   - With general operating permit (ABE) - - the continuously adjustable chain tensioner remains usable - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The Sidepanel right side in matte in carbonfiber for the Aprilia Tuono V4 / RSV4 2021 is a direct replacement for the original component. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.     The facts:   - With general operating permit (ABE) - - the continuously adjustable chain tensioner remains usable - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The seat cover is designed in one piece and can be combined with the original seat. The high-gloss surface pronounced the sporty character of the Panigale V4 / V4 S Racing. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The single seat (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish. the part matches the original matt carbon parts. offered by Ducati Performance. perfectly. The part gives the  V4s rear  the ultimate race look.   This part is a direct replacement for the original components and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The seat cover is designed in one piece and can be combined with the original seat. The matt finish of the surface fits perfectly with the original carbon parts of the Panigale V4 / V4 S Racing. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung

Eine Hepco&Becker Sissybar mit Gepäckbrücke bietet die Möglichkeit problemlos kleines Gepäck mitzunehmen. Durch eine optionale Gepäckbrückenverbreiterung aus Aluminium (Artikelnummer 800000) ist eine sichere Befestigung unserer Handbags oder anderer breiter Gepäckstücke gewährleistet.nicht topcasetauglich!hochwertiges OberflächenfinishEmpfohlene Zuladung: 5kg (bitte beachten Sie die hinterlegte Anbauanleitung, sowie fahrzeugspezifische Hinweise oder die Motorradherstellerangaben)meist ohne Probleme mit den entsprechenden C-Bow Haltern, Ledertaschenhaltern oder Kofferträgern kombinierbar (beachten Sie die fahrzeugspezifischen Angaben, sowie die Montageanleitung für Einschränkungen)inkl. Montagematerial und MontageanleitungGepäcksysteme benötigen generell keine ABE oder Eintragung