The License plate holder incl.Belt Guard gloss for the Ducati XDiavel 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Our carbonpart weighs only 150g! Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. No ABE and TÜV.

The License plate holder incl.Belt Guard matt for the Ducati XDiavel 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Our carbonpart weighs only about 150g! Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. No ABE and TÜV.

The Touratech Suspension PRO shock absorber for the Yamaha Ténéré 700 World Raid focuses on top performance under extreme conditions. The innovative design of the damper piston allows for optimized oil flow behavior. Even at the highest damping frequencies, such as those encountered during fast off-road riding, the formation of oil foam is prevented. This ensures that the damping behavior of the Touratech Suspension PRO shock absorber remains completely consistent across a vast load spectrum. Additionally, the new low friction seal on the massive 16 mm piston rod has extremely low friction values, resulting in an exceptionally low breakaway torque and sensitive response. Annoying stiction, also known as the slip-stick effect, is foreign to the PRO dampers. These features guarantee the best traction, stability, and comfort under all conditions.   Easy situational adjustment of setup and balance For easy and quick adjustment of the motorcycle balance to the respective load condition – solo rides or two-up touring with a lot of luggage – the particularly robust “PRO Preload Adjuster” ensures this. The preload of the spring can be easily adjusted over a large adjustment range with relatively low operating pressure using the large, grippy handwheel. Damping In line with the easy spring preload adjustment, this high-end shock absorber features the finest rebound adjustment ever realized in a motorcycle shock absorber. The precise tuning ensures optimal tire contact with the ground without unpleasant bottoming out or sinking of the rear. This guarantees maximum riding dynamics and the highest safety. The compression damping can be adjusted over a wide range. Even less experienced users can achieve individual, reproducible setups considering high- and low-speed damping without tools.   Robust Touratech setup for high demands Thanks to the special Touratech setup, the PRO spring elements for the Yamaha Ténéré 700 World Raid are ready for off-road use even with high loads right out of the box.   Serviceable Long Live components Like all spring elements from Touratech Suspension, the PRO shock absorbers are, of course, fully serviceable. From time to time or after intense loads on long trips, the dampers can be disassembled and overhauled. After that, they are as good as new. For consistent performance and long riding enjoyment.   The Facts Robust, slim, lightweight precision design with low unsprung masses and maximum strength. One-piece machined bottom part for maximum stiffness and low weight Innovative Hyper Flow damper piston for optimal oil flow regardless of operating temperature Low friction seal for exceptionally low breakaway torque and sensitive response Robust “PRO Preload Adjuster” with a large adjustment range, grippy handwheel, and low operating pressure Newly developed PRO rebound adjustment with precise and effective click adjustment. Easy adjustment of compression damping in the high- and low-speed range using an adjustment wheel. Exact reproducibility thanks to cleanly engaging “clicks” and numerical scale. High-quality uniball bearings with minimal tolerances for maximum wear resistance Robust Touratech setup for a wide range of applications End stop with progressively acting buffer Fully serviceable   Scope of delivery: - Ready-to-install shock absorber type Extreme - ABE documents - Installation instructions / user manual   Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

The Touratech Suspension PRO shock absorber for the Yamaha Ténéré 700 World Raid focuses on top performance under extreme conditions. The innovative design of the damper piston allows for optimized oil flow behavior. Even at the highest damping frequencies, such as those encountered during fast off-road riding, the formation of oil foam is prevented. This ensures that the damping behavior of the Touratech Suspension PRO shock absorber remains completely consistent across a vast load spectrum. Additionally, the new low friction seal on the massive 16 mm piston rod has extremely low friction values, resulting in an exceptionally low breakaway torque and sensitive response. Annoying stiction, also known as the slip-stick effect, is foreign to the PRO dampers. These features guarantee the best traction, stability, and comfort under all conditions.   Easy situational adjustment of setup and balance For easy and quick adjustment of the motorcycle balance to the respective load condition – solo rides or two-up touring with a lot of luggage – the particularly robust “PRO Preload Adjuster” ensures this. The preload of the spring can be easily adjusted over a large adjustment range with relatively low operating pressure using the large, grippy handwheel. Damping In line with the easy spring preload adjustment, this high-end shock absorber features the finest rebound adjustment ever realized in a motorcycle shock absorber. The precise tuning ensures optimal tire contact with the ground without unpleasant bottoming out or sinking of the rear. This guarantees maximum riding dynamics and the highest safety. The compression damping can be adjusted over a wide range. Even less experienced users can achieve individual, reproducible setups considering high- and low-speed damping without tools.   Robust Touratech setup for high demands Thanks to the special Touratech setup, the PRO spring elements for the Yamaha Ténéré 700 World Raid are ready for off-road use even with high loads right out of the box.   Serviceable Long Live components Like all spring elements from Touratech Suspension, the PRO shock absorbers are, of course, fully serviceable. From time to time or after intense loads on long trips, the dampers can be disassembled and overhauled. After that, they are as good as new. For consistent performance and long riding enjoyment.   The Facts Robust, slim, lightweight precision design with low unsprung masses and maximum strength. One-piece machined bottom part for maximum stiffness and low weight Innovative Hyper Flow damper piston for optimal oil flow regardless of operating temperature Low friction seal for exceptionally low breakaway torque and sensitive response Robust “PRO Preload Adjuster” with a large adjustment range, grippy handwheel, and low operating pressure Newly developed PRO rebound adjustment with precise and effective click adjustment. Easy adjustment of compression damping in the high- and low-speed range using an adjustment wheel. Exact reproducibility thanks to cleanly engaging “clicks” and numerical scale. High-quality uniball bearings with minimal tolerances for maximum wear resistance Robust Touratech setup for a wide range of applications End stop with progressively acting buffer Fully serviceable   Scope of delivery: - Ready-to-install shock absorber type Extreme - ABE documents - Installation instructions / user manual   Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving characterizes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with shot-blasted surface and laser engraving- Includes ABE

The lower belt cover in carbon for the Buell 1125 R/CR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The lower chainguard in gloss surface for the Ducati Multistrada Enduro from 2016 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting.The part can also be orderd in matte surface. matching perfectly with the original Ducati Perfomance carbonparts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and gives a unique UV resistance.

The lower chainguard in carbon for the Ducati MTS 1200 Enduro from MY 2015 is delivered with matt surface and matching perfectly with the original Ducati Perfomance carbonparts.The part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 50% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our lower Exhaust end cap for the Ducati Supersport 939 in matt finish blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The lower exhaust heat protection made of carbon sets subtle but striking accents on the Ducati Multistrad V4 and makes it look even more elegant and sporty!  In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The lower tank cover (left side) in our unique design for the Honda CBR 1000 RR Fireblade 2017 blends into the motorcycle's overall appearance. Placed directly on the crossover section of tank and frame. the Ilmberger Carbon part is mounted on original mounting- or screwpoints. This part contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Lower Tank cover left side in carbon for the Suzuki GSX R 1000 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The lower tank cover (right side) in our unique design for the Honda CBR 1000 RR Fireblade 2017 blends into the motorcycle's overall appearance. Placed directly on the crossover section of tank and frame. the Ilmberger Carbon part is mounted on original mounting- or screwpoints. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Lower Tank cover right side in carbon for the Suzuki GSX R 1000 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -25mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the Honda CRF1100L Adventure Sports. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “Honda CRF1100L Adventure Sports with EERA (2020-)”   Info: The side stand and main stand may need to be adjusted in length.   Scope of delivery: - Fork springs -25mm for the original fork. - Replacement spring for original shock absorber -25mm. - Including detailed installation instructions. - Suitable fork oil. - Paste to improve the glide of the fork tubes.   Installation Info: - Right fork leg requires tool HP-T85 (01-403-5859-0) - Left fork leg requires tool HP-T01 (01-403-5860-0) Please observe installation information   Our recommendation: Have the conversion performed by a specialist workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

Luftauslasskanal in Carbon für Ducati XDiavel Perfekte Ergänzung für Ihre Ducati XDiavel ab 2016 Material: Hochwertiges Carbon in matter Ausführung Gewicht: Nur 20g Montage: Einfache Befestigung an vorhandenen Haltepunkten Herstellung: Gefertigt aus Prepreg-Material im Autoklaven Schutz: Überzogen mit klarer Kunststoffbeschichtung für maximale Beständigkeit Warum dieses Carbonteil? Leichtgewicht: Verbessert die Performance ohne zusätzliches Gewicht Robustheit: Übertrifft herkömmlichen Klarlack in Kratzfestigkeit und Schutzwirkung Ästhetik: Betont die dreidimensionale Wirkung der Carbonstruktur Verleihen Sie Ihrer Ducati XDiavel einen Hauch von Exklusivität und technischer Raffinesse mit unserem Carbon-Luftauslasskanal. Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Honda CBR 1000 RR Fireblade 2017 Carbon Luftauslassverkleidung Optimale Integration und Design Einzigartiges Design für die linke Luftauslassverkleidung Perfekte Ergänzung zum glänzend lackierten Verkleidungsseitenteil Ersetzt matte Plastikverkleidung für hochwertigere Optik Leistungsstarke Materialien Hochfeste Carbonfasern für erhöhte Stabilität Gewichtsersparnis von ca. 70% gegenüber dem Originalteil Gefertigt aus Prepreg-Material im Autoklaven Schutz und Langlebigkeit Kunststoffbeschichtung für überlegenen Schutz und Kratzfestigkeit Verbesserte dreidimensionale Wirkung der Carbonstruktur Montage Verwendung der originalen Befestigungspunkte Kann ohne zusätzliche Rahmenabdeckung montiert werden Verleihen Sie Ihrer Fireblade die perfekte Optik und technische Finesse mit unserer Carbon Luftauslassverkleidung! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 3P6-2838N-00 Fahrzeug: 2011FJR1300A (FJR1300A)FJR1300AS (FJR1300AS)2010FJR1300AS (FJR1300AS)FJR1300A (FJR1300A)2009FJR1300AS (FJR1300AS)FJR1300A (FJR1300A)2008FJR1300AS (FJR1300AS)FJR1300A (FJR1300A)2007FJR1300AS (FJR1300AS)FJR1300A (FJR1300A)2006FJR1300A (FJR1300A)FJR1300AS (FJR1300AS)

Lufteinlasskanal aus Carbon für Ducati XDiavel Perfekte Passform und Leichtigkeit Glänzende Carbon-Ausführung Passend für Ducati XDiavel ab 2016 Gewicht: ca. 85g Hochwertige Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven Montage an originalen Haltepunkten Überlegene Schutzbeschichtung Klarer Kunststoffüberzug für maximalen Schutz Erhöhte Kratzfestigkeit und Beständigkeit Verstärkt die dreidimensionale Carbonstruktur Erleben Sie die perfekte Symbiose aus Technik und Design für Ihre Ducati XDiavel! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Carbon Lufteinlasskanal für Ducati XDiavel (ab 2016) Leichte und robuste Konstruktion Gewicht: Nur 85g Material: Hochwertiges Prepreg-Carbon Einfache Montage Montage an originalen Haltepunkten Hochwertige Schutzbeschichtung Übertrifft herkömmlichen Klarlack in Schutzwirkung und Kratzfestigkeit Verstärkt die dreidimensionale Wirkung der Carbonstruktur Optimieren Sie Ihre Ducati XDiavel mit diesem stilvollen und funktionalen Carbon-Upgrade! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 1L9-14451-00 Fahrzeug: 1979XS250XS400

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 1WS-14450-00 Fahrzeug: 1999R7 (YZF-R7)

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 3LD-14450-00 Fahrzeug: 1995SUPERTENERE (XTZ750)1994SUPERTENERE (XTZ750)1993SUPERTENERE (XTZ750)1992SUPERTENERE (XTZ750)1991SUPERTENERE (XTZ750)1990SUPERTENERE (XTZ750)XTZ750SUPERTENERE (XTZ750A)1989SUPERTENERE (XTZ750)

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 3TB-14451-02 Fahrzeug: 1995XT600EXT500E1994XT600XT500EXT600E1993XT600EXT600XT500E1992XT400E