YAMAHA

Where one ideally parks an adventure bike, paved parking spaces are a rarity. However, parking the bike off-road only brings joy if the conditions are right.A side stand foot enlarger meets this requirement and saves you from the exhausting task of lifting the fully loaded bike.

The Touratech luggage rack made of stainless steel for the T7 is a sturdy luggage rack for the Touratech ZEGA Evo, ZEGA Pro, ZEGA Pro2, and ZEGA Mundo cases. The perfect luggage system for long journeys.It not only visually matches the frame of the Tenere but is also a rust-free system made from 18 mm stainless steel tubing, ensuring particularly high stability even off the beaten path.Installation is done at existing mounting points.- made of 18mm stainless steel tubing- also suitable for tough off-road use- no restriction for the passengerCan be perfectly combined with the ZEGA top case carrier / luggage bridge 01-632-5455-0. (not included)

The Touratech EVO X luggage rack made of stainless steel for the Yamaha Tenere 700 is a sturdy luggage rack for the Touratech ZEGA EVO X cases. The perfect luggage system for long journeys.It not only visually matches the frame of the T7 but is also a rustproof system made from 18 mm stainless steel tubing, ensuring particularly high stability even off the beaten path.Typical for the EVO X special system is the cutout on the right case, allowing it to smoothly hug the exhaust. The cases are positioned closer to the vehicle's center, reducing the overall width and giving the system a more harmonious appearance due to the symmetrical case lids.Practical benefits and user-friendliness:The ZEGA Evo offers even easier hanging with absolutely stable hold - even in tough off-road conditions! It combines optimal ergonomics and absolute comfort without compromising reliability. The case as part of the luggage system:The ZEGA Evo X was developed, like all cases from Touratech, not as an isolated product but is designed from the outset as part of a luggage system. The outstanding practical benefits result from the unique combination of a beautifully designed yet indestructible case, a brilliant mounting mechanism, and a rugged carrier made from 18 mm thick stainless steel pipes.Stainless steel luggage rack special system for ZEGA Evo X - made from 18x2 mm stainless steel tubing- also suitable for tough off-road use- no restriction for the passenger- fits elegantly into the overall look of the Yamaha Ténéré 700 - easy assembly / disassemblyInstallation is done at existing mounting points. With just a few screws, the very robust construction is securely mounted or disassembled for off-road use. The mounting brackets remain unobtrusively on the motorcycle.Delivery includes:1 x luggage rack with mounting materialsYou will need 1x ZEGA Evo case and 1x ZEGA Evo X case.

Mit dem Competition-Federbein liefert Touratech Suspension dem ambitionierten Sportfahrer das Material für schnelle Rundenzeiten. Das Competition-Federbein ist die Basis für optimale und ausgewogene Rennperformance ihres Motorrades. Wir bringen das Fahrwerk ihres Superbikes auf ein siegfähiges Niveau. Unser Fahrwerksteam hat ein sehr gutes Grundsetup für die Yamaha YZF-R1 herausgefahren. Das Competition Federbein lässt sich, ausgehend von dieser Basis, völlig personalisiert auf sie abstimmen. Somit ist gewährleistet dass sie das Hinterrad bestmöglich auf die Performance der Gabel abstimmen können. Die optimale Balance und das gute Gefühl zum Fahrwerk wird ihr Schlüssel zur perfekten Race-Performance.Die neue Race-Performance für ihre Yamaha YZF-R1.Facts & Figures Federbein:=> Das Federbeingehäuse ist aus Aluminium gefertigt. Dadurch geringstmögliches Gewicht. => Reibungsarme Spezial-Dichtungen mit integriertem Teflon-Stützring für hohe Performance.=> Ausgleichsbehälter am Federbein für bestmögliche Kühlung der Dämpferflüssigkeiten.=> Trennkolben im Ausgleichsbehälter für feinstes Ansprechen des Federbeins.=> High- und Low Speed-Dämpfung ermöglichen präzise und feinste Dämpfungsperformance=> Große 16 mm Kolbenstange aus Chrom-Molybdän-Stahl für maximale Stabilität und Haltbarkeit=> 46mm Dämpferkolben mit speziellem Touratech-Competition-Setup.=> Stabile Edelstahlbuchsen Im Federbeinauge sind für präzise Befestigung. Dadurch stabiler, spielfreier Sitz der Befestigungsschraube auch bei höchsten Belastungen.=> Alle Bauteile und Komponenten sind auf intensiven Einsatz im Racing-Betrieb ausgelegt. => QR-Barcode auf dem Federbein mit den individuellen Federbein-Informationen. Dadurch einfaches Abrufen der federbeinspezifischen Infos durch Abscannen mit dem Smartphone. Immer Infos zur Grundeinstellung des Federbeins abrufbar. Reset bei falscher Einstellung möglich.=> Voll servicefähig. Dadurch dauerhaft höchste Fahrdynamik.Lieferumfang: - Einbaufertiges Federbein.- Montageanleitung / Benutzer-HandbuchPassende Touratech Suspension Gabelfedern auf AnfrageSie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns

Lowering replacement springs by -35mm for Yamaha XT 1200 Z Super Tenere (Not ZE/ES) 2010 - 2019 The Touratech Suspension lowering kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. E-mail: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

The Touratech Suspension PRO shock absorber for the Yamaha Ténéré 700 focuses on top performance under extreme conditions. The innovative design of the damper piston allows for optimized oil flow behavior. Even at the highest damping frequencies, such as those encountered during fast off-road rides, the formation of oil foam is prevented. This ensures that the damping behavior of the Touratech Suspension PRO shock absorber remains completely consistent across a vast load spectrum. Additionally, the new low friction seal on the massive 16-mm piston rod has extremely low friction values, resulting in an exceptionally low breakaway torque and sensitive response. Annoying stick-slip, also known as the slip-stick effect, is foreign to the PRO dampers. These features guarantee the best traction, stability, and comfort under all conditions.   Easy situational adjustment of setup and balance The particularly robust “PRO Preload Adjuster” allows for easy and quick adjustment of the motorcycle's balance to the respective load condition – whether solo rides or two-up touring with a lot of luggage – thanks to a wide adjustment range and relatively low operating pressure, which can be easily set using the large, grippy handwheel. Damping In line with the easy spring preload adjustment, this high-end shock absorber features the finest rebound adjustment ever realized in a motorcycle shock absorber. The precise tuning ensures optimal tire contact with the ground without unpleasant bottoming out or sinking of the rear. This guarantees maximum riding dynamics and the highest safety. The compression damping can be adjusted over a wide range. Even less experienced users can achieve individual, reproducible setups considering high- and low-speed damping without tools.   Robust Touratech setup for high demands Thanks to the special Touratech setup, the PRO spring elements for the Yamaha Ténéré 700 are ready to install "out of the box" for off-road use, even with high loads.   Serviceable Long Live components Like all spring elements from Touratech Suspension, the PRO shock absorbers are fully serviceable. From time to time or after intense loads on long trips, the dampers can be disassembled and overhauled. After that, they are as good as new. For consistent performance and long riding enjoyment.   The Facts Robust, slim, lightweight precision design with low unsprung mass and maximum strength. One-piece machined bottom part for maximum stiffness and low weight. Innovative Hyper Flow damper piston for optimal oil flow regardless of operating temperature. Low friction seal for exceptionally low breakaway torque and sensitive response. Robust “PRO Preload Adjuster” with a large adjustment range, grippy handwheel, and low operating pressure. Newly developed PRO rebound adjustment with precise and effective click adjustment. Easy adjustment of compression damping in the high- and low-speed range using an adjustment wheel. Exact reproducibility thanks to cleanly engaging “clicks” and numerical scale. High-quality uniball bearings with minimal tolerances for maximum wear resistance. Robust Touratech setup for a wide range of applications. End stop with progressively acting buffer. Fully serviceable.   Scope of delivery: - Ready-to-install shock absorber type Extreme - ABE documents - Installation instructions / user manual   Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

The Touratech Suspension PRO shock absorber for the Yamaha Ténéré 700 focuses on top performance under extreme conditions. The innovative design of the damper piston allows for optimized oil flow behavior. Even at the highest damping frequencies, such as those encountered during fast off-road rides, the formation of oil foam is prevented. This ensures that the damping behavior of the Touratech Suspension PRO shock absorber remains completely consistent across a vast load spectrum. Additionally, the new low friction seal on the massive 16-mm piston rod has extremely low friction values, resulting in an exceptionally low breakaway torque and sensitive response. Annoying stick-slip, also known as the slip-stick effect, is foreign to the PRO dampers. These features guarantee the best traction, stability, and comfort under all conditions.   Easy situational adjustment of setup and balance The particularly robust “PRO Preload Adjuster” allows for easy and quick adjustment of the motorcycle's balance to the respective load condition – whether solo rides or two-up touring with a lot of luggage – thanks to a wide adjustment range and relatively low operating pressure, which can be easily set using the large, grippy handwheel. Damping In line with the easy spring preload adjustment, this high-end shock absorber features the finest rebound adjustment ever realized in a motorcycle shock absorber. The precise tuning ensures optimal tire contact with the ground without unpleasant bottoming out or sinking of the rear. This guarantees maximum riding dynamics and the highest safety. The compression damping can be adjusted over a wide range. Even less experienced users can achieve individual, reproducible setups considering high- and low-speed damping without tools.   Robust Touratech setup for high demands Thanks to the special Touratech setup, the PRO spring elements for the Yamaha Ténéré 700 are ready to install "out of the box" for off-road use, even with high loads.   Serviceable Long Live components Like all spring elements from Touratech Suspension, the PRO shock absorbers are fully serviceable. From time to time or after intense loads on long trips, the dampers can be disassembled and overhauled. After that, they are as good as new. For consistent performance and long riding enjoyment.   The Facts Robust, slim, lightweight precision design with low unsprung mass and maximum strength. One-piece machined bottom part for maximum stiffness and low weight. Innovative Hyper Flow damper piston for optimal oil flow regardless of operating temperature. Low friction seal for exceptionally low breakaway torque and sensitive response. Robust “PRO Preload Adjuster” with a large adjustment range, grippy handwheel, and low operating pressure. Newly developed PRO rebound adjustment with precise and effective click adjustment. Easy adjustment of compression damping in the high- and low-speed range using an adjustment wheel. Exact reproducibility thanks to cleanly engaging “clicks” and numerical scale. High-quality uniball bearings with minimal tolerances for maximum wear resistance. Robust Touratech setup for a wide range of applications. End stop with progressively acting buffer. Fully serviceable.   Scope of delivery: - Ready-to-install shock absorber type Extreme - ABE documents - Installation instructions / user manual   Do you have further questions? We are happy to advise you personally. Contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.

Der Touratech Suspension *RSC* Lenkungsdämpfer optimiert wirkungsvoll die Fahrstabilität der Yamaha Ténéré 700 World Raid. Ob im Pisten- und Tourenbetrieb mit hoher Beladung oder bei der Kurvenhatz. Wir erfahren und erleben, dass der progressive Touratech Suspension *RSC* (Reactive Safety Control) Lenkungsdämpfer mit seiner permanent unterstützenden Wirkung völlig neue Fahrdimensionen eröffnet. Je nach „individueller Anforderung“ kann die Dämpfung über 24 Klicks sehr fein an die Fahrzustände angepasst werden. Spürbare Verbesserung der Fahrdynamik, bei hoher Zuladung im Reisetrimm, bei Langstrecken, auf schlechtesten Straßen und/oder auf Pisten. Das Motorrad kann mit dem *RSC* Lenkungsdämpfer wesentlich fahrstabiler, ermüdungsfreier und sicherer bewegt werden.   Folgende Einflüsse werden stark minimiert: - Kein starkes Einlenken mehr bei langsam gefahrenen Kurven mit hoher Zuladung. - Minimierung der vom Fahrer übertragenen Unruhen in den Lenker. - Beispiel: Windanströmung der Motorradkleidung und Unruhe durch einen vorausfahrenden LKW oder Van. - Minimierung der Störungen durch Spurrinnen auf Autobahnen Landstraßen und auch Pisten. - Kleines Vorderrad mit Stollenreifen bei Pisten- oder Sandfahrten wird spürbar stabilisiert. - Weniger Ermüdung auf langen Strecken durch permanent höhere Fahrstabilität.   Eingenschaften: - Touratech Suspension *RSC* Lenkungsdämpfer für Yamaha Ténéré 700 World Raid - Komplett mit dem passenden Anbausatz für das Motorrad geliefert. - Aus hochwertigen Flugzeugaluminium 7075 CNC gefräst. - Zeichnet sich durch sensibles Ansprechverhalten aus - Maximale Sicherheit. Ist somit für "Offroad & Road" perfekt einsetzbar. - Edles Touratech Design - Justierbare 24-Klicks Dämpfung - 75mm Hub   Lieferumfang: - Touratech Suspension *RSC* Lenkungsdämpfer - Passender Anbausatz für die Yamaha Ténéré 700 World Raid. - Montageanleitung

Lowering Replacement Springs by -20mm for Yamaha NIKEN (GT) 2019 - 2020 The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Fork springs for the original fork. - Replacement spring for the original shock absorber. - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the fork tubes. Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This Cartridge Kit Extreme is perfect for reducing the seat height (-25mm) for the Yamaha Ténéré 700 World Raid. The Cartridge KIT is simply put a shock absorber for the fork and represents the absolute premium class in terms of suspension technology. The Closed Cartridge is installed in the original fork. This way, the fork bridge/handlebar mount, brakes, wheel guidance, and steering geometry remain fully intact. No additional modifications to the fork are required. This Close Cartridge is designed for touring and riding operations with frequently and heavily changing loads and riding conditions or extreme demands.   Important points at a glance: - Cartridge Kit Extreme -25mm is configured based on our experiences for the Yamaha Ténéré 700 World Raid and is pre-set for -25mm. - With this suspension solution, the rear and front areas of the motorcycle must be adjusted together.   The basic setup is tailored for the demanding adventure rider with luggage. Adjustments for exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of the appropriate spring rate and further configurations.   Scope of delivery: - 2x Closed Cartridge -25mm - with damping adjustment, (1x) rebound stage, (1x) compression stage. - with spring preload adjustment (using a 22mm wrench) - Adjustment tool for damping - Installation tool for closure cap. - Ready for installation and filled with pre-assembled fork spring. - 1 liter of oil (for fork installation) - User manual and installation instructions - 2x fork protection stickers.   Important note: With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your Yamaha Ténéré 700 World Raid, the side stand and/or main stand must be adjusted.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.  

This shock absorber is perfect for reducing the seat height (-25mm) for the Yamaha Ténéré 700 World Raid. At the same time, your Yamaha Ténéré 700 World Raid remains well-tuned and very suitable for touring. This shock absorber is designed for touring and riding with frequently and heavily changing loads and riding conditions or extreme requirements. The Extreme shock absorber features PDS, a hydraulic bottoming protection achieved by using a second damping piston. Even under the most extreme trail conditions with full luggage, there is no bottoming out, preventing mechanical overload of the shock absorber. The damping is dependent on the travel. In the majority of riding situations, the shock absorber is comfortably and power-saving adjusted, before the PDS engages in the last part of the shock travel.   Important points at a glance: - The shock absorber is configured and ready to ride based on our experiences for the Yamaha Ténéré 700 World Raid. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - The shock absorber mentioned here is designed for a rider weight of up to 100kg including luggage. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps.   This will severely impair the motorcycle's handling.   Note: For the safe stand of your Yamaha Ténéré 700 World Raid after lowering, we recommend shortening the side stand.   The basic setup installed here is tuned for riders up to 100 kg plus luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs.   Please use our suspension check form and send us the completed document.   Scope of delivery: - Ready-to-install shock absorber -25mm. - ABE documents - Installation instructions / user manual   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555

The Touratech Suspension World Travel Edition Level2 Set is the right choice for long-distance and touring operations for the Yamaha Tenere 700. More performance and comfort for your Yamaha Tenere 700 with the Touratech Suspension Shock Absorber Type Level2. Whether you are heading out for a twisty ride or a leisurely tour with friends, the large adjustment range allows for a more precise tuning of balance and damping than is possible with the stock components. The Level 2 shock absorber in emulsion design can be adjusted for load adaptation to the large travel luggage via handwheel and hydraulic preload adjustment. The progressive fork springs are perfectly tailored to the requirements of the fork for the Yamaha Tenere 700, providing better tuning for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range.Key points at a glance:=> The suspension set is configured and ready to ride based on our experiences for the Yamaha Tenere 700.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> In this SET, the rear and front areas of the motorcycle are adjusted and in perfect balance.A suspension set that allows you to easily and comfortably respond to different load conditions of your motorcycle. The base setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.Scope of delivery:- Ready-to-install shock absorber Type Level2 (01-632-5860-0)- Replacement spring for the original fork. (01-632-5880-0)- Suitable fork oil.- ABE documents- Installation instructions / user manual ONLINEDo you have further questions? We are happy to advise you personally, please contact us.

Unmatched practicality, incredibly versatile, and indescribably durable! The tank bag offers the ideal storage space for all quickly needed items such as drinks, camera, tools, or a snack, right within the driver's reach.Thanks to its volume expansion via a full-length zipper, it is also prepared for surprising loads on the go and withstands almost any strain due to the use of extremely durable Cordura material.The precise mounting and vehicle-specific mounting kit ensure secure hold even under heavy loads. The utility is further enhanced by two outer pockets, a large map pocket, and two backpack straps.- Vehicle-specific, precisely fitting base plate for play-free and stable hold on the vehicle- Inserts made of robust and waterproof tarpaulin- We use certified Cordura fabric instead of simple nylon, as found in motorcycle protective clothing and expedition gear- Sturdy base body and lid made of high-quality, water-repellent, and abrasion-resistant 1100 dtex Cordura- Outer pockets and inserts made from 560 dtex Cordura- Fabric inner side waterproof coated- Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading- Washable and easy to clean- The fabric used is successfully tested for harmful substances according to Oeko-Tex Standard 100- Reflective inserts from 3M Scotchlite ensure best visibility- Sturdy carrying handle for practical transport off the motorcycle- Easily expandable via full-length zipper- Built for extreme loads and long durability- Best fit- Inner pocket in the lid for documents and additional maps- Organizer with mini pocket for toll cards, credit cards, and loops for pens or small flashlight on the inner side of the lid- Easy-to-use front fastening with click closures- Stable, play-free fastening at the back with large-area Velcro- Secure attachment yet quick to remove from the vehicle- Removable in seconds for refueling- Map pocket with Velcro attachment and large opening included- Carrying straps for use as a shoulder bag or backpack are included- Low weight with high payload and large usable volume- Water-protected, high-quality zippers- Elastic, reflective rubber bands with quick-release for fast attachment of gloves or rain jacket- Waterproof inner pockets available optionally- Rain cover available optionally- Due to the special cut of the side pockets, no additional "horn protection bracket" is needed- Practical, spacious side pockets with generous expansion folds- Large main compartment without disturbing dividers for maximum space and individual loading- Water-repellent cable passage for charging cables or other power supply inside- Clear view of the instruments or mounted navigation devices- Interesting, exclusive material mix with refreshing design- All luggage systems are handcrafted with great care- No annoying improvisation with "universal mounting kits" and poor fit; the luggage systems are vehicle-specific developed, and the installation and durability are tested by us- The measurement of the volume is practical and honest with the bag mounted on the vehicle and not, as often usual, by estimation or approximate calculationAttention: Please use a paint protection film if necessary! (Item number 01-101-0100-0)Dimensions: (L x W x H) approx. 30 x 30 x 16/28 cm; Volume: approx. 12 / 18 liters Color: black

With the Touring MIDI tank bag, we have created the perfect luggage solution for the compact tanks of most adventure touring bikes. Whether it's a Yamaha Tenere 700, KTM 890 Adv, Honda Africa Twin, or Triumph Tiger 900 – even the BMW F 800 GS fits the MIDI like a tailored suit!The "small" tank bag from the Touring series offers approximately 7 liters of luggage volume, which can be expanded to 13 liters via the all-around zipper. It sits excellently on the tank. The unrestricted freedom of movement makes the Touring MIDI a reliable companion even on more challenging off-road stages.The two outer pockets provide additional storage space. The tank bag easily withstands a downpour – for monsoon-like rain, the optional rain cover is recommended. Touratech's typical features, such as the prepared cable entry, the credit card pocket for toll stations, and pen holders in the lid, are, of course, included.The special anti-slip material on the underside and the individually adjustable straps keep the tank bag securely in place. The brilliantly simple strap securing system and the clip closures allow for easy refueling.The Molle straps are not just for decoration. Here, additional luggage can be secured, or the optionally available map case can be attached. Or use the reflective elastic cord to secure easily accessible luggage or wet clothing. This way, you can customize your Touring MIDI to your liking.Specifically designed for the demands of touring, the Touring tank bag impresses with an enormous range of functions and practical details.• Anti-slip base plate for a secure and stable hold on the vehicle• High-quality Cordura®• Washable and easy to clean• Reflective inserts, ergonomic, sturdy carrying handle• Easily expandable via all-around zipper• Molle system for additional luggage on the lid• Organizer with mini pocket for toll cards, credit cards, and loops for pens or small flashlights on the inside of the lid• Attachment with easy-to-use click closures and strap securing system• Optional carrying strap for use as a shoulder bag• Water-protected, high-quality zippers• Elastic, reflective rubber cords with quick-release for easy attachment of gloves or rain jackets• Rain cover available as an option• Practical, spacious side pockets• Large main compartment without dividers for maximum space and individual loading• Water-repellent cable entry for power supply to the interior• Includes storage bag/multifunctional pouch (055-0555)Please use a paint protection film if necessary!Dimensions: (L x W x H) approx. 30 x 15 x 19/26 cmVolume: approx. 7/10 litersThe completely newly developed soft luggage series Touring meets the desire of many touring riders for a straightforward and functional soft luggage setup. The excellent workmanship and high-quality Cordura® make the products of the Touring series long-term travel companions. The material has a premium feel and is treated to be water-repellent, so a few raindrops won't harm the contents. During the day, almost invisible in the modern design, the bright reflective applications provide a significant increase in safety in the dark.Robust and durable zippers complete the high-quality features of the new Touring series.

These installation locks are specifically designed for ZEGA Evo and can be mounted without drilling or filing!If you require a specific key number, please enter it during the ordering process.Set includes locks for both cases!Contents:- 1x lock for left case attachment- 1x lock for right case attachment- 4x locks for case closure

These installation locks are specifically designed for ZEGA Evo Topcases and can be mounted without drilling or filing!If you require a specific key number, please enter it during the ordering process.Scope of delivery:- 1x lock for top case closure- 1x lock for Rapid Trap

A robust and aesthetically pleasing aluminum case that handles all applications from everyday use to adventure with ease. The ZEGA Mundo builds on the tradition of the legendary ZEGA Case.With the ZEGA Mundo luggage system, we offer a luggage solution for extreme use, backed by 25 years of experience and thousands of test kilometers. Our ZEGA luggage systems are specifically designed for each motorcycle model, customized, and manufactured in Niedereschach, Germany, after thorough quality checks.Advantages at a glance:- Waterproof, dustproof, and extremely high-quality workmanship- Lightweight yet sturdy construction- Specifically developed for your motorcycle model- Luggage rack is bolted to existing mounting points- Quick assembly- Absolutely play-free fit of the cases even after thousands of off-road kilometers- Designed for extreme use- Elegantly integrates into the overall appearance- Automatic locking prevents accidental opening of the closures- Compatible with ZEGA accessoriesIn addition to the ZEGA Pro and ZEGA Pro2 luggage systems, we also offer the ZEGA Mundo luggage systems specifically for your motorcycle model. The reasons for choosing this system are as diverse as our customers themselves. Some appreciate the authentic, simple look of the legendary ZEGA Cases, which they find in the ZEGA Mundo. For others, the ZEGA Mundo luggage system is the entry point into high-quality hard luggage solutions. What unites all is the desire for a luggage system that fits perfectly to the respective motorcycle model, is of high quality, and functions flawlessly even in extreme use.Of course, we have ensured that our ZEGA Pro luggage accessories are also compatible with the ZEGA Mundo. Since all our products are standardized, replacing individual parts is not a problem. You can also expand this system for different uses by purchasing ZEGA Mundo cases of other sizes or ZEGA Pro or ZEGA Pro2 cases.Cases:- Body made of 1.5 mm thick aluminum- Designed for extreme use- Available in 31, 38, or 45 liters volume- Proven high-quality, lockable stainless steel fittings- Ergonomically shaped mounting wheels inside the case- Tight and torsion-resistant- Play-free fit even after thousands of off-road kilometers- Quick assembly- Automatic locking prevents accidental opening of the closures- Installation locks can be easily retrofitted- Compatible with ZEGA accessories- Made in EUIn developing the ZEGA Mundo, the focus was one hundred percent on pure functionality. Practicality, robustness, and technically clear design come together in this aluminum case.To achieve a connection with maximum strength, the indestructible body made of 1.5 mm thick aluminum sheet is connected to the one-piece aluminum base with special rivets. This concept also gives the case a significant increase in stiffness. Furthermore, an integrated, generously sized sealing tape ensures optimal sealing of the seam.The same applies to the specially shaped profile that forms the upper closure of the case body. It stiffens the case and, with the integrated sealing lip that fits snugly into the profile of the lid, ensures a weatherproof closure.Luggage Rack:- Made of stainless 18 mm round steel tube- Additional cross brace for more stability- Suitable for tough off-road use- Also suitable for all ZEGA Pro and ZEGA Pro2 cases- Utilizes existing mounting points- Absolutely passenger-friendly- Elegantly integrates into the overall appearance- Total width: 98 cm Our luggage racks are made from robust and stainless 18 mm round steel tube, ensuring particularly high stability even off the beaten path. An additional cross brace provides more stability, making the luggage system suitable for tough off-road use. Since the luggage rack utilizes existing mounting points, assembly is a breeze.Of course, we have considered that the luggage rack is just as practical for world travel as it is for everyday use. Therefore, we have ensured absolute passenger-friendliness.The system includes:1 x Aluminum case ZEGA Mundo 311 x Aluminum case ZEGA Mundo 381 x Luggage rack with mounting materials

Until now, our pre-assembled Touratech ZEGA Pro cases were only available as a set with the case carriers, but they are now also available individually. The special feature is that the mounting kit, which attaches the case to the carrier, has already been assembled by Touratech.Time-consuming drilling and measuring are a thing of the past. No wobbling or slipping; the pre-assembled case fits perfectly on the Touratech case carrier. The locks are operated from the inside and secure your case theft-proof to the carrier. The case can be easily removed without any tools. With a modern design and at the highest level of technology, our developers have created a masterpiece with the ZEGA Pro. Light yet sturdy, the case, which has a capacity of 45 liters, is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!"And-Black":The anodized version of the ZEGA Pro not only shines with a great black appearance but also effectively prevents abrasion inside the case. The extra thick, high-quality anodized layer provides special surface protection and prevents color changes.The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, while the bottom and shell part are high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected. The extremely robust protective strip on the body is screwed on and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from one side only; the locks serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four mounting eyes do not protrude significantly beyond the case surfaces, making it comfortable to sit on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Vehicle-specific case systems, e.g., for the BMW R1200GS, F800GS, KTM 690 Enduro, and many more, are also available. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust yet easy to use. The advantages at a glance:- Automatic locking prevents the locks from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same key for installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugs.ZEGA Pro Aluminum Case "And-Black" 45 liters.Dimensions: 443 mm x 283 mm x 393 mmWeight: approx. 5.6 kgThe helmet is not included.

The aluminum luggage system is built very robustly, and we have tried to bring the luggage racks and the cases as close to the motorcycle as possible. Many tests have been conducted to ensure that the entire development meets the specified requirements. The rack is made of 18 mm stainless steel tubing, mounted on existing attachment points with special holding clamps and reinforcements. Absolutely no restrictions for passenger operation. - Pre-assembled mounting kits- Sturdy connecting bracket- Total width: 88 cm- Stainless steel rack, blackLuggage Rack:The luggage rack is made from robust 2 mm thick stainless steel tubing with a diameter of 18 mm. The installation is done at existing attachment points. Very robust construction with a cross brace withstands even tough use and fits elegantly into the overall look.ZEGA Pro Cases:In modern design and at the highest technical level, our developers have created a masterpiece with the ZEGA Pro.Light yet stable, the case with a capacity of 31/31 liters is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality workmanship. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, while the bottom and shell part are high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected.The extremely robust protective strip on the body is bolted and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from one side only; the closures serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four attachment eyes do not protrude significantly beyond the case surfaces, allowing for comfortable sitting on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust yet easy to use.The advantages at a glance:- Automatic locking prevents the closures from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same keying of the installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugsThe delivery includes:2 x Aluminum Cases ZEGA Pro "And-Black" 31 liters, with mounting kit 18 mm installed1 x Luggage rack with mounting materials

The aluminum case system is built very robustly, and we have tried to bring the case carriers and the cases as close to the motorcycle as possible. Many tests have been conducted to ensure that the entire development meets the specified requirements. The carrier is made of 18 mm stainless steel round tube, mounted on existing attachment points with special holding clamps and reinforcements. Absolutely no restrictions for passenger operation. - Ready-to-install mounting kits- Sturdy connecting bracket- Total width: 96 cm- Stainless steel carrier, blackCase Carrier:The case carrier is made of robust 2 mm thick stainless steel round tube with a diameter of 18 mm. The installation is done at existing attachment points. Very robust construction with a cross brace withstands even tough use and fits elegantly into the overall appearance.ZEGA Pro Cases:In modern design and at the highest technical level, our developers have created a masterpiece with the ZEGA Pro.Light yet stable, the case with a capacity of 31/31 liters is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, with the bottom and shell part high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected.The extremely robust protective strip on the body is screwed on and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from only one side; the closures serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four attachment eyes do not protrude significantly beyond the case surfaces, making it comfortable to sit on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust yet easy to use.The advantages at a glance:- Automatic locking prevents the closures from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same keying of the installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugsThe delivery includes:2 x Aluminum Cases ZEGA Pro "And-Black" 38 liters, mounted with 18 mm mounting kit1 x Case carrier with mounting materials

The aluminum luggage system is built very robustly, and we have tried to bring the luggage racks and the cases as close to the motorcycle as possible. Many tests have been conducted to ensure that the entire development meets the specified requirements. The rack is made of 18 mm stainless steel round tube, mounted on existing attachment points with special holding clamps and reinforcements. Absolutely no restrictions for passenger operation. - Pre-assembled mounting kits- Sturdy connecting bracket- Total width: 88 cm- Stainless steel rack, blackLuggage Rack:The luggage rack is made from robust 2 mm thick stainless steel round tube with a diameter of 18 mm. The installation is done at existing attachment points. Very robust construction with a cross brace withstands even tough use and fits elegantly into the overall look.ZEGA Pro Cases:In modern design and at the highest technical level, our developers have created a masterpiece with the ZEGA Pro.Light yet stable, the case with a capacity of 31/31 liters is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, with the bottom and shell part high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected.The extremely robust protective strip on the body is bolted and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from only one side; the closures serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four attachment eyes do not protrude significantly beyond the case surfaces, making it comfortable to sit on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust yet easy to use.The advantages at a glance:- Automatic locking prevents the closures from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same key for installation locks available at no extra charge, also available keyed alike to navigation mounts and oil plugsThe delivery includes:2 x Aluminum Cases ZEGA Pro "And-S" 31 liters, mounted with 18 mm mounting kit1 x Luggage rack with mounting materials

The aluminum case system is built very robustly, and we have tried to bring the case carriers and the cases as close to the motorcycle as possible. Many tests have been conducted to ensure that the entire development meets the specified requirements. The carrier is made of 18 mm stainless steel round tube, mounted on existing attachment points with special holding clamps and reinforcements. Absolutely no restrictions for passenger operation. - Pre-assembled mounting kits- Sturdy connecting bracket- Total width: 96 cm- Stainless steel carrier, blackCase Carrier:The case carrier is made of robust 2 mm thick stainless steel round tube with a diameter of 18 mm. The installation is done at existing attachment points. Very robust construction with a cross brace withstands even tough use and fits elegantly into the overall appearance.ZEGA Pro Cases:In modern design and at the highest technical level, our developers have created a masterpiece with the ZEGA Pro.Light yet stable, the case with a capacity of 31/31 liters is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, while the bottom and shell part are high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected.The extremely robust protective strip on the body is screwed and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from one side only; the closures serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four attachment eyes do not protrude significantly beyond the case surfaces, making it comfortable to sit on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust and at the same time easy to use.The advantages at a glance:- Automatic locking prevents the closures from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same keying of the installation locks possible at no extra charge, also available keyed alike to navigation mounts and oil plugsThe delivery includes:2 x Aluminum Cases ZEGA Pro "And-S" 38 liters, mounted with 18 mm mounting kit1 x Case carrier with mounting materials

The aluminum case system is built very robustly, and we have tried to bring the case carriers and the cases as close to the motorcycle as possible. Many tests have been conducted to ensure that the entire development meets the specified requirements. The carrier is made of 18 mm stainless steel round tube, mounted on existing attachment points with special holding clamps and reinforcements. Absolutely no restrictions for passenger operation. - Ready-to-install mounting kits- Sturdy connecting bracket- Total width: 88 cm- Stainless steel carrier, blackCase Carrier:The case carrier is made of robust 2 mm thick stainless steel round tube with a diameter of 18 mm. The installation is done at existing attachment points. Very robust construction with a cross brace withstands even tough use and fits elegantly into the overall appearance.ZEGA Pro Cases:In modern design and at the highest technical level, our developers have created a masterpiece with the ZEGA Pro.Light yet stable, the case with a capacity of 31/31 liters is made entirely of 1.5 mm thick aluminum - waterproof, dustproof, and extremely high-quality processed. We do not want to settle for a simple plastic construction that is only enhanced with aluminum parts for aesthetics!The lid and bottom of the ZEGA Pro are welded, achieving maximum connection stiffness, with the bottom and shell part high-quality riveted (no cheap pop rivets). Weld seams at the edges, which often lead to leaks, are nowhere to be found here. A high-quality silicone seal ensures that the contents of these cases remain optimally protected.The extremely robust protective strip on the body is bolted and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the case lid, which can be completely removed or opened from only one side; the closures serve as hinges.The ZEGA Pro impresses not only with its technology and workmanship but also with many clever detail solutions and a modern, protected design, with the rounded outer shape being a real eye-catcher. For example, the case lid can be retrofitted with a brilliant handle. The four attachment eyes do not protrude significantly beyond the case surfaces, making it comfortable to sit on the good piece.The easy opening even when using a luggage roll, as well as the extensive special accessories we offer for the ZEGA Pro, are additional advantages. Among the special features of the ZEGA Pro is the sophisticated locking system, which is robust and at the same time easy to use.The advantages at a glance:- Automatic locking prevents the closures from accidentally opening- Installation locks can be retrofitted without drilling or filing- Same keying of the installation locks possible at no extra charge, also available keyed alike to navigation mounts and oil plugsThe delivery includes:2 x Aluminum Cases ZEGA Pro 31 liters, mounted with 18 mm mounting kit1 x Case carrier with mounting material

- suitable for our replacement canister 070-0573- includes 2 straps, canister not included