YAMAHA

The developers at Yamaha have created a motorcycle with the new T7 that invites excursions into the terrain. Some of the positive off-road characteristics have been further improved by our Touratech developers. This engine protection is an absolute revolution! Touratech has placed great emphasis on stability and functionality. Larger damages, such as holes in the engine block, can be effectively avoided with the large Touratech engine protection. For maximum stability, the multiple angled recesses in the 4 mm thick aluminum base plate play a key role, while the force of an impact is distributed over 8 mounting points thanks to two additional 4 mm stainless steel mounting plates on the engine. The ground clearance is not restricted by these two base plates.For Yamaha Tenere 700 up to 2020 (Euro4)

The Touratech fairing crash bars hug the T7 as closely as possible, incorporating the innovative, sporty design of the Yamaha.The special construction ensures optimal force distribution and protects not only the radiator but also the fairing from damage in the event of falls and crashes.

The Touratech fairing crash bars hug the T7 as closely as possible, incorporating the innovative, sporty design of the Yamaha.The special construction ensures optimal force distribution and protects not only the radiator but also the fairing from damage in the event of falls and crashes.

This handy, compact basic first aid kit is ideal for short trips, cycling tours, and other sporting activities. Practical, small, lightweight.This kit contains everything that is important and required according to DIN 13167 for motorcyclists. Adhesive bandages, instant wound dressings, bandage packages, emergency blanket, sterile dressing, scissors, vinyl gloves, and a first aid manual are included.This first aid kit should be an essential part of your equipment. The bag is made of water-repellent nylon fabric with a large zipper. The First Aid Kit DIN 13167 is specifically designed for motorcycle use and contains the following:- 1 roll of adhesive bandage- 8 packs of instant wound dressings- 2 bandage packages- 1 emergency blanket- 1 sterile dressing- 1 pair of scissors- 4 bags of vinyl gloves- 1 first aid brochure- 1 contents listIn Austria, carrying a DIN 13167 first aid kit on a motorcycle is mandatory!Dimensions and Weight:- Dimensions: 15 x 10 x 5 cm- Weight: 240 g

Successful rally drivers set the example: instruments are installed in the central field of vision.And what works in rallies is also a perfect solution for everyday use!With our "mounting adapter above the instruments," you always have your GPS or roadbook firmly in view. No more distractions to the side or downwards; your eyes stay focused on the road.

The handguards made from nearly unbreakable plastic feature a modern design, high protective effect, and can be easily mounted on the Yamaha with the included mounting kit. The handguards can be combined with various spoilers, providing optimal wind and weather protection. A very robust and stable construction that has proven itself in many rally events and on other motorcycles.- including special adapters for mounting on the Tenere 700Installation only possible with handlebar risers (e.g. 01-632-5255-0)!- Delivery includes: Left and Right

The 20 mm handlebar riser results in a more upright and significantly relaxed seating position. The adjustment range for the handlebar tilt is increased, which further enhances comfort.Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages especially for taller riders.Overall, this leads to a noticeable increase in stamina and concentration. Long highway stretches lose their intimidation, and even fast and challenging sections off-road become easier to tackle.

The Yamaha Tenere 700 is the ideal motorcycle for exploring the world off the beaten path. However, on gravel roads, it often happens that the headlight gets damaged by stones kicked up by vehicles ahead. The Touratech headlight guard effectively prevents larger stones from damaging the headlight glass. The grid design provides a sturdy off-road look.Another exceptional feature: With the quick-release mechanism, you have the option to clip on or remove the headlight guard as needed.Of course, everything necessary for installation is included in the delivery.Details:- effective protection of the lamp glass- made from laser-cut, anodized aluminum- robust construction, withstands even large stones- quick-release for easy attachment and removal- great appearance The headlight guard is designed for off-road use and is not permitted under the German Road Traffic Regulations (StVO). Please check your national regulations!

Especially for large adventure touring bikes, it is difficult to find a high-quality and perfectly fitting cover. Treat your prized possession to a bit of comfort in the dark garage or cold season and protect your valuable motorcycle from dust and paint scratches. The Touratech Indoor Cover "Super Soft" surpasses even some sofa blankets in terms of "softness"! The cover is breathable, preventing condensation that could lead to mold or corrosion. Hours of spring cleaning in the best riding weather are a thing of the past with this cover!The highlight: The cover is large enough that you can leave your luggage mounted. Even your top case can remain on the motorcycle - a zipper allows the cover to be enlarged in this area if needed.Advantages at a glance:- For truly large adventure touring bikes including luggage systems- For luggage system widths up to 110 cm- Zipper for optional use with top case- High-quality dust and paint protection- Breathable, no condensation under the cover- Black, in Touratech design Dimensions:- Length: 272 cm- Width (at the mirrors): 104 cm - Height front: 147 cm- Height rear: 137 cmMaterial:100% polyester, approx. 220 g/m²

Puncture Repair Kit AirMan ResQ Scout Tire Repair Set with 12V Compressor and 100ml Tire Sealant for MotorcyclesThe ideal travel companion and immediate helper for tire punctures!The AirMan ResQ Scout Repair Kit offers a portable solution for repairing flat tires, inflating tires, and monitoring tire pressure for motorcycles, quads, ATVs, UTVs, off-road vehicles, and scooters.Seals and repairs punctures caused by objects up to 6 mm.- Ideal for motorcycles and ATVs- The same solution has been supplied to leading vehicle manufacturers- Powerful 12V compressor with cigarette lighter connection- Analog precision gauge with PSI/BAR display- Selection of nozzle accessories and built-in vent button- 100 ml durable tire sealant - Fixes tire punctures up to 6 mm in diameter- Water-based sealant can be easily washed out of the tire to allow for complete tire repair- Non-toxic, non-corrosive, TPMS-safe, and approved by the largest automotive manufacturers in the world- Suitable for all vehicle brands- Linen carrying bag for neat and easy storageDelivery includes:- 12V power supply connections- 4 clamps- Compressor- 100 ml sealant

Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide boot-friendly 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with shot-blasted surface and laser engraving- Includes ABE

The Touratech luggage rack made of stainless steel for the MT-09 Tracer is a sturdy luggage rack for the Touratech ZEGA Pro cases. The perfect luggage system for long journeys. It not only visually matches the frame of the MT-09 Tracer but is also a rust-free system made from 18 mm stainless steel tubing, ensuring particularly high stability even off the beaten path.Installation is done at existing mounting points as close as possible to the vehicle frame. With just a few screws, the very robust construction can be mounted or dismounted for off-road use. The mounting brackets remain unobtrusive on the motorcycle.- made of 18 mm stainless steel tubing, black coated- also suitable for tough off-road use- no restriction for the passenger- fits elegantly into the overall look of the Yamaha MT-09 Tracer - easy assembly / disassembly

With the Touratech end caps, you always add a color-coordinated accent!- individually replaceable on many hand guards, oil filler caps, or frame plugs- made of colored anodized aluminum1 piece per packPlease order 2 pieces for hand guards

1 x M10x1.25 R to M10x1.25 R1 x M10x1.25 R to M10x1.25 L For mounting all replacement mirrors (M10x1.25) with right-hand thread to left-hand thread.

The perfect solution for more luggage on the passenger seat!With two outer pockets, a large main compartment, the elastic drawstring on the lid, the expansion option via a full-length zipper, and the practical carrying handle, this passenger bag is ready for any requirement!It visually matches perfectly with our other luggage solutions from the Ibarra series and is easily attached with two easy-to-open zippers to the vehicle-specific base plate. With a water-repellent cable entry into the interior, charging electronic devices is no longer a problem. Made from high-quality Cordura with YKK brand zippers!Dimensions: (L x W x H) approx. 33 x 30 x 20/32 cm; Volume: approx. 17/22 liters.

The professional motorcycle tool for on-the-go and for the workshop at home, suitable for 80% of all adjustments and repairs of your motorcycle! Whether on a long motorcycle journey or a short ride, this 60-piece motorcycle tool kit allows you to carry out necessary tasks at any time.   The sturdy double-layer roll-up bag, weighing only 1.65 kg, comes with a compact motorcycle tool set made from the best materials: the S2 bits with black phosphate rust protection. The sockets and wrenches are Cr-V satin chrome plated. With its compact dimensions, this motorcycle tool bag in Touratech design always finds a place on your bike.   With MIT socket system (metric, inch, Torx): suitable for square, 6 or 12-point, star, spline, and damaged nuts.     The Touratech Professional Tool Set Motorcycle Basic Set, 60 pieces, includes: 3-in-1 multifunction tool: T-handle - 1/4" hex bit ratchet - 11 mm ratchet Extension "Turbo Sleeve" for 1/4" hex bit ratchet Socket adapter 6mm square to 1/4" 13mm ratchet wrench (ring/open-end wrench) Socket adapter 13mm to 3/8" Bit set internal hex T8, T10, T15, T20, T25, T27, T30, T40, T45, T50, Phillips PH3, slotted 5mm (drive: 1/4" = 6.35mm, length: 25 mm) Bit set internal hex H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H7, H8, H10, Phillips PH2 (drive: 1/4" = 6.35mm, length: 25 mm) Socket MIT: 6 mm (1/4, E8) with drive: 1/4" = 6.35mm Socket MIT: 8 mm (5/16, E10) Socket MIT: 10 mm (3/8, E12) Socket MIT: 11 mm (7/16, E14) Socket MIT: 12 mm (15/32, -) Socket MIT: 13 mm (1/2, -) Socket MIT: 14 mm (9/16, E18) Socket MIT: 15 mm (19/32, -) Socket MIT: 17 mm (11/16, -) Socket holder (7 x 1/4" & 2 x 3/8") 8 mm ring/open-end wrench, MIT on the ring side 10 mm ring/open-end wrench, MIT on the ring side 12 mm ring/open-end wrench, MIT on the ring side 14 mm ring/open-end wrench, MIT on the ring side 16 mm ring/open-end wrench, MIT on the ring side Small tire pressure gauge up to 3.5 Bar (kg) or 50 psi Locking pliers, 169 mm long 10x cable ties, 100 mm long 14 mm spark plug socket 3/8" 16 mm spark plug socket 3/8" Poplock extension 3/8" with 16 mm external hex, 125 mm long High-quality roll-up bag in Touratech design     Weight: 1.65 kgDimensions open: W 30 cm x H 26.5 cmDimensions rolled up: Ø 7.5 x H 26.5 cm

These progressive fork springs are perfectly suited to the requirements of the fork for the Yamaha MT 09 Tracer. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * Yamaha MT 09 Tracer *For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Yamaha MT 09 Tracer are:=> Touratech Suspension shock absorber for Yamaha MT 09 Tracer Type Level2 01-630-5880-0=> When replacing only one component, optimal handling will not be achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.

These progressive fork springs are perfectly tuned to the requirements of the fork for the Yamaha XT1200Z Super Tenere. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Not suitable for Yamaha XT1200ZE Super TenereFor all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Yamaha XT1200Z Super Tenere are:=> Touratech Suspension shock absorber *rear* for Yamaha XT1200Z Super Tenere type *Level2* 01-046-5880-0=> When replacing only one component, optimal handling will not be achieved.Tip for adjusting the original fork with these fork springs:Rebound: 10 clicks / Compression: 7 clicks / Spring preload: 5 rings visibleDelivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the Yamaha XT660R. The shock absorber and the fork thus have a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a professional workshop.

The Rack Pack with the proven roll closure keeps the contents absolutely waterproof and is the all-time favorite of every adventure biker. The inner pockets allow for quick access to notebooks and other small items without having to empty the entire bag for the trip. The mesh pocket on the outside holds items that don't necessarily need to be waterproof but must be easily accessible. The reflectors on the sides provide passive safety. With a volume of approximately 50 liters, the bag offers enough space for the next tour. The optional carrying strap (055-1621) makes it a universally usable travel bag.Touratech Waterproof EXTREME Edition The new product line from Touratech combines everything you could wish for from waterproof soft luggage: The bags are extremely robust – they can easily withstand a fall. The bags are, of course, extremely waterproof, no matter from which direction the rain comes. The extremely high quality is evident in the workmanship, fit, and durability. In addition, the bags feature an extreme design with many practical features and a distinctive color scheme – black on the outside and yellow on the inside to make it easier to find the contents.The specially developed material mix not only offers a unique tactile experience. It is both a promise and a trademark: Whether on-road or off-road; UV rays, rain, or snow; the EXTREME Edition from Touratech Waterproof can handle it all.Start your adventure now with the Touratech Waterproof EXTREME Edition!

The Touratech radiator guard protects the vulnerable fins of the radiator from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey will be much safer with minimal effort!Discreet in appearance yet unmistakably in the Touratech style, the radiator guard made of laser-cut, black powder-coated stainless steel integrates perfectly into the design of the MT-09 Tracer.Details:- black anodized aluminum- laser-cut- optimal protection of the radiator- does not affect cooling performance- lightweight and robust- attractive appearance

Specifically designed for mounting on the luggage racks of adventure bikes such as the BMW GS models or the KTM Adventure series, the Touring tail bag also fits the luggage racks of most current adventure bikes. It is super easy to install and provides easily accessible additional storage space. The passenger is not cramped in any way, and the position of the bag far back on the vehicle does not unnecessarily complicate mounting for the rider. Non-slip, precisely fitting base plate for a play-free and stable hold on the vehicle High-quality Cordura® Washable and easy to clean Reflective inserts for increased safety Molle system for additional luggage on the lid Waterproof, high-quality zippers Elastic, reflective drawstring with quick-release for easy attachment of gloves or rain jacket Large main compartment without dividers for maximum space and individual loading Rain cover available as an option Includes storage bag/multifunctional pouch (055-0555) Please use a paint protection film if necessary! Dimensions: (L x W x H) approx. 24 x 29 x 17 cmVolume: approx. 9 litersThe completely newly developed Touring soft luggage series meets the desire of many touring riders for a straightforward and functional soft luggage setup. The excellent workmanship and high-quality Cordura® make the products in the Touring series long-lasting travel companions. The material has a premium feel and is treated to be water-repellent, so a few raindrops won't harm the contents. During the day, it is almost invisible in the modern design, while the bright reflective applications provide a significant increase in safety at night.Robust and durable zippers complete the high-quality features of the new Touring series.

The Level 2 Shock Absorber is the right choice for long-distance and touring use for the Yamaha XT1200Z Tenere. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic spring preload, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly adjusted by hand via the hydraulic spring preload. The damping adjustment of this Level 2 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the Yamaha XT1200Z Tenere.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the Yamaha XT1200Z Tenere from 2010 is:=> Progressive fork springs, Yamaha XT1200Z Tenere part no. 01-046-0307-0Replacing only one component will not achieve optimal handling.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle.Features of the Touratech Suspension Level 2 Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic high-end spring preload via a conveniently positioned handwheel. => QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings. The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustmentsfor higher rider weights (more than 100kg) and/or for predominantly passenger operation / with travel luggage arepossible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, and a short break is included. But it's easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar support is usually never at hand when it's needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double. The exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.