APRILIA

Winglets on a Motorcycle noticeably improve handling. The pressure on the front wheel is increased. the motorcycle is more stable during acceleration and deceleration. To improve all these stats. we made them bigger than original. This gives the bike an extra aggressively look an also enhances the driving.​ In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Fairings have beend developed in order to protect the driver of the wind and to increase air drag while driving. In order to improve the protection. we developed wind deflectors.n which help the driver to also get his arms behind the fairing while driving.  As an great bonus. there is now also a high quality carbon part in the direct view of the eyes. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Fairings have beend developed in order to protect the driver of the wind and to increase air drag while driving. In order to improve the protection. we developed wind deflectors.n which help the driver to also get his arms behind the fairing while driving.  As an great bonus. there is now also a high quality carbon part in the direct view of the eyes. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Carbon Seitenverkleidung mit Windabweiser Optimierter Schutz und Aerodynamik Erweiterte Seitenverkleidung für verbesserten Windschutz der Arme Frontakzent aus hochwertigem Carbon Perfekte Integration Experten legen Faserlagen für harmonisches Design ein Kombinierbar mit weiteren Carbonteilen für beeindruckendes Gesamtbild Hochwertiges Material Verwendung von Formel 1 und Raumfahrt inspiriertem Prepreg Gewebe Handlaminiert und im Autoklaven ausgehärtet Dreifache Steifigkeit von Stahl bei geringerem Gewicht Einzigartige Schutzbeschichtung Exklusive Kunststoffbeschichtung für Umweltschutz Matte Klarlackierung für UV-Schutz Unvergleichlicher Tiefeneffekt Produktdetails Mit ABE - keine zusätzliche Eintragung nötig Inklusive Haltekit Anbaufertiger Zustand TÜV zertifizierte Qualität ISO 9001 zertifizierte Produktion Verwendung originaler Befestigungspunkte Schnelle und einfache Montage Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Carbon Seitenverkleidung mit Windabweiser Perfekter Schutz und Stil Erweiterter Windschutz für Arme durch breiteren Windabweiser Eleganter Blickfang aus hochwertigem Carbon an der Front Hochwertige Materialien Verwendung von Prepreg-Gewebe, bekannt aus Formel 1 und Raumfahrt Handlaminiert und im Autoklaven ausgehärtet für maximale Steifigkeit Leichter als Stahl bei dreifacher Steifigkeit Einzigartige Schutzbeschichtung Exklusive Kunststoffbeschichtung für optimalen Umweltschutz Hochglänzende Klarlackierung für beeindruckenden Tiefeneffekt UV-beständig Produktdetails Mit ABE - Keine zusätzliche Eintragung nötig Inklusive Haltekit Anbaufertige Lieferung TÜV zertifizierte Qualität ISO 9001 zertifizierte Produktion Einfache Montage mit originalen Befestigungspunkten Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Adapter for connecting devices with a cigarette lighter plug to a motorcycle with a on-board network socket.

The special mount for our ZEGA top cases.Completely made of stainless steel and extremely robust, the top case carrier provides the perfect support for the ZEGA top cases. The carrier has been specifically designed in terms of design and function for the requirements of the Aprilia Tuareg 660.A special bracket construction ensures extremely high stability and load capacity, which is attached to a total of 5 existing mounting points. Secure hold for your luggage even under the most extreme conditions! Additionally, the grab handles for the passenger are part of the carrier. Of course, the top case can be mounted without restrictions for the passenger. The carrier can be used both individually and in conjunction with the luggage system.Details:- made of stainless steel - black plastic-coated- robust and secure- integrated grab handles - without restrictions for the passenger- can also be used without the luggage system or as a luggage bridge- easy installationDelivery includes no top case