Ignition Capacitor
Ignition Contact
Ignition Contact
The ignition lock cover for the BMW R Nine T / Scrambler Comes on top the original component and. with the weight of only 18g. does not really influence the Performance of the bike in a negative way. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
The carbon ignition rotor cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is attached to the engine using the 4 original screws. The lower section of the ignition rotor cover is designed as thick as possible to provide the most effective engine cover protection possible in the event of an accident. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.Â
Original BMW Spare Part Additional Information The part with the BMW part number 32 34 1 092 452 is used on the following vehicles:
The injector cover for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 30g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
The injector cover in carbon for the BMW R 90T is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
Injector cover left Side Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
Injector cover right Side- Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
ABE in preparation The Carbon fuel injector cover for the BMW R 1300 GS gives your motorcycle a unique. sporty-luxurious look. The high-quality carbon component is mounted directly on the cylinders of the boxer engine and is therefore clearly visible. The striking. exposed position of the carbon part emphasizes the noble appearance of your motorcycle and gives it a personal touch. The name Ilmberger stands for highest quality and innovation in carbon fiber manufacturing. Each part is produced in our own facility. where we use specially developed prepreg for Ilmberger as the base material. This is processed in an elaborate procedure in the autoclave. which offers numerous advantages.Prepreg. a pre-impregnated carbon fabric. is characterized by an even resin distribution with a simultaneously high fiber volume content. This leads to maximum strength and increases the flexibility of the components. Processing in the autoclave. a high-pressure oven that operates under controlled temperature and pressure conditions. ensures perfect. uniform curing and a flawless surface. This method prevents air inclusions in the material and ensures consistently high quality of the parts.Our carbon parts are laminated by hand with great experience and care. allowing for consistent fiber alignment without distortion. After curing in the autoclave. the edges of the parts are precisely cut by robot to ensure a perfect fit and highest quality.A globally unique step in Ilmberger's production is the complete plastic powder coating of all carbon parts. This coating not only protects the parts from environmental influences but also gives them an incomparable depth effect. No other carbon manufacturer offers this type of sealing. which prevents the aging of the parts and significantly extends their lifespan. More information about the plastic powder coating can be found here.The final clear coat layer on this component is high-gloss and ensures a perfect. smooth surface that further emphasizes the luxurious-sporty look of our carbon parts. Each part that leaves our production is a masterpiece of technology and design that meets the highest standards.Ilmberger is not only a leading manufacturer of carbon parts for the aftermarket but also a recognized OEM producer for renowned manufacturers such as Ducati and BMW. Among other things. we manufacture parts for BMW in the World Superbike Championship (WSBK). as well as for the BMW factory team in the Endurance World Championship (EWC). where our parts are regularly put to the test under the toughest conditions. The expertise gained from this flows into each of our products. improving every single component. The expertise gained from this flows into each of our products. improving every single component.The facts: Production in our own facility according to ISO 9001 Including ABE - Part is legal to use on the street Use of prepreg specially developed for Ilmberger Manufacturing in autoclave for maximum strength and perfect surfaces Unique plastic powder coating for protection and a special depth effect Hand lamination by experts with years of experience Precise edge cutting by robot High-gloss clear coat layer for a flawless surface No aging of parts thanks to multi-layer protection against UV light Delivery in ready-to-install condition TÜV-certified quality
Angeboten wird hier ein GebrauchtteilFahrzeug: K1200RSHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, AbschürfungenTeilenummer: 46632307869
Angeboten wird hier ein Gebrauchtteil Fahrzeug: K589 K1100RS Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer Teilenummer:46632307641 46632307642
Once you have experienced the advantages of inner bags for luggage, you will not want to do without this useful accessory!The high-quality, custom-fit inner bags made from durable Cordura fabric make packing before the ride incredibly easy. You can finally be sure that everything you conveniently pack into the inner bags through the large zipper lid can actually be stored in the luggage case.Models up to 2012 on the right side, models from 2013 on the left side- For all model years!During the journey, the dirty and heavy luggage cases and the top case can remain on the vehicle, and all the luggage can be comfortably carried to the tent or room in the luggage inner bags thanks to two carrying handles. The empty cases on the vehicle now provide enough space for rider clothing and equipment that is not needed at the accommodation.The "large" inner bag fits perfectly into the BMW Variotopcase of all GS models and into the larger of the two Variokoffer, and the all-around zipper with expansion pleat also allows for easy volume adjustment of the cases.Dimensions of the "large" inner bag: (L x W x H): approx. 38 x 22/28 x 27 cmVolume: approx. 22/29 litersColor: black
Once you have experienced the advantages of inner bags for luggage, you will not want to do without this useful accessory!The high-quality, custom-fit inner bags made from durable Cordura fabric make packing before the ride incredibly easy. Finally, you can be sure that everything you conveniently pack into the inner bags through the large zipper lid can actually be stored in the luggage case.Models up to 2012 on the left side, models from 2013 on the right side- for all model years!During the journey, the dirty and heavy luggage cases and the top case can remain on the vehicle, and all the luggage can be comfortably carried to the tent or room in the luggage inner bags thanks to two carrying handles. The empty cases on the vehicle now provide enough space for rider clothing and equipment that is not needed at the accommodation.The "small" inner bag also has the option to adjust the volume to fit the luggage case and leaves enough space above the cutout of the end silencer to accommodate a first aid kit, oil, or a small fuel bottle with the help of a power Velcro.Dimensions of the "small" inner bag: (L x W x H): approx. 38 x 14/18 x 27 cmVolume: approx. 15/18 litersColor: black
Oil Pump Rotor
These installation locks are specifically designed for Touratech side bags with ZEGA docking panel.If you require a specific key number, please enter it during the ordering process.Delivery includes:- 2x lock- 4x keys
The instrument cover for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 36g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
Accessories for BMW Motorcycles
Accessories and spare parts for BMW motorcycles from the C1 scooter to the Roadster and GS Adventure, up to the Heritage R18.