Special accessories for Hepco&Becker Gobi side cases. The construction of the GOBI side case, made of two honeycomb-connected shells, creates a 3.5-liter cavity between the inner and outer case shell. This can be made available with this faucet.

Dimensions: WxHxD = 44x11x26 rubberized zipper waterproof inner bag

The standard bracket of the aluminum rack is not compatible with the aluminum top case 35. Therefore, this bracket is used as an adapter and is bolted to the aluminum rack.

Attachment on the outside of the case. Provides the option to carry your own accessories with straps (not included in the delivery) on the case. NOTE: Holes must be drilled into the case/top case.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

compatible with almost all model-specific HEPCO&BECKER side case carriers, either permanently mounted or in the Lock-it version (not included) Absolutely waterproof due to glued special seal Impact-resistant plastic components Made from 1.5mm thick anodized aluminum sheet Dual-opening lid - lid removable Top loader: Quickly and securely load from above thanks to generous opening Includes luggage net on the inside of the lid Includes key and locking cylinder Lid lockable, case lockable to the carrier Please enter desired locking in the comment field during the ordering process Case sets are automatically delivered with the same key Child's play to remove from the case carrier Perfectly adaptable to your needs through a comprehensive range of accessories Not suitable for a helmet Recommended load: 10kg per case (please observe the notes from the vehicle-specific carrier and the motorcycle manufacturer's specifications) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Please observe the vehicle-specific notes of the carrier and the model-specific information from the motorcycle manufacturer.

suitable for almost all model-specific HEPCO&BECKER side case carriers, either permanently mounted or in the Lock-it version (not included) Absolutely waterproof due to glued special seal Impact-resistant plastic components Made from 1.5mm thick anodized aluminum sheet Dual-opening lid - lid removable Top loader: Quickly and securely loadable from above thanks to generous opening Includes luggage net on the inside of the lid Includes key and locking cylinder Lid lockable, case lockable on the carrier Please enter desired locking in the comment field during the ordering process Case sets are automatically delivered with the same key Child's play to remove from the case carrier Perfectly adaptable to your needs through a comprehensive range of accessories not suitable for a helmet Recommended load: 10kg per case (please observe the notes from the vehicle-specific carrier and the motorcycle manufacturer's specifications) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Please observe the vehicle-specific notes of the carrier and the model-specific information from the motorcycle manufacturer.

6KT Screw

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1100GS Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet , Kratzer BMW Teilenummer: 46622324240

Fairing Screen Holder - BMW R 1200 RS (LC) from 2015.The cockpit cover in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part was manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary for us, was subsequently coated with a clear plastic coating for protection against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The Holder tank vent in carbon for the BMW R NineT Serie is a direct replacement for the original component.it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

Hochwertige CNC-gefräste HP Fußrastenanlage. Hochfeste Aluminiumlegierung, leicht und extrem formstabil. Korrosionsbeständig, dreifarbig eloxiert. Fußraste, Schalthebel und Schaltweg einstellbar. Inklusive Carbon-Fersenschutz. Zusatzinformation:

High-quality CNC-machined HP footpeg system. High-strength aluminum alloy, lightweight and extremely shape-stable. Corrosion-resistant, three-color anodized. Footpeg and brake lever adjustable. Includes carbon heel guard. Additional Information:

Slip-on silencer, completely made of titanium Powerful sound, low weight, and sporty appearance Weight saving compared to stock: approx. 1.5 kg Single outlet end piece End cap and heat shield made of carbon Power and torque at stock levels Akrapovič logo laser-etched on the side With road traffic approval (EU-ABE)¹ 2014-2016 Additional Information

Horn (Starkton) 12V Bosch - Erstausrüsterqualität- nominal voltage: 12V power consumption: 60 W light Diameter: 125 mm connections: 2 Frequency range: 375 Hz volume: 115 dB (A) - Color: black

Horn (Starkton) 12V Bosch - Erstausrüsterqualität- nominal voltage: 12V power consumption: 60 W light Diameter: 125 mm connections: 2 Frequency range: 500 Hz volume: 115 dB (A) - Color: black

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Kratzer und AbschürfungenTeilenummer: 61322346423

Magura HC1 brake master cylinder with a 15mm piston diameter and long lever of 180mm.   The feeling of braking and clutching with significantly more precision while experiencing a solid, direct pressure point excites every motorcyclist. The fact is: Once you have experienced the performance of a Magura radial master cylinder, you will be reluctant to give up that experience. Thanks to the angled radial inclination of the master cylinder, the HC1 impresses with ideal mounting conditions. Like all branded products from Magura, this ABS-compatible radial master cylinder stands out with the latest technology, ideal ergonomics, and excellent craftsmanship down to the last detail.     The HC1 brake/clutch master cylinder comes with a pre-assembled brake light switch and a reservoir. As spare parts, various types of reservoirs with matching holders and a mirror clamp, as well as levers in two different lengths, are available.       For superbikes, supermoto, and street sport bikes Optimal lever kinematics Lever reach adjustable to individual preferences Extremely high-quality manufacturing Levers and cylinders are forged parts Direct pressure point Feel and powerful braking and clutching Space-saving design Convincing price-performance ratio ABS-compatible     Scope of delivery:   HC1 Hollow screw with seals Standard clamp ABE for brake master cylinders Decoupled reservoir with mounting Pre-assembled switch User manual  

The original crash bars of the Adventure provide our elaborately designed bags with additional storage space for all the small items that are needed quickly. The crash bar bags are easy to attach with Velcro straps, withstand any load, can be easily removed when needed, and fit perfectly as a complement to our other soft luggage solutions for the Adventure!- we use certified Cordura fabric- Teflon coating with nano-technology as protection against moisture, dirt, oil, and fading- washable and easy to clean- reflective inserts from 3M Scotchlite ensure optimal visibility- built for extreme loads and long durability- best fit- secure attachment yet quick to remove from the vehicle- low weight with high payload and large usable volume- water-protected YKK zippersDimensions: (L x W x H) approx. 18 x 7 x 35 cmVolume: approx. 2 x 3 liters.Attention: Please use a paint protection film if necessary!

The tail bag in classic Ibarra design!Specifically designed for mounting on the luggage racks of adventure bikes such as the BMW GS models or the KTM Adventure series, the Ibarra tail bag also fits on the luggage racks of most current adventure bikes. It is super easy to install and provides easily accessible additional storage space. The passenger is not restricted in any way, and the position of the bag far back on the vehicle does not unnecessarily complicate mounting for the rider.Non-slip, precisely fitting base plate for a play-free and stable hold on the vehicleHigh-quality Cordura®Washable and easy to cleanReflective inserts for increased safetyWaterproof, high-quality zippersElastic, reflective drawstring with quick-release for easy attachment of gloves or rain jacketLarge main compartment without dividers for maximum space and individual loadingRain cover available as an optionPlease use a paint protection film if necessary! Dimensions: (L x W x H) approx. 24 x 29 x 17 cmVolume: approx. 9 liters

Idle jet for Bing constant pressure carburetor type 64-3 Total length 23 mm; Head diameter 5.4 mm; Thread M 6x0.75 - Replacement part for Bing carburetor: 64/26/315 - 316 64/32/323 - 324 (BMW R80 Bj.81 US) 64/32/361 - 362 (BMW R65/R65RT Bj.85) 64/32/381 (Ducati Indiana 350) Technical Data:For carburetor: Bing Thread: M6 Jet size: 40 Jet type: Idle jet Head shape: Round head

Idle jet for Bing constant pressure carburetor type 64-3 Total length 23 mm; Head diameter 5.4 mm; Thread M 6x0.75 - Replacement part for Bing carburetors: 64/26/301 - 304 64/26/317 - 318 64/28/301 - 304 64/32/303 - 306 64/32/311 - 312 64/32/321 - 322 (BMW R80/7 US) 64/32/335 - 336 (BMW R65 US) 64/32/347-354 64/32/357-359 64/32/3030 64/32/3040 64/32/375 -377 (Ducati Indiana 650 US) -379 (Ducati Indiana 750 US) - 385 Technical Data:For carburetor: Bing Thread: M6 Jet size: 45 Jet type: Idle jet Head shape: Round head

Ignition Capacitor Bosch   Diameter: 18 mm Length: 28 mm Capacitance: 0.22µF

Ignition Coil