The Touratech headlight guard for the BMW R 1300 GS effectively prevents damage to the headlight very effectively!The BMW R 1300 GS has a very distinctive headlight! The relatively small light lens offers less "impact area" than larger headlights, but this also deserves adequate protection!Because even a stone kicked up by the vehicle in front can be enough to leave you in the dark permanently.The effectiveness of the 10,000 times proven design is confirmed by the experiences of our customers.Additionally, the headlight guard is equipped with a quick-release mechanism. This allows for seconds-fast removal and reattachment of the protective shield. A significant gain in comfort, whether for cleaning the headlight or switching to public roads. Only the mounting elements remain securely screwed and almost invisible on the motorcycle.And last but not least, the Touratech headlight guard gives the BMW R 1300 GS an extra touch of adventure aesthetics!The headlight guard is designed for OFF-road use and is not permitted under the German Road Traffic Regulations (StVO). Please check your national regulations!

BMW R1200GS LC + Adventure headlight protection for original BMW LED auxiliary lights, set, black item Description  Robust enough to protect against falling rocks - filigree enough to get the light output!  The protection of black anodized aluminum can easily fit to the original BMW LED Fog auxiliary lights mounted werden.Lieferumfang: 1x headlight protection right, 1x left headlight protector, 1x mounting hardware and installation instructions

JMP Heated Grips Length of grip rubber 120 mm - 12V operation- Heating power adjustable in five levels- Electronic switch for screw and adhesive mounting- For 22 mm handlebars- Open grip end with closure cap- Grip rubber mixture is resistant to environmental influences and heat- Includes grip adhesive Power Level 1: 41.85WPower Level 2: 43.74WPower Level 3: 44.96WPower Level 4: 45.5WPower Level 5: 45.9W

Heckschutz-Zusatzbügel für BMW G 310 R (2016-2025)Der Zusatzbügel bietet einen zusätzlichen Schutz des Endtopfes. Für Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1150RT Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen, 1 Halter eingerissen Teilenummer: 52537661177 / 178

The heelguards in carbon for the BMW S 1000 XR are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The heelguards in carbon for the BMW S 1000 XR are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The heel guard in carbon for the BMW S 1000 RR (from 2015) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The heel guard in carbon for the BMW S 1000 RR (from 2015) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The heel guard in carbon for the BMW R 1200 GS is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The heel guard in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice.The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The heelguards in carbon for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) / K 1300 R (2008-now) Models are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Angeboten wird hier ein Gebrauchtteil Hersteller: BMWFahrzeug: R1100GS Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, leicht abgegriffenTeilenummer: 61311459982

Hattech HELLFIRE Silencer Brilliant BOXER sound NO street approval in Germany Special design of the exhaust system License plate holder Indicator holder for original and mini indicators LED license plate lighting This item is a custom-made product. It is handcrafted in Germany. Therefore, a production time of up to 4 weeks is possible!

2 pcs. stickers, approximately 120x20mm Made from high-quality film, which is also used for traffic signs, for example. Solvent-free adhesive surface, suitable for all helmet types. A real safety plus for rides at dusk and in the dark. With transfer tape for precise positioning (can be applied wet or dry).

The counter holder, which is mounted to the bag, is included with the model-specific tank ring. If you want to use this tank bag as a second tank bag on your tank ring, you will need an additional tank bag counter holder. Item: 506000 (Lock-it) or 516000 (Basic) Scope of delivery: 1x tank bag Note:The counter holder, which is mounted to the bag, is included with the model-specific tank ring. If you want to use this tank bag as a second tank bag on your tank ring, you will need an additional tank bag counter holder. Item: 506000 (Lock-it) or 516000 (Basic) Material 100% polyester PE foam (100% polyethylene) reinforced side walls for shape retention sturdy base shell made of EVA, covered with Lycra stretch Comfort/Features outer pockets organizer compartments 360-degree zipper for volume expansion 3M-SCOTCHLITE™ reflective piping integrated rain cover map and navigation pocket integrated in the lid carrying handle, luggage hook, and carrying strap cable outlet 2-way zipper (lockable with a small combination lock, for example) Attachment on the motorcycle model-specific Lock-it or Basic tank ring from Hepco & Becker individual positioning depending on tank shape and handlebar angle through flexible attachment channel recommended load: 3kg (please observe the motorcycle manufacturer's specifications, as well as any model-specific notes on the tank ring) recommended maximum speed: 130km/h

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered