The almost spongy feeling is eliminated by the handlebar locking adapter. With an adjustment screw, the motorcycle handlebar of your BMW R1100RS and R1150RS can be fixed in just a few seconds and will then remain almost rigid. This is particularly desirable during sporty riding.The advantage: The fixation can also be quickly undone.All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Plate BMW R1100RTincluding ABETime for news!With the new handlebar plate, we fulfill the wishes of many BMW R1100RT riders.The handlebar plate brings the handlebar 15 mm closer and 25 mm higher to the rider.The installation time is less than half an hour. All cables are long enough.This achieves a natural ergonomics for a healthier sitting position. This item has been mounted and tested on original motorcycles - without any modifications.

Handlebar Plate BMW R1200RT up to 2014including ABETime for news!With the new handlebar plate, we fulfill the wishes of many BMW R1200RT riders.The handlebar plate brings the handlebars 15 mm closer and 25 mm higher to the rider.The installation time is less than half an hour. All cables are long enough.This achieves a natural ergonomics for a healthier sitting position. This item has been mounted and tested on original motorcycles - without any modifications.

Adjustable Handlebar Slider for BMW R1200RT LC and R1250RT LCincluding ABE At the request of many customers, we have now designed an adjustable handlebar slider for the BMW R1200RT LC and the R1250RT LC, which is based on a new steering head plate.Since the original design does not allow the handlebars to be brought significantly closer, we were forced to manufacture a new steering head plate.Our principle, which we have been following for 20 years, is the adjustability of the seating position. We have achieved this with the new handlebar slider.Only by manufacturing a new steering head plate is it possible to bring the handlebars as desired a total of 65 mm closer and not just higher.In the resting position, the handlebar slider is 31 mm closer to the rider than the original. From this point, the motorcycle handlebars can now be adjusted towards the rider in three stages using an index pin, bringing the handlebars up to 65 mm closer than the original. The handlebars will also be 100 mm wider.This allows you to adjust the super tourer according to your tour, body size, and comfort. The combination with our flexibly adjustable footrests completes the package and contributes to an absolutely relaxed riding experience.You achieve a natural ergonomics for a pleasant, upright seating position. This was one of our most elaborate projects, which we are particularly proud of.Please note, the conversion takes approximately 4 hours. All items were mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Adapter for BMW K1300GTThe finishing touch to comfort, with a discreet appearance - the original handlebar remains intact.Includes ABEWe have also developed a handlebar adapter for the BMW K1300GT, ensuring significantly more relaxed riding.The silver-coated handlebar adapters raise the handlebar by 30 mm and bring it 25 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.The M8 clamping hole has been equipped by us in the adjustment range with a wear-resistant, hardened, and galvanized steel threaded insert M8.You will now ride in a significantly more relaxed sitting position and no longer sit so upright on the tank.No modification of the brake line is necessary for this conversion. The installation is done without disassembly/bleeding of the brake line.The remaining tension that may still be in the body can also come from the slightly too high footpeg. Our footpeg adapters are a good solution for this.With both components together, you achieve the optimal sitting position.   All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

The handlebar adapter brings the handlebar of the BMW F800S 50 mm closer to the rider while maintaining the sporty look.This achieves a natural ergonomics for a healthier sitting position.Includes ABEDuring the conversion, a extension adapter must be attached to the brake line, and the brake must be bled afterwards.This can only be performed by a workshop!All other cables and lines fit.To ensure you can make the required fixing hole without any issues, we have created a drilling template that prevents the drill from wandering. All items have been mounted and tested on original motorcycles - without any modifications.

Handlebar Conversion K1200RS - in 50 mmincluding ABE For those who find the BMW Adapter a bit too short, there is the "small" 33 mm long Adapter for additional mounting.The adapters are available in various lengths, bringing the handlebar 33 mm, 50 mm, and 80 mm closer to the rider and 20 mm higher (see similar items).This achieves a natural ergonomics for a healthier sitting position.No longer brake line is required for the 50 mm adapter.If the high windshield is installed, the 50 mm adapters below will also fit.The 80 mm adapters will be delivered in black anodized finish, contrary to the photo. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Adapter for the BMW R1150RS incl. ABE With the 50 mm handlebar extension, you achieve the optimum comfort for your motorcycle without sacrificing sportiness. This provides a natural ergonomics for a healthier sitting position. The extension is available in black anodized finish, specifically for the BMW R1150RS. A longer brake line is required for the R1150RS, which is included in the set. All items have been mounted and tested on original motorcycles - without any modifications.

Handlebar Conversion K1200RS - optionally in 80 mm.including ABEFor the 80 mm conversion, a longer brake line is required. The brake line is included in the offer.Handlebar conversion BMW K1200RS in conjunction with BMW comfort adapter.The adapters are available in different lengths, bringing the handlebar 33 mm, 50 mm, and 80 mm closer to the rider and 20 mm higher (see similar items).This achieves a natural ergonomics for a healthier sitting position.The 80 mm adapters are delivered in black or silver anodized. Please choose a color! All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Handlebar Adapter for BMW K1200GT from 2006 onwardsThe finishing touch to comfort, with a discreet appearance - the original handlebar remains intact.Includes ABEWe have also developed a handlebar adapter for the BMW K1200GT-06 and K1300GT, ensuring significantly more relaxed riding.The silver-coated handlebar adapters raise the handlebar by 30 mm and bring it 25 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.The M8 clamping hole has been equipped by us in the adjustment range with a wear-resistant, hardened, and galvanized steel threaded insert M8.You will now ride in a significantly more relaxed sitting position and no longer sit so upright on the tank.No modification of the brake line is necessary for this conversion. The installation is done without disassembly/bleeding of the brake line.The remaining tension that may still be in the body can also come from the slightly too high footpeg. Our footpeg adapters are a good solution for this.With both components together, you achieve the optimal sitting position. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Aesthetically pleasing handlebar risers for the BMW S1000XRincluding ABE Fits only models without vibration dampers!We have also developed a handlebar adapter for the BMW S1000XR, which significantly enhances riding comfort.With our aesthetically pleasing handlebar riser adapter, we raise the handlebar by 30 mm and bring it 40 mm closer to the rider. This is important as it allows for a more natural position, relieving the upper body and arms considerably.This achieves a natural ergonomics for a healthier sitting position.The set includes an adapter for rerouting the brake line.The adapters are discreet and anodized in silver to match the original. This item has been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Conversion K1200RS - 33 mmincluding ABE Handlebar conversion BMW K1200RS in conjunction with BMW Comfort Adapter.For those who find the BMW Adapter still a bit too short, there is the "small" 33 mm long Adapter for additional mounting.The adapters are available in various lengths, bringing the handlebar 33 mm, 50 mm, and 80 mm closer to the rider and 20 mm higher (see similar items).This achieves a natural ergonomics for a healthier sitting position.Note on the comfort handlebar: Only the 33 mm adapters fit on the comfort handlebar. All other lengths will hit the windshield.The 80 mm adapters will be delivered in black anodized finish, contrary to the photo. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Handlebar Adapter R1200GS Year 2007Stylish handlebar closerincluding ABEA sporty motorcycle like the BMW R1200GS Year 2007 gains advantages with the tube handlebar adapter - this ensures significantly more relaxed riding.Handlebar adapter 40 mm higher and 40 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.No modification of the brake hose is necessary for this conversion.Installation is done without disassembly/bleeding of the brake hose. It only needs to be rerouted.Not suitable for the Adventure with additional lights, as the screws do not fit. All MV products have been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Adapter for BMW F800GS from 2012 onwardsincluding ABE The handlebar adapter for the 28mm handlebar improves your sitting position by an optimal 50 mm. The handlebar comes 50 mm higher and closer to the rider. This allows you to achieve a natural ergonomics for a healthier sitting position.You will clearly feel this advantage. No more tense, outstretched arms. You simply sit comfortably on your motorcycle. The conversion is quick and easy to implement: Remove the existing handlebar clamps - please ensure that the reservoirs for brake and clutch fluid do not tip over too much! - and insert the lower part of the handlebar adapter. A brake line extension is screwed onto the brake line. For models up to and including 2011, it is a bracket for the brake line distributor, and from 2012 onwards, it is a line. Now just place the handlebar in the new mounts and secure it with the original handlebar clamps. All necessary screws and accessories are included with the conversion.In general, it is sufficient for your BMW F800GS to route the cables and lines behind the fork bridge. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Long-distance comfort and perfect handling in pure form. Our handlebar riser with offset not only raises the handlebar by approximately 35 millimeters but also brings it 20 millimeters closer to the rider. This noticeably improves ergonomics, seating position, and handling of the machine. With the handlebar moved back, the arms are no longer pulled "forward." You sit significantly more upright and relaxed.

Handlebar riser and handlebar adapter with offset for BMW R1200RS LC and R1250RS LCincluding ABEOur cleverly and elaborately machined handlebar adapters and handlebar risers with offsetnot only raise the handlebar 20 mm higher, but - which is particularly advantageous - also bring it 35 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.The conversion time is only about 10 minutes. The original navigation screws from BMW are still used.All cables are long enough for your BMW R1200RS LC and R1250RS LC.However, the clutch line needs to be rerouted. It is removed at the clutch reservoir without any fluid leaking out. Then pull the line out from below and reroute it back up and reattach it.There is a slightly hidden cable tie in the lower area that also needs to be removed.The adapters are anodized to match the original.All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Riser for the BMW S1000XRincluding ABE As a preliminary step towards an improved seating position, we offer this relatively affordable solution for your BMW S1000R, which raises the handlebar by 28 mm and brings it 10 mm closer.This allows you to achieve a more upright seating position, better ergonomics, and brings the handlebar closer and higher.However, if you need more comfort, you should opt for the significantly more relaxed version (1008-901446). All items have been mounted and tested on original motorcycles - without any modifications.

Handlebar Weights with Clock for BMW R1800cc We have also developed the handlebar weight with clock in various designs for the BMW R18. With the waterproof quartz clock, you always have the time in view. Additionally, the handlebar gains more weight at the end and becomes wider. We offer the handlebar weights in black anodized and polished. The clocks are available in silver and black. The price is for a pair. Please select the desired version when placing your order.

Handlebar Weights with Clock for BMW R nineT, Scrambler, Urban, and Racer, PairTo see the clock while riding the BMW R nineT, you need to press a button until it appears on the display. We find this not to be safety-relevant given today's traffic flow.With the waterproof quartz clock integrated into the handlebar weight, you always have it directly in view.Additionally, the handlebar gains more weight at the end and becomes wider.The handlebar weights are available in silver and black anodized, as well as polished. The clocks are offered in silver and black.Please select your desired version when placing your order.The handlebar weights fit all R nineT models, including Pure, Scrambler, and Urban but also other motorcycles. They are secured with an M12 screw.Upon customer request, we can also manufacture them with an M6, M8, or M10 thread, so they will fit other BMWs and other motorcycles as well.Design protected.All items have been mounted and tested on original motorcycles - without any modifications.

Angeboten wird hier ein Gebrauchtteil Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, AbschürfungenTeilenummer: 32718563803 Fahrzeug: K80 F750GS / F800GSK81 F850GS / F900GS / F900GS SFK82 F850GS Adventure / F900GS AdventureK84 F900XR / F900XR A2

Handschutz links für BMW R1300GS + R1300GS Adventure Angeboten wird hier ein GebrauchtteilFahrzeug: R1300GS, R1300GS Adventure,  Hersteller: BMWNeupreis: 42,38 € Zustand: deutliche Gebrauchsspuren, Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46635B497E3

Handschutz Protektor links gelb für BMW R1250GS + Adventure, RnineT Urban G/S Angeboten wird hier ein NeuteilFahrzeug: R1250GS, R1250GS Adventure, RnineT Urban G/S Hersteller: BMWNeupreis: 42,38 € Zustand: neuwertig mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 46631541783

Handschutz Protektor rechts gelb für BMW R1250GS + Adventure, RnineT Urban G/S Angeboten wird hier ein NeuteilFahrzeug: R1250GS, R1250GS Adventure, RnineT Urban G/S Hersteller: BMWNeupreis: 42,38 € Zustand: neuwertig mit Lagerspuren Beschreibung: wird verkauft wie abgebildetTeilenummer: 46631541784

HATTECH Header Set 38mm WITHOUT Cross Pipe / Interference Pipe For BMW R80 / 100R/GS and Mystic Fits without gasket on original pre-silencer or directly on Hattech Y-pipes suitable for models WITH and WITHOUT oil cooler no further modifications necessary WITHOUT interference pipe Available in various surface finishes