The carbon battery cover for the BMW K 1200/1300 S models replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part is manufactured entirely from prepreg (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, is coated with a clear plastic layer for protection against environmental influences.This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically,it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

JMP starter brushes for Japanese motorcycles. As original spare parts, starter brushes are usually onlydelivered completely mounted on a base plate and aretherefore very expensive. 12.0 x 8.9 x 5.9 mm

The carbon clutch cover for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / BMW K 1200 R Sport (2007-2011) / K 1300 S (2008-present) / K 1300 R (2008-present) significantly emphasizes the sporty and dynamic character of the motorcycle. This product replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part is made entirely from prepreg material (see FAQ) according to the latest guidelines in an autoclave, and in the next step, as is customary for us, it is coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also enhances the three-dimensional effect of the carbon structure.

To make the vehicle airier and lighter, the original air filter box must be removed. Alternatively, either open filters or open intake funnels are directly screwed onto the carburetors, and the original plate air filter along with the intake snorkels make way for this custom and precisely fitting cover made of high-quality real carbon – this is how a true boxer should look. Cover with hole for K&N engine ventilation. For models with plate air filter from model year 09|80.

 To make the vehicle airier and lighter, the original air filter box must be removed. Alternatively, either open filters or open intake funnels are directly screwed onto the carburetors, and the original plate air filter along with the intake snorkels make way for this custom and precisely fitting cover made of high-quality real carbon – this is how a true boxer should look. Cover without drilling for K&N engine ventilation. For models with plate air filter from model year 09|80.

The exhaust end caps (2-piece) in carbon for the BMW R NineT Scrambler replace the original component using the original mounting points.Our exhaust end caps weigh only about 40g. For these thermally highly stressed carbon parts, we use special high-temperature prepreg material (see FAQ) to avoid discoloration and yellowing. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and higher stiffness.The carbon part was completely manufactured from prepreg (see FAQ) material in an autoclave according to the latest guidelines and, as is customary for us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only technically does the coating excel, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The right heel guard in carbon for the BMW R 1250 GS replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness.The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. Corresponds to BMW part number: 46 71 8 554 072

The left frame cover for the HP4 RACE, the premium racer from BMW, is handcrafted in a limited series of 750 pieces!The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part is made entirely from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, is coated with a clear plastic layer for protection against environmental influences in the next step.

The front fender in our unique design for the BMW K 1600 GT, K 1200 GT, and K 1300 GT (2006-2011) integrates perfectly into the overall look of the motorcycle. This product replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary with us, coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The alternator cover, extra thick version for long-distance use in carbon for the BMW S 1000 RR Stocksport/Racing (2010-present) is partially screwed in with the alternator cover screws and additionally glued at the front area with a small dot on the alternator cover. This product enhances the vehicle and provides additional protection against damage. The installation of the parts is done using the included adhesive strips and/or the use of original mounting points. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Our carbon handguards for the BMW F 800 GS Adventure (2013-present) / R 1200 GS (LC) (2013-present) / R 1200 GS Adventure (LC) (2013-present) offer significantly increased protection against cold and rain. Thanks to a cleverly chosen design, the handguards do not appear significantly larger than the original part and integrate perfectly into the overall look of the R 1200 GS. The carbon handguards for the BMW F 800 GS Adventure (2013-present) / R 1200 GS (LC) (2013-present) / R 1200 GS Adventure (LC) (2013-present) replace the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part is manufactured according to the latest guidelines in an autoclave entirely from prepreg (see FAQ) material and, as is customary for us, is coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. Not only does the coating excel technically, but it also emphasizes the three-dimensional effect of the carbon structure.

Our carbon handguards for the BMW R 1250 GS provide significantly increased protection against cold and rainwater. Thanks to a cleverly chosen design, the handguards do not appear significantly larger than the original part and integrate excellently into the overall look of the R 1250 GS. The carbon handguards for the BMW R 1250 GS replace the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness.The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic coating for protection against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. Corresponds to BMW part number: 46 63 8 523 432

The fairing covers for the lights in carbon for the BMW K 1300 S enhance the vehicle and provide additional protection against damage. The installation of the parts is done using the included adhesive strips and/or the use of original mounting points. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary with us, has been coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The single-seat carbon seat for the BMW S 1000 RR is easy to install and transforms the two-seater into a single-seater in just a few minutes. The design of the solo seat seamlessly integrates into the groundbreaking appearance of the S 1000 RR. This product replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part has been completely manufactured in an autoclave according to the latest guidelines from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The side covers under the seat for the BMW F 800 R (2012-2015) / S (2006-current) / ST (2006-current) / GT (2012-current) in carbon are shaped to cover as much of the original tank, which is made of black plastic, as possible. This product enhances the vehicle and provides additional protection against damage. The installation of the parts is done using the included adhesive strips and/or by utilizing the original mounting points. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. Not only does the coating excel technically, but it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The splash guard on the license plate holder in carbon for the BMW S 1000 XR replaces the original component using the original mounting points. This component can be used with both our license plate holder 1004-NHO.007.S10XR.K and the original license plate holder. The focus is on the great appearance, weight savings (typically a reduction of about 70% compared to the original component), and increased stiffness.The carbon part has been completely manufactured according to the latest guidelines in an autoclave from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon timing belt drive cover for the BMW F 800 R (2009-2015) / S (2006-current) / ST (2006-current) / GT (2012-current) replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary with us, coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon tail light cover for the BMW K 1200 R (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 R (2008-present) significantly emphasizes the sporty and dynamic character of the motorcycle. This product replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary for us, coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also enhances the three-dimensional effect of the carbon structure.

The fairing component in carbon for the BMW K 1200 S replaces the original part using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary for us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Carburetor diaphragm for Bing constant pressure carburetor 40mm throttle

Carburetor diaphragm for Bing constant pressure carburetor   32mm throttle

Bolt

Choke return spring for 32mm carburetor

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver