Intake Valve   - 34mm - 7mm Stem   Valves of top quality. The valve is hard chrome plated on the stems and hardened at the stem ends.Technical Data:Head Diameter:   33.9 mmTotal Length:   103 mmStem Diameter:   7 mm

Nut for Rear Swingarm   Attention: 4 pieces are required!   Dimensions: - Outer: 16mm - Inner: 8.5mm - Height: 10mm  

Neutral switch for BMW R 2-valve M12 x 1.5    

Original BMW spare parts for mounting the windshield on the R60/S R90/S R100/S

Vehicle-Specific Information:  belowOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Fehling Touring Handlebar Type: LN 22   - made of chrome-plated steel tube - tube diameter 22 mm (7/8") - without cable drilling - with TÜV certificate   - compatible with BMW R 80 G/S, R 80 RT/ST, R 100 RT   Fehling has been manufacturing accessories for motorcycles and large scooters since the 1950s. From development to production, top quality according to ISO 9001 and Made in Germany.   Dimensions: a: 710 mm b: 200 mm c: 135 mm d: 260 mm e: 180 mm Technical Data:Diameter:   22.2 mm (7/8 inch) Type:   Touring Material:   Steel Width:   710 mmColor:   chrome Special Feature:   no special feature Manufacturer:   Fehling

BMW R nineT Knee Pad Set Black Product Description Ergonomically shaped rubber pads on the right and left sides of the tank Stylish design element in heritage look Prevents scratching of the tank Self-adhesive, precise positioning with the help of a template Color: Black

Der sportliche Slip-on-Schalldämpfer aus Titan mit Carbon-Endkappe verleiht dem Scrambler ein besonders dynamisches Erscheinungsbild und einen kernigen Sound. Slip-on-Schalldämpfer für kernigen Sound und Gewichtsreduzierung in exklusivem Design Hoher Individualisierungseffekt mit eigenständiger Optik Langes Verbindungsrohr mit 2 Carbon-Hitzeschutzblenden Gewicht (inklusive Verbindungsrohr): 2,2 kg, Gewichtreduzierung gegenüber Serie ca. 2,6 kg Drehmoment und Leistung auf Serienniveau Akrapovič Schriftzug auf Seitenfläche gelasert Nur für Solobetrieb Optional: Abdeckung für Hauptrahmenverschraubung Schalldämpfer komplett aus Titan (Mantel, Verbindungsrohr und Innenaufbau); Endkappe aus Carbon Verbindungsrohr lang : sehr hoher Individualisierungseffekt mit eigenständiger Optik, inklusive 2 Carbon-Hitzeschutzblenden für Verbindungsrohr Inklusive Verbindungsrohr lang und Halteblech !   BMW Teilenummer : 77118564693 Passt laut Teilenummer an folgende Fahrzeuge : K21 R nineT ab 2016 K22 R nineT Pure ab 2016 K23 R nieT Scrambler ab 2016 K32 R nineT Racer ab 2016 K33 R nineT Urban G/S ab 2016

Cylinder Head Cover 2V-Style Right Unique appearance – the Cylinder Head Cover 2V-Style in retro design gives the boxer engine a distinctive look that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg Silver with a cast appearance made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design with a cast appearance. Color: Nürburg Silver. Delivery includes: One cylinder head cover including spark plug well cover and small parts.

BMW R nineT Valve Cover Set Cylinder Head Cover 2V Original BMW Accessories Can be easily replaced with the original valve covers. Kit for right and left. All mounting parts are included in the kit. Unique look – the 2V-style cylinder head cover in retro design gives the boxer engine a very individual appearance that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg silver with a cast look made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design in cast look. Color: Nürburg silver. Delivery includes: One cylinder head cover including spark plug shaft cover and small parts. R nineT R nineT Pure R nineT Urban G/S R nineT Scrambler R nineT Racer

BMW R NINET Set knee pad black item Description Ergonomically shaped rubber pads on the right and left side of the tank Stylish design element in the Heritage look Prevents scratching of the tank Self-adhesive, accurate positioning using template Color: Black

Adjustable Footpeg Lowering Kit for BMW R100GS 92With the new footpeg adapter, no wish remains unfulfilled. We would like to point out that you can only install the adapters if you perform the drilling for the spring position on your peg yourself. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for 40 mm lowering. It is adjustable in increments of 4°. Generally, the basic adapter can be mounted upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position. The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.Please consider that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained.Includes parts certificate TÜV certificate (attached here).The parts certificate includes most motorcycle models. For motorcycles not listed there, an individual inspection can be conducted. The proper installation will be checked and confirmed. The inspection costs approximately €30.00. All items have been mounted and tested on original motorcycles - without any modifications.

Vehicle-Specific Information:  Attention: The oil viscosity is 7.5W.Progressively wound fork springs from YSS, designed to be stiffer than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   600 mmDiameter 1:   33 mmSpring Rate 1:   5 N/mmSpring Rate 2:   8 N/mmAir Chamber Left:   160 mmAir Chamber Right:   160 mmManufacturer:   YSS

Progressively wound fork springs from YSS in a firmer design than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type: Progressive Length: 545 mmDiameter 1: 26.5 mmSpring Rate 1: 5.5 N/mmSpring Rate 2: 7 N/mmAir Chamber Left: 150 mmAir Chamber Right: 150 mmRecommended Viscosity: 10W Manufacturer: YSS

BMW Original Rear Brake Disc NEW Item Description This offer includes 1 rear brake disc . This offer applies to the item in the red marked circle!!! ( Image No. 1 ) BMW Part Number: 34212314151 Fits according to part number for the following vehicles: R 1100 GS 94 R 850 GS 95 R 1150 GS 00 R 1150 GS Adventure 01 R 1100 R 94 R 850 R 94 R 1100 RT 96 R 850 RT 96 R 1150 R 01 R 1150 R Rockster R 850 R 02 R 1150 RS 01 R 1150 RT 00 R 850 RT 02 R 1100 S 98

Adjustable Footpeg Lowering Kit for BMW R850-1100Rincluding ABEWith the new footpeg adapter, no wish remains unfulfilled. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for 40 mm lowering. It can be adjusted in increments of 4°. Generally, the basic adapter can be mounted either upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position. The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant. The adapters come with a compensating adapter for the brake side. MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters. If needed, you can order a brake lever or a shift lever cap for your BMW. The brake lever cap does not fit the GS models and the F800R. Please note that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

The mirror glass has a reducing effectTechnical Data:Usage:   Vehicle-specific Mirror Type:   Stem mirror Mounting:   Clamp Mirror Head Shape:   Round Mirror Head Diameter:   120 mmMounting Side:   Left Total Width:   180 mmColor:   Black Material:   Plastic With Indicator:   No E-tested:   Yes

Used part, noticeable signs of wear, scratches and abrasions, rust, see additional pictures BMW part number: 32712325588

Used part, noticeable signs of wear, see additional pictures

Often, it's the little things that make the difference! This is also true for the Touratech handlebar riser for the BMW R1250GS/R1200GS.The 25 mm rise of the handlebars results in a more upright, significantly relaxed seating position. The adjustment range of the handlebar tilt is increased, which further enhances comfort.Riding while standing becomes less strenuous with the Touratech handlebar riser, providing enormous advantages, especially for taller riders.Overall, this leads to a noticeable increase in stamina and concentration. Long highway stretches lose their intimidation, and even fast and challenging sections off-road become easier to handle.The simple installation can be completed in just a few minutes. No longer cables or brake lines are necessary!Material: silver anodized aluminum

BMW R1200 GS + Adv. LC handlebar riser 40mm Type 39 Handlebar adapter for R 1200 GS LC from 2013 + Adventure from 2014  Often it is the little things that decide! So also with the Touratech handlebar risers for BMW R1200GS.Die increase of the handlebar by 40 mm causes a more upright, significantly relaxed sitting position. The adjustment of the inclination of the handlebar is increased, which again the comfort erhöht.Auch driving while standing is less stressful with the Touratech handlebar riser, which bringt.Insgesamt especially for taller drivers enormous advantages is achieved by a noticeable increase in fitness and concentration. Long stretches of motorway lose their fear and the terrain itself fast and difficult passages are easier to master.  The simple installation is done in a few minutes. Longer cables or brake cables are not necessary material: silver anodized aluminum

BMW R1200 GS R RS RT LS K50 Sliding Protection for Valve Cover Protection Plastic sliding protection for original BMW stainless steel valve cover protection 1 set = R + L Replacement for the original sliders.

BMW R1200 GS R RT RS LC original rear brake disc Part number 34218526568 K50 K51 K52 K53 K54 Original BMW spare part

for R1200GS from 2013/ BMW R1200GS Adventure from 2014/ BMW R nineT/ BMW R1200RT from 2014/ BMW R1200R from 2015/ BMW R1200RSJust a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping in-easy removal for maintenance work-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: blackAlso fits the BMW RnineT (not Scrambler)!