Original BMW Spare Part Part Number: 21217702595 According to the part number, it fits the following vehicles:

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles:

JMP Bolt Valve Cap With these pretty little tire valve covers, dirt stays out and an airtight seal is ensured. Universally suitable for cars and motorcycles.   Material: Anodized aluminum in color

JMP Professional Adhesive Weight Remover   Ideal for removing adhesive weights, protective strips, labels, adhesive and type plates Solvent resistant Can be sharpened with a file No damage to surfaces Blade width 38 mm            

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.    

Exhaust Valve   - 32mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.Technical Data:Head Diameter:   31.9 mmTotal Length:   86.8 mmStem Diameter:   7 mm

Intake Valve   - 34mm - 7mm Stem   Valves of top quality. The valve is hard chrome plated on the stems and hardened at the stem ends.Technical Data:Head Diameter:   34.00 mmTotal Length:   87.00 mmStem Diameter:   7.00 mm

Vehicle-Specific Information: Attention only suitable until model year 09/1974Ignition Light Switch BMW   Original spare part   Key cannot be removed when the parking light is on. This prevents the motorcycle from being accidentally left with the lights on, and the battery will not be drained.  

Starter Cover   Original Spare Part High-performance cover made of plastic, which can replace the starter and/or air filter cover on any air-cooled twin.Ideal for Cafe Racers, Bobbers, and other custom bikes.   Since the cover does not include an air filter and does not have connections for the air intake channels of the carburetors, it is perfectly suited for custom bikes, with direct mounting on the carburetors.

Warning Blink Relay Bosch

BMW Original Spare Part Air Filter Insert Top Brand Quality

Vehicle-Specific Information: for ATE CaliperEBC Standard Semi-Sintered Metal Brake Pads (V-Series)   The EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are organic aramid brake pads with a 30% copper content, designed for cruisers, big twins, and touring bikes. These pads are 6 times stronger than steel and are completely asbestos-free. The medium to high friction coefficient ensures strong braking power over a wide temperature range. The high braking force results in minimal wear on both the brake pad and the brake disc. EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are TÜV certified and come with an ABE!

Intake Valve   - 34mm - 7mm Stem   Valves of top quality. The valve is hard chrome plated on the stems and hardened at the stem ends.Technical Data:Head Diameter:   33.9 mmTotal Length:   103 mmStem Diameter:   7 mm

Nut for Rear Swingarm   Attention: 4 pieces are required!   Dimensions: - Outer: 16mm - Inner: 8.5mm - Height: 10mm  

Neutral switch for BMW R 2-valve M12 x 1.5    

Original BMW spare parts for mounting the windshield on the R60/S R90/S R100/S

Valve Cone Piece   - For all BMW R2V models (except R45, R65)

Vehicle-Specific Information:  belowOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Fehling Touring Handlebar Type: LN 22   - made of chrome-plated steel tube - tube diameter 22 mm (7/8") - without cable drilling - with TÜV certificate   - compatible with BMW R 80 G/S, R 80 RT/ST, R 100 RT   Fehling has been manufacturing accessories for motorcycles and large scooters since the 1950s. From development to production, top quality according to ISO 9001 and Made in Germany.   Dimensions: a: 710 mm b: 200 mm c: 135 mm d: 260 mm e: 180 mm Technical Data:Diameter:   22.2 mm (7/8 inch) Type:   Touring Material:   Steel Width:   710 mmColor:   chrome Special Feature:   no special feature Manufacturer:   Fehling

BMW R nineT Knee Pad Set Black Product Description Ergonomically shaped rubber pads on the right and left sides of the tank Stylish design element in heritage look Prevents scratching of the tank Self-adhesive, precise positioning with the help of a template Color: Black

Der sportliche Slip-on-Schalldämpfer aus Titan mit Carbon-Endkappe verleiht dem Scrambler ein besonders dynamisches Erscheinungsbild und einen kernigen Sound. Slip-on-Schalldämpfer für kernigen Sound und Gewichtsreduzierung in exklusivem Design Hoher Individualisierungseffekt mit eigenständiger Optik Langes Verbindungsrohr mit 2 Carbon-Hitzeschutzblenden Gewicht (inklusive Verbindungsrohr): 2,2 kg, Gewichtreduzierung gegenüber Serie ca. 2,6 kg Drehmoment und Leistung auf Serienniveau Akrapovič Schriftzug auf Seitenfläche gelasert Nur für Solobetrieb Optional: Abdeckung für Hauptrahmenverschraubung Schalldämpfer komplett aus Titan (Mantel, Verbindungsrohr und Innenaufbau); Endkappe aus Carbon Verbindungsrohr lang : sehr hoher Individualisierungseffekt mit eigenständiger Optik, inklusive 2 Carbon-Hitzeschutzblenden für Verbindungsrohr Inklusive Verbindungsrohr lang und Halteblech !   BMW Teilenummer : 77118564693 Passt laut Teilenummer an folgende Fahrzeuge : K21 R nineT ab 2016 K22 R nineT Pure ab 2016 K23 R nieT Scrambler ab 2016 K32 R nineT Racer ab 2016 K33 R nineT Urban G/S ab 2016

Cylinder Head Cover 2V-Style Right Unique appearance – the Cylinder Head Cover 2V-Style in retro design gives the boxer engine a distinctive look that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg Silver with a cast appearance made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design with a cast appearance. Color: Nürburg Silver. Delivery includes: One cylinder head cover including spark plug well cover and small parts.

BMW R nineT Valve Cover Set Cylinder Head Cover 2V Original BMW Accessories Can be easily replaced with the original valve covers. Kit for right and left. All mounting parts are included in the kit. Unique look – the 2V-style cylinder head cover in retro design gives the boxer engine a very individual appearance that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg silver with a cast look made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design in cast look. Color: Nürburg silver. Delivery includes: One cylinder head cover including spark plug shaft cover and small parts. R nineT R nineT Pure R nineT Urban G/S R nineT Scrambler R nineT Racer

BMW R NINET Set knee pad black item Description Ergonomically shaped rubber pads on the right and left side of the tank Stylish design element in the Heritage look Prevents scratching of the tank Self-adhesive, accurate positioning using template Color: Black