The Touratech EVO X luggage rack made of stainless steel for the R1250GS/R1200GS is a sturdy luggage rack for the Touratech ZEGA EVO X cases. The perfect luggage system for long journeys.It not only visually matches the frame of the GS but is also a non-corrosive system made from 18 mm stainless steel tubing, ensuring particularly high stability even off the beaten path.Typical for the EVO X special system is the cutout on the right case, allowing it to snugly fit around the exhaust. The cases are positioned closer to the center of the vehicle, reducing the overall width and giving the system a more harmonious appearance due to the symmetrical case lids.Practical benefits and user-friendliness:The ZEGA Evo offers even easier attachment while maintaining absolute stability - even in tough off-road conditions! It combines optimal ergonomics and absolute comfort without compromising reliability.The case as part of the luggage system:The ZEGA Evo X, like all cases from Touratech, was not developed as an isolated product but is designed from the outset as part of a luggage system. The outstanding practical benefits result from the unique combination of a beautifully designed yet indestructible case, a brilliant mounting mechanism, and a rugged carrier made from 18 mm thick stainless steel tubes.Stainless steel luggage rack special system for ZEGA Evo X- made from 18x2 mm stainless steel tubing- also suitable for tough off-road use- no restriction for the passenger- fits elegantly into the overall look of the BMW R1250GS/R1200GS- easy assembly / disassemblyThe installation is done at existing mounting points. With just a few screws, the very robust construction is securely mounted or dismounted for off-road use. The mounting brackets remain unobtrusively on the motorcycle.Scope of delivery:1 x luggage rack with mounting materialsYou will need 1x ZEGA Evo case and 1x ZEGA Evo X case.Order together with: Exhaust extension for original exhaust 01-045-5597-0 (not included in the delivery.)

The luggage rack is made of robust 18 mm stainless steel tubing. It is mounted using special holding clamps on the frame tail and existing mounting points. Very sturdy construction with a cross brace that can withstand tough off-road use while still fitting elegantly into the overall look of the BMW R1200GS. It is, of course, also compatible with our side covers for the R1200GS with article numbers 01-040-2691-0 or 01-040-2692-0.The delivery includes the left rack, right rack, cross brace, frame reinforcement, and mounting materials.Weight: approx. 4.1 kgDimensions: total width when mounted approx. 490 mm (packaging dimensions approx. 600 mm x 320 mm x 220 mm)

Protects the starter from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

Protects the starter from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

This sun visor is specifically designed for the BMW R1300GS. It improves the readability of the display in extreme lighting conditions.The precisely fitting and easy-to-install sun visor is made of black anodized aluminum and features a 25mm long glare shield.The simultaneous use of Touratech navigation device holders is not restricted.

We have designed this deactivation plug for the case that you want to install a Touratech Suspension Extreme chassis in your BMW R1200GS (LC) with DDC chassis In order to avoid error messages on the display regarding the DDC system (Dynamic Damping Control) when switching to the Touratech Suspension Extreme chassis, this "optional" deactivation plug is inserted into the socket of the shock absorber and mounted on the motorcycle. This also ensures that the riding modes: - ASC, ABS, and DTC continue to function perfectly.Important Summary:- Only the standard DDC damping adjustment is deactivated.- One deactivation plug is required per shock absorber.- The BMW riding modes: - ASC, ABS, and DTC continue to function perfectly.- ASC (Automatic Stability Control); ABS (Anti-lock Braking System); DTC (Traction Control)- Prevents an error message in the BMW vehicle display.- Function of the BMW control unit remains fully intact.- High-quality components with matching connectors- The original motorcycle electronics remain intact.- A reversion to DDC is easily possible.Scope of delivery:- 1 piece Touratech Suspension deactivation plug- Including connection cable and matching connector.- Including mounting materials and installation instructionsTIP: We also offer a Touratech Suspension DDA Plug & Travel chassis. In this case, "all" functions and switches on the motorcycle continue to be used.Do you have further questions? We are happy to advise you personally, please contact us

Feiere mit Touratech das 35-jährige Jubiläum und erlebe die limitierte „35 ANNIVERSARY EDITION“ der Touratech Extreme2 Fahrwerke – entwickelt für maximale Performance in den härtesten Offroad-Bedingungen. Für alle, die ihr Motorrad bis an die Grenzen führen, sind diese Dämpfer das unverzichtbare Upgrade, das dir unter extremen Bedingungen volle Kontrolle verschafft. - Großer, fein abgestufter Einstellbereich für 100% individuelle Anpassung. - Verbesserter Durchschlagschutz durch optimierte PDS-Funktion. - Innovatives „low friction“-Kolbenband – Minimiert Reibung, maximiert Reaktionsgeschwindigkeit. Der neu entwickelte Dämpfer setzt neue Maßstäbe in Individualisierung und Benutzerfreundlichkeit. Mit einem erweiterten Einstellbereich lässt sich die Zug- und Druckstufe präzise und fein abgestuft anpassen, um das Fahrwerk exakt auf die individuellen Bedürfnisse abzustimmen. Dank der neuen elektronischen Federvorspannung im kompakten Design gestaltet sich die Installation schnell und unkompliziert – ganz ohne bislang übliche externe EPA-Pumpen. Robust, platzsparend und effizient optimiert sie das Fahrwerk, während die Pumpe den verfügbaren Platz unauffällig nutzt und die GS schlank sowie immer bereit für jedes Abenteuer bleibt. Mit einem 46 mm großen Dämpferkolben, ausgestattet mit einem „Low Friction“-Kolbenband, sorgt das System für ein äußerst direktes und sensibles Ansprechverhalten. Der Trennkolben enthält eine zusätzliche Führung, die das Gleiten reibungsarm unterstützt und somit das Ansprechverhalten weiter verbessert. Die weiterentwickelte Funktion des progressiven Dämpfungssystems (PDS) mit einem neu konstruierten Hydraulikstopp verhindert zuverlässig das Durchschlagen, selbst in extremen Situationen. Ein vergrößertes, zweiteiliges Reservoir sorgt für mehr Ölvolumen und eine maximierte Kühlfläche, was eine effektive Wärmeableitung ermöglicht und die konstante Dämpferleistung auch bei extremen Belastungen garantiert. Verschiedene Einstellmöglichkeiten machen die „Limited Edition“ Federelemente zu einem flexiblen System. Während die Zugstufendämpfung am Federbeinfuß eingestellt wird, lässt sich die doppelte Druckstufeneinstellung am Ausgleichsbehälter über einen besonders weiten Einstellbereich präzise anpassen. Der Low- und High-Speed-Bereich lässt sich zudem besonders einfach durch unterschiedlich farblich gekennzeichnete Einsteller justieren. Für Fahrzeuge mit elektronischem DDA-Fahrwerk enthält das Tuning-Package passende Cancellation Plugs, die einfach auf die vorhandenen Stecker gesteckt werden und Fehlermeldungen im Cockpit verhindern. Wie alle Federelemente von Touratech Suspension sind auch die neuen „Limited Edition“ Federbeine voll servicefähig. Nach intensiven Fahrten oder Belastungen lassen sich die Dämpfer zerlegen und überholen, um eine konstante Performance und langfristigen Fahrspaß unter extremen Bedingungen sicherzustellen. Das hier verbaute Grund-Setup ist abgestimmt auf Fahrer bis 100 kg zuzüglich Reisegepäck. Anpassungen bei sehr viel höheren Zuladungen oder anderen außergewöhnlichen Anforderungen sind möglich. Das Federbein wird dann von uns individuell an Ihre Bedürfnisse angepasst. Lieferumfang: - 2x Limitierte „TOURATECH SUSPENSION 35 ANNIVERSARY EDITION“ Aufkleber - Einbaufertiger Touratech Suspension Stoßdämpfer für vorne - Einbaufertiger Touratech Suspension Stoßdämpfer für hinten - Cancellation Plugs -Stecker Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns.

Lowering Replacement Springs by -20mm for BMW R 1200 GS LC RALLYE ESA 2017 - 2018 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This shock absorber is perfect for reducing the seat height by -25mm for the BMW F850GS Adventure. At the same time, your BMW F850GS Adventure remains well-tuned and very suitable for touring. The shock absorber of type Level2 offers a large adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F850GS Adventure, suitable fork springs must be installed to compensate. The balance of the motorcycle can be easily and quickly restored by you using the handwheel via the hydraulic preload adjustment. The damping adjustment of this shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.Important points at a glance:=> The shock absorber is configured based on our experience for the BMW F850GS Adventure and is ready to ride.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.Scope of delivery: - Ready-to-install shock absorber.- ABE documents- Installation instructions / user manualNote:For the safe stand of your BMW F850GS Adventure after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.Do you have further questions? We are happy to advise you personally, please contact us.

Lowering Kit -25mm perfectly tuned to the shock absorbers of the BMW R1250GS Adventure with original factory lowering adjustment. With this spring set, you achieve a lowering of -25mm while maintaining relatively good riding characteristics; of course, some ground clearance is lost. The progressive springs are perfectly matched to the original shock absorbers of the BMW R1250GS Adventure. The suspension continues to offer good responsiveness and high safety in critical situations after the modification. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “BMW R1250GS Adventure from 2018-2022 with BMW Dynamic ESA and original factory lowering”   Our recommendation: Have the modification carried out by a professional workshop.   Scope of delivery: - Replacement spring -25mm front for original shock absorber with factory lowering. - Replacement spring -25mm rear for original shock absorber with factory lowering. - Installation instructions.   Info: Side stand and center stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally; please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.                          

This shock absorber is perfect for reducing the seat height by -30mm for the BMW F750GS. At the same time, your BMW F750GS remains well-tuned and very suitable for touring. The shock absorber of type Level2 offers a large adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F750GS, suitable fork springs must be installed for compensation. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment by you. The damping adjustment of this shock absorber allows for the necessary influence on the rebound and compression stages to implement your individual requirements for riding comfort.Important points at a glance:=> The shock absorber is configured based on our experiences for the BMW F750GS and is ready to ride.=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.A shock absorber with which you can easily and comfortably respond to different loading conditions of your motorcycle. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed form.Scope of delivery: - Ready-to-install shock absorber.- ABE documents- Installation instructions / user manualNote:For the safe stand of your BMW F750GS after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.Do you have further questions? We are happy to advise you personally, please contact us

Lowering Replacement Springs by -30mm for BMW R 1200 GS 2006 - 2012 The Touratech Suspension Lowering Kit. The set includes replacement springs for the shock absorber. With this spring set, you achieve a sensible lowering while maintaining good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly matched to your motorcycle. After the conversion, the suspension offers significantly improved responsiveness and higher safety in the limit range. By replacing the springs front and rear, the balance of your motorcycle is preserved. Scope of delivery: - Replacement spring for original front shock absorber - Replacement spring for original rear shock absorber - including installation instructions Our recommendation: Have the conversion carried out by a specialist workshop. Info: The side stand and main stand may need to be adjusted in length. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This shock absorber is perfect for reducing the seat height (-5cm) on the BMW F800GS. At the same time, your BMW F800 GS remains well-tuned and very suitable for touring. The Level1 type shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F800GS, suitable fork springs must be installed for compensation (see important notes shortly). The spring preload can be adjusted using a tool to accommodate the large travel luggage. The damping adjustment of this Level1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important notes: => The shock absorber is configured and ready to ride based on our experiences for the BMW F800GS. => Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. => The shock absorber mentioned here is designed for a rider weight of up to 100kg, including travel luggage. => For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. => The suitable component for the front of the BMW F800GS is: => Progressive fork springs, BMW F800GS *Lowering by 50mm* 01-040-7411-0 => When replacing only one component, no lowering of the motorcycle can be achieved. => IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps. *** This will severely impair the motorcycle's handling. Features of the Touratech Suspension Level1 shock absorber: => The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed. *** This leads to very low wear and a long lifespan of the shock absorber. => Stable stainless steel bushings are installed in the shock eye for the mounting screws. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads. => All components and parts are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech. *** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team. => Separation piston design. This allows the damping fluids oil and nitrogen to act separately. *** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle. => QR code on the shock absorber with individual shock absorber information. *** This allows for easy retrieval of shock-specific information by scanning with a smartphone. *** Always accessible information on the basic settings of the shock absorber. Reset possible in case of incorrect settings. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adapted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Note: BMW F800GS up to 2012 Do you have further questions? We are happy to advise you personally, please contact us.

This shock absorber is perfect for reducing the seat height (-5cm) for the BMW F800GS. At the same time, your BMW F800 GS remains well-tuned and very suitable for touring. The shock absorber of type Level2 offers a large adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F800GS, suitable fork springs must be installed for compensation. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic preload adjustment by you. The damping adjustment of this shock absorber allows for the necessary influence on the rebound and compression stages to implement your individual requirements for riding comfort at the shock absorber. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW F800GS from 2013 onwards.=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW F800GS is:=> Progressive fork springs, BMW F800GS from 2013 *Lowering by 50mm* 01-040-7438-0=> When replacing only one component, no lowering of the motorcycle can be achieved.=> IMPORTANT: We strongly advise against pushing the fork tubes through the fork clamps.*** This will severely impair the motorcycle's handling.Note:For the safe stand of your BMW F800GS after lowering, we recommend the shortened side stand and/or optionally the shortened center stand. You can obtain these components from your BMW dealer.Features of the Touratech Suspension Level 2 shock absorber:=> The shock absorber housing is made of aluminum. *** This results in minimal weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech race team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic high-end preload adjustment via a conveniently positioned hand wheel. => QR code on the shock absorber with individual shock absorber information.*** This allows easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect setting. The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustmentsfor higher rider weights (more than 100kg) and/or for predominantly passenger operation / with travel luggage arepossible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us

This shock absorber is perfect for reducing the seat height (-5cm) for the BMW R1200GS. The Touratech lowering kit in high-end quality is still optimally designed for touring and riding operations with frequently and significantly changing loading and riding conditions. From the rear bag to the loaded luggage system and/or passenger operation, any type of additional load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel via the hydraulic spring preload. The very finely adjustable damping at the reservoir allows for an effective, precise, and personalized suspension setting for any road condition and purpose at any time.Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW R1200GS.=> Parameters are: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW R1200GS is here:=> Touratech Suspension shock absorber *front* for BMW R1200GS *lowering* 01-044-5876-0=> When replacing only one component, no lowering of the motorcycle can be achieved.Note:For the safe stand of your BMW R1200GS after lowering, we recommend the shortened side stand and/or optionally the main stand from BMW. You can obtain these components from your BMW dealer. Features of the Touratech Suspension high-end shock absorber: => The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => All components and parts are designed for intensive use with heavy touring motorcycles. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings are installed in the shock absorber eye for the mounting screws. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** This results in a finer response of the shock absorber. *** This provides high, precise damping performance even at very high damping frequencies (bad road conditions). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic high-end spring preload via a conveniently positioned hand wheel. => The damping settings were developed based on the experiences and requirements of Touratech.=> The basis is many travel kilometers and the experiences from the operations of the Touratech race team.=> High-end compression damping adjustment is always separately adjustable in high speed and low speed.*** This allows for very individual adjustment of the compression/rebound stage. Ideal adaptation to changing requirements.=> Separate high-end reservoir in the damping group of the shock absorber.*** Better cooling of the damping during operation.*** This results in higher load capacity and longer lifespan of the shock absorber.=> QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect setting. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adapted to your needs by us through a spring with a higher spring rate. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally, please contact us

The Touratech Suspension Lowering Kit. The set includes replacement fork springs and a replacement spring for the shock absorber. With this spring set, you achieve a sensible lowering of -50mm while maintaining consistently good riding characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the BMW F800GS. After the conversion, the suspension offers significantly improved responsiveness and higher safety in critical situations. By replacing the springs at the front and rear, the balance of your motorcycle is preserved.   Info: Fits only for “BMW F800GS (2008-2012)“   Scope of delivery: - Fork springs for the original fork -50mm - Replacement spring for original shock absorber -50mm - including detailed installation instructions. - suitable fork oil. - Paste to improve the sliding properties of the inner tubes.   Our recommendation: Have the conversion carried out by a professional workshop. Installation note: Fork tool 01-300-5844-0 (HP-T65) is required for installation.   Info: The side stand and main stand may need to be adjusted in length.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

A lowering kit with fork springs and an E1 shock absorber from Touratech Suspension provides a sensible lowering of -50mm without compromising riding characteristics. Of course, some ground clearance is lost. The suspension components are perfectly tuned to the BMW G310 and offer significantly improved responsiveness and higher safety in critical situations compared to the original spring elements.   Info: Fits only for “BMW G310 2017-2023”   The facts: - Touratech Suspension shock absorber in gas/oil emulsion design - Spring preload adjustable - Rebound damping adjustable in 50 clicks - Spring, continuously progressive, black coated - Piston rod made of chrome-molybdenum steel, ø 16 mm - Damper piston ø 46 mm - Generously sized damper tube - Constant damping even under heavy load - High-quality finish - Fork springs with continuous progression - With ABE   Delivery includes: - Fork springs -50mm - Suitable fork oil. - Paste to improve the sliding properties of the fork tubes. - Ready-to-install E1 shock absorber -50mm - Adjustment tool - Including detailed installation instructions. - Installation instructions with setup information,   Our recommendation: Have the conversion carried out by a professional workshop.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed form.

The lowering by -25mm is the absolute top class in terms of suspension technology for your BMW F850GS Adventure with BMW DDC equipment. This premium shock absorber is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages. This Touratech Suspension DDA / Plug & Travel shock absorber is simply swapped for the BMW DDC shock absorber. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech suspension adapts to your adventure. You just have to ride off. The absolute top class in terms of suspension technologyThis Touratech Suspension DDA / Plug & Travel shock absorber is manufactured with the same precision components and parts that have already proven themselves over thousands of travel kilometers under the toughest conditions in our shock absorbers. The heart of this shock absorber is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Important note:- When lowering by -25mm, both the rear and front areas must be modified together. - Please refer to our accessories here in the web shop. Scope of delivery:- Touratech Suspension DDA Plug & Travel shock absorber -25mm- Ready for installation with connection plug and wiring.Note:For the safe stand of your BMW F850GS Adventure after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other extraordinary requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form.Do you have further questions? We are happy to advise you personally, please contact us

This shock absorber is perfect for reducing the seat height by -25mm for the BMW F850GS. At the same time, your BMW F850GS remains well-tuned and very suitable for touring. The shock absorber of type Level2 offers a large adjustment range and high reserves for the demands of motorcycle travel. The performance of the shock absorber allows for precise adjustment of your motorcycle's balance. In the front area of the BMW F850GS, suitable fork springs must be installed for compensation. The balance of the motorcycle can be easily and quickly restored by hand via the hydraulic preload adjustment. The damping adjustment of this shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort.Important points at a glance:=> The shock absorber is configured based on our experience for the BMW F850GS and is ready to ride.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle. The basic setup installed here is tuned for riders up to 100 kg including travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate and other configurations. Please use our suspension check form and send us the completed document.Scope of delivery: - Ready-to-install shock absorber.- ABE documents- Installation instructions / user manualNote:For the safe stand of your BMW F850GS after lowering, we recommend a shortened side stand and/or optionally a shortened center stand.Do you have further questions? We are happy to advise you personally, please contact us.

The lowering by 40mm for your BMW R1200GS/R1250GS Adventure with BMW DDC auto-leveling. This Touratech Suspension DDA / Plug & Travel Premium chassis is consistently designed for long-distance travel with heavy luggage, on any road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adjusts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is made with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are thus more stable and the seals are less stressed. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS Adventure, the side stand and/or center stand must be adjusted. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -40mm- Touratech Suspension DDA Plug & Travel rear shock absorber -40mm- Ready for installation with connection plug and wiring.The basic setup used here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

The lowering by 50mm for your BMW R1200GS/R1250GS with BMW DDC auto-leveling equipment. This Touratech Suspension DDA / Plug & Travel Premium chassis is specifically designed for long-distance travel with heavy luggage, on any type of road surface, including off-road stages designed. The Touratech Suspension DDA / Plug & Travel shock absorbers are simply swapped for the BMW DDC chassis. The existing connectors and switches on the handlebars are used as usual. This Touratech Suspension lowering is perfectly integrated into the motorcycle via the original BMW control unit. This allows you to continue using configurations in the BMW display for different riding modes and load adjustments. The Touratech chassis adapts to your adventure. You just have to ride off. The absolute top class in suspension technology This Touratech Suspension DDA / Plug & Travel chassis is manufactured with the same precision components and parts that have proven themselves over thousands of travel kilometers, under the toughest conditions in our shock absorbers. The heart of this chassis is the DDA high-performance valve developed and patented by Tractive. This allows the damping to be adjusted to any driving situation in fractions of a second. For the high loads during long-distance travel, our shock absorbers have larger piston diameters and thus more oil volume. This results in better cooling at high damping frequencies. The shock absorber and damping are therefore more stable, and the seals are less stressed. Scope of delivery:- Touratech Suspension DDA Plug & Travel front shock absorber -50mm- Touratech Suspension DDA Plug & Travel rear shock absorber -50mm- Ready for installation with connection plug and wiring. Important note:With this suspension solution, the rear and front areas of the motorcycle must be adjusted together. For the safe stand of your BMW R1200GS/R1250GS, the side stand and/or center stand must be adjusted.The basic setup installed here is tuned for riders up to 100 kg plus travel luggage. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Do you have further questions? We are happy to advise you personally, please contact us.E-mail: [email protected] Phone +49 (0)7728-9279-1555Please use our suspension check form and send us the completed form.

These progressive replacement springs are perfectly tuned to the original shock absorbers with factory lowering of the BMW R1250GS model. The front and rear shock absorbers thus have a better setup for the demands of motorcycle touring. You will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for “BMW R1250GS from 2018-2022 with BMW Dynamic ESA and original factory lowering” Our recommendation: The installation of the replacement springs should be done by a professional workshop. Scope of delivery: - Replacement spring for the front for original shock absorber with factory lowering. - Replacement spring for the rear for original shock absorber with factory lowering. - Installation instructions. Our recommendation: Have the installation done by a professional workshop. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

This shock absorber is the right choice for normal touring use on the BMW F650GS DAKAR. The type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design and finely adjustable damping allow for a more precise adjustment and balance than is possible with the standard components from motorcycle manufacturers. The spring preload can be adjusted with a tool to accommodate the large travel luggage. The damping adjustment of this Level 1 shock absorber allows for the necessary influence on the rebound and compression stages to meet your individual comfort requirements. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW F650GS DAKAR.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW F650GS DAKAR is:=> Progressive fork springs, Hyperpro BMW F650GS DAKAR 01-040-7412-0=> Progressive fork springs, Wirth BMW F650GS DAKAR 01-040-0457-0=> Replacing only one component will not achieve optimal handling.The equipment installed here with its adjustment options is sufficient if the suspension only needs to be adjusted for different load conditions rarely.Features of the Touratech Suspension Level 1 Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This results in very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic setting of the shock absorber. Reset possible in case of incorrect settings. If you have installed a larger tank than the original tank on your motorcycle or made modifications for additional luggage storage on your motorcycle, adjustments are possible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us.

The Level 2 Shock Absorber is the right choice for long-distance and touring use on the BMW F650GS Dakar. This type of shock absorber offers a wide adjustment range and high reserves for the demands of motorcycle travel. The separation piston design, hydraulic preload adjustment, and finely adjustable damping allow for a more precise adaptation of your motorcycle to different loading conditions than is possible with the standard components from motorcycle manufacturers. The balance of the motorcycle can be easily and quickly adjusted by hand via the hydraulic preload adjustment. The damping settings of this Level 2 shock absorber allow for the necessary influence on the rebound and compression stages to meet your individual requirements for riding comfort. Important points at a glance:=> The shock absorber is configured and ready to ride based on our experiences for the BMW F650GS Dakar.=> Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides.=> The shock absorber mentioned here is designed for a rider weight of up to 100kg including travel luggage.=> For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable component for the front of the BMW F650GS Dakar is:=> Progressive fork springs, BMW F650GS Dakar part no. 01-040-7412-0Replacing only one component will not achieve optimal handling.A shock absorber that allows you to easily and comfortably respond to different loading conditions of your motorcycle. Features of the Touratech Suspension Level 2 Shock Absorber:=> The shock absorber housing is made of aluminum. *** This results in the lowest possible weight. => Special, low-friction seals are installed.*** This leads to very low wear and a long lifespan of the shock absorber.=> Stable stainless steel bushings for the mounting screws are installed in the shock absorber eye. *** This ensures a stable, play-free fit of the mounting screw even under the highest loads.=> All components are designed for intensive use with heavy touring motorcycles. => The damping settings were developed based on the experiences and requirements of Touratech.*** The basis is many travel kilometers and the experiences from the operations of the Touratech Race Team.=> Separation piston design. This allows the damping fluids oil and nitrogen to act separately.*** Finer response of the shock absorber. *** High, precise damping performance even at very high damping frequencies (bad roads, tracks). *** Better cooling of the shock absorber. *** Minimal restrictions on the installation position of the shock absorber in the motorcycle.=> Hydraulic high-end preload adjustment via a conveniently positioned handwheel. => QR code on the shock absorber with individual shock absorber information.*** This allows for easy retrieval of shock-specific information by scanning with a smartphone.*** Always accessible information on the basic settings of the shock absorber. Reset possible in case of incorrect settings. The basic setup installed here is tuned for riders up to 100kg including travel luggage. Adjustmentsfor higher rider weights (more than 100kg) and/or predominantly passenger operation / with travel luggage arepossible. The shock absorber will then be individually adjusted to your needs by us with a spring of higher spring rate. Please use our suspension check form and send us the completed form. Do you have further questions? We are happy to advise you personally, please contact us