The Touratech reinforcement strut creates an additional, fourth support point! This establishes a real, secure cage around the valve cover and cylinder head. Acting forces are reliably absorbed, distributed, and redirected to the appropriate location in the frame. Thus, the strut is an absolutely sensible addition to the original BMW engine protection bar, which lacks this support. Its three mounting points leave the rear, upper area entirely dependent on the strength of the tube alone. What may be sufficient for falls while stationary can quickly lead to serious problems during proper off-road use of the GS! The risk of damaged valve covers then becomes real.   The original BMW engine protection bar is noticeably stabilized with the help of the Touratech reinforcement strut, thus reliably fulfilling its role as a fully functional crash bar again.   With its electropolished surface and the use of the same diameters, the strut fits both technically and visually perfectly with the BMW engine protection bar of the 1300 Boxer GS. highly functional additional support made from robust electropolished 25mm stainless steel tube custom-fit mounting kit specifically developed for the R 1300 GS easy to install   The additional fourth support point ensures maximum functionality. An absolute gain in safety, installed with minimal effort!

The extremely robust protective strip on the body is bolted and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the luggage lid.

Replacement cover for tool box luggage carrierIncludes lock and 2 keys

The extremely robust protection strip on the engine guard is bolted and can therefore be easily replaced after an accident, for example. Scope of delivery: Set (2x long)

The extremely robust protection strip on the engine guard is bolted and can therefore be easily replaced after an accident, for example. Scope of delivery: (Set 1x short/1x long)

The Travel side bag, with its 40 liters of volume, is the ideal companion for your next motorcycle trip.Thanks to the robust click closures, easy access and secure closing of the hard shell lid is guaranteed. The proven roll closure under the lid keeps the contents safe and waterproof in the bag. The mesh pocket inside the bag holds small items.The new Travel soft luggage series combines practical functionality with a distinctive design. The bags are welded waterproof, and the particularly robust Cordura material ensures long durability. The highlight of this new luggage system is the hard shell lids, which provide additional robustness to the bags.Additionally, there is a Molle system on the lid, where extra items can be attached. For passive safety and a distinctive look, reflective lettering and also reflective sections behind the side Molle patches provide visibility.The handle allows for comfortable handling after removing the bag. The D-rings can be used to attach the optionally available carrying strap, so you can keep your hands free.The Travel side bag fits perfectly on most luggage racks made of 18 mm round tube - like our Touratech luggage racks. The completely newly developed locking mechanism allows for easy attachment and equally easy removal from the luggage rack. The bag stays securely in place. Thanks to the lock preparation, you can retrofit optionally available locks that match your Touratech cases, navigation mounts, oil plugs, etc. This way, the bag is protected against theft, and you can continue to use your Touratech locking system key.- Waterproof- Up to 40 liters of volume- High-quality workmanship made in the EU- Optional locks available- Optional carrying strap available- Quick to attach and quick to remove- Suitable for most straight luggage racks made of 18 mm round tube

The space on the left and right below the passenger grab handles is perfect for attaching two side bags for smaller equipment items. They do not interfere in any way, but provide enough storage for a first aid kit, spare gloves, or the most important tools.Made from durable Cordura with easy access to the contents through water-repellent zippers and can be easily removed if needed.Two small bags that blend inconspicuously with the vehicle and are a great help!- Inserts made of robust and waterproof tarpaulin- We do not use simple nylon, but certified Cordura fabric made in Germany, as used in motorcycle protective clothing and expedition gear- Fabric inner side waterproof coated - Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading- Washable and easy to clean- The fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100- Reflective inserts from 3M Scotchlite ensure optimal visibility- Built for extreme loads and long durability - Best fit- Secure attachment yet quickly removable from the vehicle- Low weight with high payload and large usable volume- Water-protected, high-quality zippers- Large main compartment without disturbing dividers for maximum space and individual loading- Flat, narrow shape allows for plenty of freedom of movement for dedicated off-road use- Interesting, exclusive material mix with a refreshing design- All luggage systems are handcrafted in Germany with great careDimensions: (L x W x H) approx. 40 x 8 x 8 cmVolume: approx. 2 x 1 literColor: black

With this side stand foot extension, the R1150GS stands significantly more stable even on softer ground. Even when parking the motorcycle on grass, you don't always have to search for a wooden board or another base. This practical part is made from a combination of stainless steel laser parts and anodized aluminum. Easy and quick to install.Not suitable for the R1150GS Adventure

With this side stand foot extension, the contact area is increased by more than 2 times. This means your R 1200GS stands significantly more stable on softer ground and hot asphalt. The combination of stainless steel parts and a black anodized aluminum intermediate plate gives this extension a great look.Does not fit with a lowered motorcycle

The side stand extension increases the contact area by more than double, making the exhausting task of lifting a fully loaded bike a thing of the past. A mix of stainless steel and black anodized aluminum gives this extension a great look and full stability. With a secure attachment of the stand extension, it is always there when you need it, saving you a lot of hassle and frustration with this practical accessory.Not suitable for lowered suspension.

A well-known problem that has cost most motorcyclists their last nerve! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.

The side stand extension increases the contact area by more than double, making the exhausting task of lifting a fully loaded bike a thing of the past. A mix of stainless steel and black anodized aluminum gives this extension a great look and full stability. With a secure attachment of the stand extension, it is always there when you need it, saving you a lot of hassle and frustration with this practical accessory.Not suitable for lowered suspension.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered suspension.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5276-0 for that.Attention: Regardless of the model year, different side stands have been installed, so we recommend checking the shape of your side stand as well.Please use for: - Wide shape 01-045-5276-0- Narrow shape 1021-01-045-5275-0

The Touratech side stand foot extension increases the contact area of the side stand of the R 1300 GS to more than double! Lifting the fully loaded bike is now a thing of the past.A well-known annoyance that has cost most motorcyclists their last nerves! Soft ground. This starts with hot asphalt and goes through wet meadows to the end of a tour on the sandy beach. A small board or similar support is usually never at hand when needed.The Touratech extension allows for safe parking of the vehicle on any surface! Thanks to a secure attachment of the foot extension, it is always with you, saving you a lot of trouble and frustration with this practical accessory. A mix of stainless steel and black anodized aluminum gives this extension a great look and full stability. Last but not least, it should be mentioned that the deployment of the side stand is significantly simplified by the jagged base shape of the plate! Precisely designed for the side stand of the BMW R 1300 GS more than double the contact area Proven, robust sandwich construction made of stainless steel and black anodized aluminum Easy to install Every heavily loaded 1300 boxer with travel luggage will appreciate the 200% contact area of the Touratech side stand foot extension!for side stand No: 4653 1638616

Without a functioning side stand switch, your ride with the GS-Adventure is immediately over, as the ignition is interrupted.With the Touratech side stand switch protection, this extremely important component is perfectly protected from damage. Neither the tip of your boots nor branches or stones can harm it.Made from 1.5 mm thick stainless steel and supplied with all the necessary parts for installation, this nearly indestructible protection can be easily and quickly mounted.An absolute safety plus, both on and off-road!

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in no time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Color: black

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in a very short time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide a stunning effect with minimal effort!Color: black

In rainy rides, the rear wheel often splashes dirt and water directly onto your boots and legs. These high-quality, super lightweight plastic parts prevent this effect and also look great. Sold as a set for both sides.

The black anodized splash guard is mounted behind the license plate holder and extends it downwards and backwards. It effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. The aluminum splash guard additionally stabilizes the license plate and prevents it from vibrating loose. Material: black anodized aluminum

The black anodized splash guard is mounted behind the license plate holder and extends it downwards and backwards. It effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. The aluminum splash guard additionally stabilizes the license plate and prevents it from vibrating loose. Material: black anodized aluminum

No more dirty back and no more dirty luggage!Due to the sporty rear of the BMW R1300GS, a lot of dirt and especially water can land on the backs of the rider and passenger, as well as on the luggage. The proven aerodynamic "trick" has been optimized even further with side wings. Splash water and kicked-up dirt are cleverly diverted. The water spray from the rear wheel is broken, resulting in significantly less water and dirt being thrown upwards. The black anodized mudguard is simply mounted between the license plate and the license plate holder, extending it downwards and backwards. This effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. Additionally, the splash guard stabilizes the license plate and thus prevents it from vibrating off. The Touratech motorcycle splash guard has been specifically adapted to the license plate holder of the BMW R1300GS. Visually perfectly integrated into the vehicle design, it also fits smaller license plates. - made of black anodized aluminum - effective protection against splash water - also serves as a license plate reinforcement - Easiest installation with precise drill holes and included screws

Effective and aesthetically pleasing spoilers for the Touratech hand guards GD.- Protector and spoiler colors can be freely combined(Note: no BMW original colors for hand guards and spoilers)- Delivery includes: Left and Right

This special spoiler for the windshield of the BMW R1250GS/R1200GS allows for comfortable riding on long, fast stretches. Air turbulence and wind pressure on the helmet are significantly minimized.It is simply clipped onto the windshield and locked in place with a quick-release mechanism. For off-road use, the spoiler can be easily and quickly removed in seconds.A high-quality branded lock secures the spoiler against unauthorized removal. The locks are also available keyed alike with our ZegaCase and GPS mount locks.

This crash bar is specifically designed to match the aesthetics of the R1200GS. It incorporates the lines and shapes of the elegant boxer engine and integrates them optimally into the overall look of the motorcycle. Despite these aesthetic demands, it is undoubtedly one of the best crash bars on the market, as it not only protects the cylinders but also stabilizes the engine housing through a bridge construction with predetermined bending points. This way, in most fall scenarios, there is not such a great load on this mounting thread, and the engine housing remains intact. It would indeed be a shame if the valve cover is protected, but the engine housing gets destroyed. With additional supports on the main frame, the connecting bar is also designed to be very stable and can thus absorb greater loads and forces.The crash bar is made of stainless steel, as the R1200GS practically demands this high-quality and noble material.Installation is very simple and can be completed in a short time. Most necessary maintenance work can also be carried out without disassembling the crash bar. Can be installed together with the Touratech cylinder protection.Article number: 044-0160 / 044-0360 -- 047-0162 * from 2010 * / 047-0163 * from 2010 *