Angeboten wird hier ein Gebrauchtteil Fahrzeug: K48 K1600GT Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer Teilenummer: 46717717504

With the comfortable backrest for the aluminum top case, the passenger enjoys more comfort both on short trips and on long tours. Increased comfort for the passenger. Reduces fatigue on long distances. Additional Information

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 7 721 223 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Original BMW Spare Part / Accessory Diameter 21 mm

Original BMW Spare Part / Accessory Diameter 41 mm

This small but practical bag makes perfect use of the available space under the standard luggage bridge and fits individually or together with the side bags 045-5838 as if tailor-made!The attachment is done through sturdy and easy-to-mount straps, and the large, covered zipper allows for quick access to the contents.Conclusion: a small bag with great utility!-we do not use simple nylon, but certified Cordura fabric as used in motorcycle protective clothing and expedition gear-fabric inner side waterproof coated -Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-built for extreme loads and long durability -best fit-secure attachment yet quickly removable from the vehicle-low weight with high payload and large usable volumeAttention: Please use a paint protection film if necessary! Dimensions: (L x W x H) approx. 20 x 20 x 4 cm Volume: approx. 1.5 liters.Color: black

Whether for a small evening ride, as a replacement for the oversized tank bag, or as additional luggage on a world tour – waterproof storage on the motorcycle is always useful! The crash bar bags from Touratech Waterproof are waterproof and dustproof welded. The robust, resilient material is already familiar to you from our Rack Packs. In the crash bar bags, it is even processed in a double layer.With 2 x 3 liters of packing volume, the bags offer ample space for your wallet, documents, snacks, or other small items.The water-protected YKK brand zipper can be easily operated even with thick gloves. The extra-large zipper garage effectively prevents rainwater from entering due to the wind while riding.Thanks to the vehicle-specific Velcro straps, the bags can be attached easily and securely to the fairing crash bar. Quickly find the contents thanks to the yellow interior. The material doubling provides additional protection for your items.The design of the crash bar bag integrates subtly into the lines of your R1250GS Adventure. The reflective strip enhances your passive safety through better visibility. Especially in rain and darkness, this is an unbeatable advantage.Sold as a set for both sides.Dimensions: (L x W x H) approx. 18 x 6 x 34 cmVolume: approx. 2 x 3 liters.

Ball Bearing

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6203 Inner diameter:   17.00 mmOuter diameter:   40.00 mmWidth:   12.00 mmSealing:   2 sealing discs Bearing clearance:   Standard

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6203 Inner diameter:   17.00 mmOuter diameter:   40.00 mmWidth:   12.00 mmSealing:   2 sealing discs Clearance:   Increased clearance (C3)

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

The batterycover in carbon for the BMW K 1200 R (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 R (2008-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

Battery Rubber Holder

Battery Strap Total Length: 200 mm

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6005 Inner diameter:   25.00 mmOuter diameter:   47.00 mmWidth:   12.00 mmSealing:   2 sealing discs Clearance:   Increased clearance (C3)

Angeboten wird hier ein Gebrauchtteil Fahrzeug:  R1150RS Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 01467680226 / 01467680236

Angeboten wird hier ein Neuteil Fahrzeug: CE02 Hersteller: BMW Neupreis: 39,89 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 01405A902A4

  Befestigung Seitenständer