This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This rear Mudgard fits to R 1200 R / RS (LC) modells from 2018!  This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This rear Mudgard fits to the R 1200 GS (LC) Modells from 2018!  This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The rear frame cover left side for the BMW R NineT Serie in carbon fibre.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear frame cover right side for the BMW R NineT Serie in carbon fibre.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R 1250 GS replaced the orginial part easily. mounting with only 3 bolts on the bevel housing of the bike. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 460g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rear Hugger BMW R 1250 R and BMW R 1250 RS starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R 1150 GS is attached to the vehicle&rsquos brake calliper bracket using the included screws. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The rear hugger for the BMW R 1100 S is attached to the vehicle&rsquos brake calliper bracket using the included screws. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R 1200 R (2011-2014) / R nineT (2014-now) with ESA suspension is attached to the vehicle&rsquos bevel drive housing using the included screws. Attaching it is so easy and ingenious it&rsquos been acknowledged and protected by the German patent office. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rear Hugger Carbon - BMW R 1200 R (LC) from 2015 and BMW R 1200 RS (LC) from 2015This parts fits to modells from 2015 - 2017!The rear hugger in carbon is fixed on the bike&rsquos cardan housing by using 3 screws. This screw connection is so ingenious and easy that we patented it by the german patent office. The specially designed rear hugger reduces considerably dirt and spray thrown up by the rear wheel and considers standard chassis and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice.You can find a 360° video of our part in the category product videos!The part is made completely out of pre-preg carbon fibre materials using an autoclave. We use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger designed for the offroad tires fits the BMW R nineT Urban GS / Scrambler and is attached to the vehicle&rsquos bevel drive housing using the original screws. Attaching it is so easy and ingenious it&rsquos been acknowledged and protected by the German patent office. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger in retrostyle for the BMW R nineT (2014-now) is attached to the vehicle&rsquos bevel drive housing using the included screws. Attaching it is so easy and ingenious it&rsquos been acknowledged and protected by the German patent office. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon rear hugger for the BMW S 1000 XR replaces the original part using the original mounting points. The rear part of the chain guard is already incorporated into this rear hugger. the original chain guard stays on the bike. We could extend the length of the rear hugger to improve the protection of the rear shock. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The carbon rear hugger for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) replaces the original part using the original mounting points. The chain guard is already incorporated into this rear hugger. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon rear hugger for the BMW S 1000 RR replaces the original part using the original mounting points. The chain guard is already incorporated into this rear hugger. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear light cover without handgrip openings offers an elegant method for removing the pillion handle for 1-person use. This carbon piece eliminates the unused openings from removing the pillion handles. The rear light cover without handgrip openingis in carbon for the BMW K/R models is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Vehicle-Specific Information: for Sachs ForkMachined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application