HATTECH STAINLESS STEEL Exhaust System WITHOUT Interference Pipe for BMW R 100 S RS RT for models with 40mm header HATTECH STAINLESS STEEL - Polished exhaust system with 40mm header diameter HATTECH (STAINLESS STEEL) for 40mm header compatible with mufflers with 40mm connection no further modifications necessary WITHOUT interference pipe Available in various surface options:              untreated / not shortened               brushed              polished              brushed & heat colors at the welds  Fits R100S (from 9/1978) - R100RS - R100RT for models up to 9/1980 with 40mm header

Standfest. Stabil. Einfach zu bedienen. Die Hauptständer von Hepco&Becker schränken die Schräglagenfreiheit beim Fahren meist nicht ein und sind extrem robust. Dank ausgefeilter Geometrie und rutschfester Trittfläche ist es ganz einfach in jeder Situation das Motorrad sicher abzustellen.Die präzise gefertigten Ständer sind sehr stabil, sandgetrahlt, grundiert und schwarz pulverbeschichtet und daher wetter- und wertbeständig. Hauptständer vereinfachen Wartungsarbeiten und sorgen für einen sicheren Stand, z.B. beim Tanken. Beim Überwintern entlasten sie die Federelemente und das Hinterrad.ABE wird mitgeliefertmeist keine Einschränkung der Schräglagenfreiheithochwertiges OberflächenfinishLieferumfang: Hauptständer+ Montagematerial + Anleitungbitte beachten Sie die hinterlegte AnbauanleitungHilfreiches Werkzeug zum Einhängen der Zugfeder: Artikelnummer: 700030

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1150RT Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen, 1 Halter eingerissen Teilenummer: 52537661177 / 178

Angeboten wird hier ein Gebrauchtteil Hersteller: BMWFahrzeug: R1100GS Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, leicht abgegriffenTeilenummer: 61311459982

The counter holder, which is mounted to the bag, is included with the model-specific tank ring. If you want to use this tank bag as a second tank bag on your tank ring, you will need an additional tank bag counter holder. Item: 506000 (Lock-it) or 516000 (Basic) Scope of delivery: 1x tank bag Note:The counter holder, which is mounted to the bag, is included with the model-specific tank ring. If you want to use this tank bag as a second tank bag on your tank ring, you will need an additional tank bag counter holder. Item: 506000 (Lock-it) or 516000 (Basic) Material 100% polyester PE foam (100% polyethylene) reinforced side walls for shape retention sturdy base shell made of EVA, covered with Lycra stretch Comfort/Features outer pockets organizer compartments 360-degree zipper for volume expansion 3M-SCOTCHLITE™ reflective piping integrated rain cover map and navigation pocket integrated in the lid carrying handle, luggage hook, and carrying strap cable outlet 2-way zipper (lockable with a small combination lock, for example) Attachment on the motorcycle model-specific Lock-it or Basic tank ring from Hepco & Becker individual positioning depending on tank shape and handlebar angle through flexible attachment channel recommended load: 3kg (please observe the motorcycle manufacturer's specifications, as well as any model-specific notes on the tank ring) recommended maximum speed: 130km/h

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The base mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look is also maintained in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked with a metal locking mechanism on the carrier Luggage racks generally do not require ABE or registration Vehicle-specific notes: Single luggage rack is not combinable with the side case carrier. Fits for: BMW R 65 from model year 1986/ R 80 RT from model year 1985/R100RS/RT (1986-1995)

The Hepco&Becker complete carrier, consisting of side case carriers and a tubular luggage bridge, is securely bolted to the motorcycle and can be only assembled together. This carrier allows for the mounting of nearly all Hepco&Becker side cases. Almost all top cases from our range can be mounted on the tubular luggage bridge. (The Orbit top case, as well as top cases with a universal plastic plate, do not fit)The side cases are locked to the carrier using a locking mechanism. The required lock adapters, which are bolted to the right and left of the side case carrier, are included as standard in the case set (Article number lock adapter: 700114)The model-specific and solidly constructed carriers are perfectly adapted to the respective motorcycle and reinforced at heavily stressed points with special inner tubes. Construction from steel tube Made in Germany firmly bolted to the motorcycle can only be assembled together suitable for almost all Hepco&Becker side cases and top cases Restrictions can be found in the model-specific notes or the assembly instructions Recommended load: 10kg per side case / 5kg in the top case (please observe vehicle-specific notes, our assembly instructions, as well as motorcycle manufacturer specifications) Scope of delivery: right carrier, left carrier, tubular luggage bridge for the rear, mounting materials, and instructions Luggage carriers do not require ABE and are registration-free

The Hepco&Becker complete carrier, consisting of side case carriers and a tubular luggage bridge, is securely bolted to the motorcycle and can be only assembled together. This carrier allows for the mounting of nearly all Hepco&Becker side cases. Almost all top cases from our range can be mounted on the tubular luggage bridge. (The Orbit top case, as well as top cases with universal plastic plates, do not fit)The side cases are locked to the carrier using a locking mechanism. The necessary lock adapters, which are bolted to the right and left of the side case carrier, are included as standard in the case set (Article number lock adapter: 700114)The model-specific and solidly constructed carriers are perfectly adapted to the respective motorcycle and reinforced at heavily stressed points with special inner tubes. Construction from steel tube Made in Germany securely bolted to the motorcycle can only be assembled together suitable for almost all Hepco&Becker side cases and top cases Restrictions can be found in the model-specific notes or the assembly instructions Recommended load: 10kg per side case / 5kg in the top case (please observe vehicle-specific notes, our assembly instructions, as well as motorcycle manufacturer specifications) Scope of delivery: right carrier, left carrier, tubular luggage bridge for the rear, mounting materials, and instructions Luggage carriers do not require ABE and are registration-free Suitable for: BMW K 75 S / RT from model year 1990

The Hepco&Becker complete carrier, consisting of side case carriers and a tubular luggage bridge, is securely bolted to the motorcycle and can be only assembled together. This carrier allows for the mounting of nearly all Hepco&Becker side cases. Almost all top cases from our range can be mounted on the tubular luggage bridge. (The Orbit top case, as well as top cases with a universal plastic plate, do not fit)The side cases are locked to the carrier using a locking mechanism. The required lock adapters, which are bolted to the right and left of the side case carrier, are included as standard in the case set (Article number lock adapter: 700114)The model-specific and solidly constructed carriers are perfectly adapted to the respective motorcycle and reinforced at heavily stressed points with special inner tubes. Construction from steel tube Made in Germany firmly bolted to the motorcycle can only be assembled together suitable for almost all Hepco&Becker side cases and top cases Restrictions can be found in the model-specific notes or the assembly instructions Recommended load: 10kg per side case / 5kg in the top case (please observe vehicle-specific notes, our assembly instructions, and motorcycle manufacturer specifications) Scope of delivery: right carrier, left carrier, tubular luggage bridge for the rear, mounting materials, and instructions Luggage carriers do not require ABE and are registration-free Vehicle-specific notes: For models with central spring strut. Indicators remain in original position. Suitable for: BMW R 65 from model year 1986 / R 80 RT from model year 1985 / R100RS/RT (1986-1995)

The Hepco&Becker complete carrier, consisting of side case carriers and a tubular luggage bridge, is securely bolted to the motorcycle and can be only assembled together. This carrier allows for the mounting of nearly all Hepco&Becker side cases. Almost all top cases from our range can be mounted on the tubular luggage bridge. (The Orbit top case, as well as top cases with a universal plastic plate, do not fit)The side cases are locked to the carrier using a locking mechanism. The required lock adapters, which are bolted to the right and left of the side case carrier, are included as standard in the case set (Article number lock adapter: 700114)The model-specific and solidly constructed carriers are perfectly adapted to the respective motorcycle and reinforced at heavily stressed points with special inner tubes. Construction from steel tube Made in Germany securely bolted to the motorcycle can only be assembled together suitable for almost all Hepco&Becker side cases and top cases Restrictions can be found in the model-specific notes or the assembly instructions Recommended load: 10kg per side case / 5kg in the top case (please observe vehicle-specific notes, our assembly instructions, and motorcycle manufacturer specifications) Scope of delivery: right carrier, left carrier, tubular luggage bridge for the rear, mounting materials, and instructions Luggage carriers do not require ABE and are registration-free Vehicle-specific notes: For models with two shock absorbers. Indicators remain in the original position.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

compatible with most Hepco&Becker side case carriers. (Please note any potential restrictions in the model-specific notes of the carrier) suitable for one helmet and more includes key and locking cylinder includes lock adapter to secure the case to the side case carrier waterproof thanks to special sealing cover is screwed on and can be painted in vehicle color if needed integrated bumper protects against minor bumps case shell made of impact-resistant, molded plastic cases can be keyed alike to existing cases or top cases.Please enter the key number in the comments field during the ordering process. Scope of delivery: right side case + left side case + 2x lock adapters optional inner bags available in the accessory program Recommended load: 10kg per side case (Please note the model-specific notes of the respective carrier, as well as the motorcycle manufacturer-specific information)

The special Journey Topcase 30 is delivered with a universal mounting plate and installation accessories. This allows for attachment to almost any third-party luggage rack with a flat mounting surface, for which we do not offer a model-specific top case rack. not compatible with Hepco&Becker tube luggage racks, Alurack luggage racks, or Easyrack luggage racks waterproof case shell made of impact-resistant plastic includes universal mounting plate and installation materials includes key and lock cylinder extensive range of accessories available suitable for one helmet Recommended load: 3-5kg in the top case (Please note the model-specific instructions for each rack, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The base mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked with a metal retaining lock on the carrier Luggage racks generally do not require ABE or registration Vehicle-specific notes: can be combined with original case holders.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The base mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked to the carrier with a metal locking mechanism Luggage racks generally do not require ABE or registration Vehicle-specific notes: Our luggage rack is mounted on the original rack. The topcases equipped with a metal locking mechanism from HEPCO&BECKER can be attached to it.

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The principle of operation of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the sides of the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the product family of Royster side bags and the Royster rear bag No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The ribs attached to the sides of the magnets mechanically secure the system. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the respective motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note the model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Use of lockable Lock-it screws not possible. Xplorer side cases do not fit. Xplorer and Xceed side cases do not fit!

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER side stand enlargement! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black coated upper steel counterplate easy installation with just a few screws does not require ABE or registration