Fan-disc clutch - BMW original spare part

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Feder Seitenständer

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Pin for Footpeg    Stainless Steel   Dimensions: - Total Length: 37mm - Head Diameter: 11mm - Bottom Diameter: 8mm  

Footpeg Plate 28 mm Lowered for BMW K1200GT05including ABE With the footpeg lowering plate, it goes pleasantly downwards.With the footpeg plate, you gain more legroom and achieve a lowering of the footpegs of your BMW K1200GT05 by a full 28 mm.This allows you to achieve a natural ergonomics and a healthier sitting position.With the new version, you no longer need to replace the brake lever. All items have been mounted and tested on original motorcycles - without any modifications.

Footpeg Lowering Kit for the Rider for BMW K1300GTincluding ABETo individually improve sitting comfort, we have developed this footpeg lowering kit for the BMW K1300GT.Perhaps you have already experienced discomfort in your knees and groin during a longer tour.With our modifications, you can enjoy the legroom that corresponds to your height.With the altered footpeg, you achieve a lowering of 40 mm. This allows for a natural ergonomics and a healthier sitting position.During off-road rides, the footpeg can be quickly replaced with the original one.Please note that ground clearance is limited with our footpeg lowering kit.The advantage of this adapter is that the original footpeg is retained.Scope of delivery: Kit for both sides. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Fork Retaining Ring Original Spare Part

Vehicle-Specific Information: Attention: This standpipe is 50 mm shorter than the original. BMW has delivered 2 different versions of this standpipe under the identical original number: with and without thread at the top. This item is the version without thread at the top.Fork Standpipes from JMP - made from high-quality raw materials - special chrome coating with low breakaway torque - each standpipe undergoes a quality inspection before delivery - manufactured on state-of-the-art CNC machines in Central EuropeTechnical Data:Upside down: No Outer Diameter: 41 mmInner Diameter: 33 mmLength: 602 mmTop Connection: Snap Ring Bottom Connection: No Thread Color: chrome

Brake Caliper Repair Kit

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and run-out safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   260 mmInner Diameter:   62 mmBolt Circle:   79 mmNumber of Holes:   5 Hole Diameter:   8.5 mmThickness:   4 mmDesign:   fixed Manufacturer:   Brembo

Thanks to the use of high-quality materials, the floating-mounted discs offer excellent performance. They consist of a stainless steel friction ring and a brake pot made from CNC-machined aluminum alloy, which is connected with ten drive pins and then anodized. Technical Data:Outer Diameter: 285 mmInner Diameter: 62 mmBolt Circle: 79 mmNumber of Holes: 4 Hole Diameter: 10.5 mmThickness: 5 mmOffset: 29 mmDesign: floating Manufacturer: Brembo

Thanks to the use of high-quality materials, the floating-mounted discs offer excellent performance. They consist of a stainless steel friction ring and a brake pot made from CNC-machined aluminum alloy, which is connected with ten drive pins and then anodized. Technical Data:Outer Diameter: 305 mmInner Diameter: 118 mmBolt Circle: 134 mmNumber of Holes: 6 Hole Diameter: 9 mmThickness: 5 mmDesign: floating Manufacturer: Brembo

Thanks to the use of high-quality materials, the floating-mounted discs offer excellent performance. They consist of a stainless steel friction ring and a brake pot made from CNC-machined aluminum alloy, which is connected with ten drive pins and then anodized. Technical Data:Outer Diameter: 285 mmInner Diameter: 62 mmBolt Circle: 79 mmNumber of Holes: 4 Hole Diameter: 10.5 mmThickness: 4 mmOffset: 29 mmDesign: floating Manufacturer: Brembo

10/49 Carbon-Ceramic Street Brake Pad   Identical organic compound as the OE pad to ensure safe, consistent braking performance that reflects the manufacturer's original specifications.

LA Sintermetall Longlife Street Brake Pad for Front   A brake pad designed for longevity. It is characterized by excellent efficiency in all areas of use.

Vehicle-Specific Information:  for double discSV - Friction Material CompositionFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for motorsport, as there is no heat resistance above 400 degrees.Only suitable for the front axle.

The clever design choice for the carbon fender makes it appear slimmer. yet the rear fender was designed very wide to minimize splashing water and enhance the protection. The front fender for the BMW F 800 S / ST (2006-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Wheel Bearing Set JMP

Front wheel hub cover for the hole in the wheel mount - for your F800R-F800S-F800ST All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Fuel Filter Screen

Fuel Tank Seal

Fuel Tap

Fuel Tap