for R1200GS from 2013/ BMW R1200GS Adventure from 2014/ BMW R nineT/ BMW R1200RT from 2014/ BMW R1200R from 2015/ BMW R1200RSJust a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping in-easy removal for maintenance work-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: blackAlso fits the BMW RnineT (not Scrambler)!

Just a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is now hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping on-easy removal for maintenance-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: redAlso fits the BMW RnineT (not Scrambler)!

Safety plus. Braking processes are better recognized. Additional brake light. Additional Information            Chrome trim must be ordered separately.  

A small part prevents expensive damage!Unfortunately, even a simple tip-over of the motorcycle while stationary can cause severe scratches and further damage to the gearbox housing of the R1300/1250/R1200. If such an accident occurs off-road, debris and dirt can even lead to damage to the rear axle seal, and in the worst case, continuing to ride may not be possible due to leaking oil!By timely installation of the highly durable, elegantly designed crash pads, this risk can be eliminated and costly follow-up damages can be prevented!-easy installation and excellent durability-Material mix of high-strength aluminum and durable PE plastic-uniquely elegant, sporty design with a textured surface-slight chamfer for maximum lean angle freedom on the road and optimal clearance off-road-easy disassembly possible if neededColor: black / silver

The exposed rear axle housing unfortunately suffers greatly during off-road rides and is often damaged so severely that further travel is out of the question.To avoid scratches and stone chips, as well as more serious damage when hitting gravel or other obstacles, we have developed a perfect protection.It fits snugly around the cardan housing like a protective hand and is made from extremely impact-resistant, fiberglass-reinforced plastic. Of course, we have taken into account the cooling air supply provided by BMW and left the corresponding opening at the bottom free.Last but not least, our cardan grinding protection gives your BMW a distinctive, individual look!The attachment is done with an easy-to-install mounting kit made of anodized aluminum.Optional: Cardan crash pad 01-045-5505-0-made of fiberglass-reinforced PU plastic-easy to install-maximum protection effect -lightweight-fascinating appearance-repellent function even against branches and loose stonesColor: black

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Easy to install + lightweight + high protectionWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick silver anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5132!

Vehicle: R1250GS R1200GS LC Manufacturer: BMW Condition: New Description: sold as shown, 4 pieces Part Number: 31488550092

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

Angeboten wird hier ein NeuteilHersteller: BMW Zustand: Neu Beschreibung: wird verkauft wie abgebildet Teilenummer:31428545296 Fahrzeug: K50 R1200GS R1250GS K51 R1200GS Adventure LC R1250GS Adventure K52 R1200RT LC R1250RTK25 R1200GS + AdventureK26 R1200RT R900RTK27 R1200R259 R1100GS R850GSR21 R1150GS + Adventure259R R1100R R850RR28 R1150R + Rockster R850R259 R1100RT R850RTR22 R1150RT R850RT259C R1200C + Montauk + Independent R850CK30 R1200CLK589 K1200LTC1 125/200

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Handbremsarmatur HBZ vorn Handbremshebel für BMW R1200GS LC R1250GS + Adv. RT RS R RnineT Angeboten wird hier ein GebrauchtteilFahrzeug: R1200R LC, R1250R, R1200RS, R1250RS, R1200GS LC, R1250GS, R1200GS LC Adventure, R1250GS Adventure, R1200RT LC, R1250RT, RnineT (K21) Hersteller: BMWNeupreis: 454,88 € Zustand: kaum Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 32728559604, 32728526541 Nummer auf dem Bauteil: 8 553 933

Adjustable Handlebar Slider for BMW R1200RT LC and R1250RT LCincluding ABE At the request of many customers, we have now designed an adjustable handlebar slider for the BMW R1200RT LC and the R1250RT LC, which is based on a new steering head plate.Since the original design does not allow the handlebars to be brought significantly closer, we were forced to manufacture a new steering head plate.Our principle, which we have been following for 20 years, is the adjustability of the seating position. We have achieved this with the new handlebar slider.Only by manufacturing a new steering head plate is it possible to bring the handlebars as desired a total of 65 mm closer and not just higher.In the resting position, the handlebar slider is 31 mm closer to the rider than the original. From this point, the motorcycle handlebars can now be adjusted towards the rider in three stages using an index pin, bringing the handlebars up to 65 mm closer than the original. The handlebars will also be 100 mm wider.This allows you to adjust the super tourer according to your tour, body size, and comfort. The combination with our flexibly adjustable footrests completes the package and contributes to an absolutely relaxed riding experience.You achieve a natural ergonomics for a pleasant, upright seating position. This was one of our most elaborate projects, which we are particularly proud of.Please note, the conversion takes approximately 4 hours. All items were mounted and tested on original motorcycles - without any aftermarket modifications.

The counter holder, which is mounted to the bag, is included with the model-specific tank ring. If you want to use this tank bag as a second tank bag on your tank ring, you will need an additional tank bag counter holder. Item: 506000 (Lock-it) or 516000 (Basic) Scope of delivery: 1x tank bag Note:The counter holder, which is mounted to the bag, is included with the model-specific tank ring. If you want to use this tank bag as a second tank bag on your tank ring, you will need an additional tank bag counter holder. Item: 506000 (Lock-it) or 516000 (Basic) Material 100% polyester PE foam (100% polyethylene) reinforced side walls for shape retention sturdy base shell made of EVA, covered with Lycra stretch Comfort/Features outer pockets organizer compartments 360-degree zipper for volume expansion 3M-SCOTCHLITE™ reflective piping integrated rain cover map and navigation pocket integrated in the lid carrying handle, luggage hook, and carrying strap cable outlet 2-way zipper (lockable with a small combination lock, for example) Attachment on the motorcycle model-specific Lock-it or Basic tank ring from Hepco & Becker individual positioning depending on tank shape and handlebar angle through flexible attachment channel recommended load: 3kg (please observe the motorcycle manufacturer's specifications, as well as any model-specific notes on the tank ring) recommended maximum speed: 130km/h

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag