Brake pads & brake discs

Bremsscheibenschraube JMP Bolt Made from 316 stainless steel, which offers the following advantages: - excellent strength - outstanding corrosion resistance - high resistance to acids - black anodized Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.

Guide Pin Set for Brake Pad   Original Spare PartTechnical Data:Mounting:   Thread M10 x 1.00 Shaft Diameter:   6 mmTotal Length:   58 mmShaft Length:   40 mm

for R1200GS from 2013/ BMW R1200GS Adventure from 2014/ BMW R nineT/ BMW R1200RT from 2014/ BMW R1200R from 2015/ BMW R1200RSJust a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping in-easy removal for maintenance work-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: blackAlso fits the BMW RnineT (not Scrambler)!

Just a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is now hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping on-easy removal for maintenance-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: redAlso fits the BMW RnineT (not Scrambler)!

Brake Caliper Piston Set 28mm

SP Sintered Metal Brake Pads for Rear (SP) A sintered mixture specifically designed for rear wheel brakes (SP) that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

LA Sintermetall Longlife Street Brake Pad for Front   A brake pad designed for longevity. It is characterized by excellent efficiency in all areas of use.

EBC brake discs. MADE IN UK.Ziel in the development is to improve the braking performance compared to the original brake disc. EBC used HPSR steel with a low carbon content, having a higher coefficient of friction by 18%. This steel is much more resistant to rust than cast steel. In addition, the entire surface with a 3-micron thick zinc coating is protected, which already abrades in the area of ​​the pad contact zone when decelerating. Only in this area Light surface rust can form on prolonged service life. The brake discs are drilled in the wings of a bird design to make do with as few holes as possible with optimum cleaning of the brake disc of rainwater and brake dust. The fewer holes are provided, the better the wet braking performance and the lower the wear. - Rigid Bremsscheibe.- Ground from rolled steel HPSR gefertigt.- with low carbon content with optimized braking surface hole pattern gebohrt.- radial. - Galvanized to protect against Korrosion.- EBC EBC Organic recommends brake pads or for sporty drivers EBC Double-H Sinterbremsklötze.- Independent design.

Bremsscheiben EBC. MADE IN UK. Ziel bei der Entwicklung ist die Verbesserung des Bremsverhaltens gegenüber der Originalbremsscheibe. EBC verwendet HPSR Stahl mit einem niedrigen Kohlenstoffgehalt, der einen um 18% höheren Reibbeiwert besitzt. Dieser Stahl ist wesentlich widerstandsfähiger gegen Rost als Gussstahl. Zusätzlich ist die gesamte Oberfläche mit einer 3 Mikron dicken Zinkschicht geschützt, die sich im Bereich der Bremsbelagkontaktzone schon beim Einbremsen abschleift. Lediglich in diesem Bereich kann sich leichter Flugrost bei längerer Standzeit bilden. Die Bremsscheiben sind im Vogelschwingendesign gebohrt, um mit so wenig Bohrungen wie möglich bei gleichzeitig optimierter Reinigung der Bremsscheibe von Regenwasser und Bremsstaub auszukommen. Je weniger Bohrungen angebracht sind, desto besser ist das Nassbremsverhalten und desto geringer ist der Verschleiß. - Starre Bremsscheibe.- Aus gewalztem HPSR Stahl mit niedrigem Kohlenstoffgehalt gefertigt.- Bremsfläche mit optimiertem Lochmuster gebohrt.- Radial geschliffen.- Verzinkt zum Schutz gegen Korrosion.- EBC empfiehlt EBC Organic Bremsklötze oder für sportliche Fahrer EBC Double-H Sinterbremsklötze.- Eigenständiges Design.

EBC Brake Discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a birdwing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Galvanized for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design.Technical Data:Number of Holes:   5 Design:   rigid Manufacturer:   EBC

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

All brake discs come with an ABE, also for scooters. The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts. All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel. The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads. A uniform temperature rise and fall allows for a constant pressure point. A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours. Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc Allround - Round outer contour with perforated brake edge - Available in rigid and floating variants - Coordinated design from front to rear axle Technical Data:Outer Diameter: 320 mmInner Diameter: 181 mmBolt Circle: 202.5 mmNumber of Holes: 5 Hole Diameter: 16.5 mmThickness: 4.5 mmDesign: rigid Manufacturer: TRW

TRQ Brake Pads   The new pads with the new compound are the successors to the previously successful SRQ pads, featuring a significant upgrade in performance. They are classified as racing pads, but with the new ECE R90, they also have street approval. This makes them particularly suitable for giving it your all on the racetrack (e.g., during track days) and then being able to ride directly home afterward. The target audience is ambitious, sporty riders. The TRQ is positioned above the SRT.   - Higher braking performance due to a higher and more stable friction coefficient (compared to the previous SRQ) - More direct response due to optimized initial bite - Significantly lower wear on pads and discs - Approved for the street with ECE R90! - The friction material is firmly bonded to the backing plate with the NRS system - Easy bedding in recommended for optimal performance - Particularly thermally resilient thanks to the innovative sintering process  

All brake discs come with an ABE, also for scooters.   The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts.   All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel.   The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads.   A uniform temperature rise and fall allows for a constant pressure point.     A new special alloy prevents excessive corrosion. Laser technology enables a lightweight design with fine contours.   Each brake disc can be individually paired with brake pads from the TRW-Lucas range. TRW-Lucas floating brake disc RAC   - Notched outer contour with slotted brake edge - Available in rigid and floating variants - Coordinated design from front to rear axleTechnical Data:Outer Diameter:   320 mmInner Diameter:   181 mmBolt Circle:   203 mmNumber of Holes:   5 Hole Diameter:   8.4 mmThickness:   4.5 mmDesign:   rigid Manufacturer:   TRW

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while also providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   276 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

SA Sintered Metal Front Brake Pads (SA) A sintered mixture specifically designed for front wheel brakes, providing improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

Without information about the wheel speed, the ABS cannot function. Especially for machines that are often used on loose surfaces, proper protection of the sensitive wheel sensors is therefore essential.The elegantly designed stainless steel cover protects the front ABS sensor from coarse dirt and stones.

All brake discs come with an ABE, also for scooters. The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts. All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel. The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads. A uniform temperature rise and fall allows for a constant pressure point. A new special alloy prevents excessive corrosion.Laser technology enables a lightweight design with fine contours. Each brake disc can be individually paired with brake pads from the TRW-Lucas range.TRW-Lucas floating brake disc Allround - Round outer contour with perforated brake edge- Available in rigid and floating variants- Coordinated design from front to rear axle Technical Data:Outer Diameter: 276 mmInner Diameter: 136 mmBolt Circle: 160 mmNumber of Holes: 5 Hole Diameter: 10.5 mmThickness: 5 mmDesign: rigid Manufacturer: TRW