Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

The rear undertray for the BMW S 1000 RR in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rear Wheel Bushing Diameter = 15.8 mm Length = 84.5 mm

Regulator / Rectifier 2704

Vehicle-Specific Information:  Government VehiclesRegulator/Rectifier   For all BMW 2V Boxer models from 1969 (government version, black). 0.5 volts higher charging voltage.  

Offered here is a used part Vehicle: R45 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown Part number: 12321244409

HELLA Working Current Relay 5-pole, 12 V With 2 outputs Power Mini Relay With parallel resistor to the coil Closes the circuit between the power source and an electrical consumer Ideal for switching paired consumers Application area: main headlights, auxiliary headlights, horns, heaters, fan motors, power windows, climate and ignition systems, etc. Technical Data Connector design ID: B2 Wiring diagram: S6 Temperature range, max: 80 °C Load capacity (at +80 °C) closing contact Ohmic load: 40 A Inductive load: 30 A Capacitive load: 30 ATechnical Data:Voltage: 12 VNumber of Poles: 5 Switch Function: Normally Open Load Capacity: 40 AWith Holder: No

Repair Kit for Fuel Pump Quick Coupling Spare Part for e.g. BMW R1200GS R1200R R1200RT K1200 .... This repair kit can be used to repair a leaking or broken connection on the fuel pump. The original screwed connections in the fuel pumps often have hairline cracks! Quick, cost-effective, and easy installation. Scope of delivery: 1 x Coupling nut part brass chrome-plated with shut-off, 3/8" NPT thread, fuel-resistant FKM sealFits:BMW R 1200 GS 2004-2012BMW R 1200 RT 2005-2013BMW R 900 RT 2005-2013BMW R 1200 R 2006-2013 BMW R 1200 GS Adventure 2005-2013BMW R1200 ST 2003-2007BMW R 1200 S 2004-2010 BMW K 1200 S K 1300 S 2003-2015 BMW K 1200 R K 1300 R 2004-2015 BMW K1200 R Sport BMW K 1200 GT K 1300 GT 2004-2010 Important Notes:CPC recommends using:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1-2 more turns!Never screw the thread in completely!With tapered threads, only the first three threads seal! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button may be in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug! Original CPC product from the USA. No Chinese imitation!

Repair Kit for Fuel Pump CPC Quick Coupling Spare Part for Fuel Pump e.g. R1200GS R1200R R1200RT K1200.... see last image This repair kit can be used to repair a leaking or broken connection on the fuel pump. Original CPC with fuel-resistant rubber rings! Quick and easy installation. Scope of delivery: 1 x CPC coupling nut part plastic with shut-off, 3/8" NPT thread, FKM seal 1 x CPC angled connector brass chrome-plated with shut-off, 3/8" hose nozzle, FKM seal Attention important notes:CPC recommends for tapered threads:Teflon tape or liquid sealant for thread sealing!Tighten the coupling by hand and then tighten it with a wrench for a maximum of 1 – 2 more turns!Never fully screw in the thread!With tapered threads, only the first three threads seal anyway! During transport, the release pins on couplings with thumb buttons are often touched.As a result, the thumb button is in the upper position, partially covering the opening.Please make sure to bring the thumb button to the lower position before connecting the plug!

Piston Pin Clip

Return Spring for Clutch Actuation Arm

Delivery time 3-4 weeks BMW K1200S and S1000XR Rider Footpeg - Hydraulically AdjustableSupersport or touring at the push of a button while ridingEvery touring rider who leans into a turn sometimes thinks: “Now the peg should be higher!” And every sport rider wishes, when going on a long tour: “Now the peg should be lower!”.The world's first hydraulic, electrically adjustable supersport rider footpeg - certified by TÜVThe sensational aspect of this footpeg system lies in the ability to make a height adjustment of 45 mm within 0.5-3 seconds - at the push of a button while riding.This means having a comfortable knee angle on straight roads or raising the peg up in sport mode to achieve even more lean angle.You achieve the ergonomics you need for each tour and can thus set the peg higher or lower.The first version with the upper setting is equal to the original footpeg height of your sport bike, while the lower position provides a significantly more relaxed seating position and a more comfortable knee angle.The next version for the extreme sport rider involves splitting the travel, e.g., 22.5 mm - even higher than original and then also 22.5 mm - even lower than original.Your motorcycle will thus become significantly more versatile and, for the first time, adapted to the rider - and that at the push of a button while riding.The adjustable adapter can be installed on almost 80% of all motorcycles, provided there is enough space under the footpeg and no shift or brake lever interferes to lower the footpegs by 45 mm.Here we have installed it on a BMW K1200S and BMW K1200GT 06 All items have been mounted and tested on original motorcycles - without any modifications.

Footpeg Lowering Kit for R1200ST Rider incl. ABE We have now succeeded in providing a lowering kit for the R1200ST rider that does not require the side stand to be removed. The disadvantage we have calculated, that the side stand touches the mounting plate, is intentional and unavoidable. Otherwise, the lowering would not be possible, and it does not affect the lean angle. In this model, the adapters are not adjustable.With the adapters, you achieve a lowering of 30mm.The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, which means that the leg is insufficiently supplied with oxygen, leading to the dreaded varicose veins. Please note that on newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the changed foot position, just as you do in a car.Please consider that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without any modifications.

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: round Mounting Side: right Total Width: 230 mmColor: black Material: metal with Indicator: No E-tested: No

EBC Prolite Brake Disc, Full Floater   EBC replaces the rigid original disc with a Full Floater brake disc. The manufacturing of the complex and expensive Full Floater offers significant advantages when braking. The brake ring, sawed, drilled, and ground from forged HPSR steel bars, can expand freely even during repeated hard braking, such as when descending mountain passes, without deforming. Here, the low carbon content of the used HPSR steel proves beneficial, as it ensures minimal microstructural changes in the steel under the thermal stress of heating and cooling the brake disc in demanding road conditions. An EBC Full Floater brake disc is always a significant gain in safety.   - Brake ring machined from forged HPSR steel with low carbon content. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus maintaining a constant coefficient of friction. - Braking surface drilled with an optimized hole pattern. - Zinc-coated for protection against corrosion. - Hub made of anodized aluminum. - Minimal manufacturing tolerances. - EBC recommends EBC Double-H sintered brake pads for optimal braking performance. - Independent design.Technical Data:Outer Diameter:   260 mmInner Diameter:   62.2 mmBolt Circle:   79 mmNumber of Holes:   5 Hole Diameter:   8.5 mmThickness:   5 mmOffset:   35.8 mmDesign:   floating Manufacturer:   EBC

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: round Mirror Head Diameter: 110 mmMounting Side: right Total Width: 230 mmColor: chrome Material: Steel with Indicator: No E-tested: No

{}

The side fairing on the right side of the BMW S 1000 RR Racing is part of the race fairing kit of the BMW S1000RR Racing. It is mounted via quick fasteners and not compatible with the original street fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   For an effortless mounting the use of the fairing holder kit is necessary. The facts   - racing part. not for street use -  better wind protection - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Tank protector / Knee protection

BMW HP2 Sport Rim - Decorative Stripes in Various Colors Product Description Glossy Rim Decorative Stripes pre-curved 8 mm wide decorative stripes for 19" (inch) rims high-quality vehicle film can be removed without residue at any time resistant to most oils, greases, fuels, aliphatic solvents, weak acids, salts, and alkalis available in various colors (see selection) special colors available upon request NOTE: (not applicable to all decorative sets) the decorative stripes are manufactured directionally (the decoration points left or right in the same direction) Scope of Delivery Rim Decorative Stripes detailed instructions for application

BMW F800S Rim - Decorative Stripes in Various Colors Product Description Glossy Rim Decorative Stripes pre-curved 8 mm wide decorative stripes for 19" (inch) rims high-quality vehicle film can be removed without residue at any time resistant to most oils, greases, fuels, aliphatic solvents, weak acids, salts, and alkalis available in various colors (see selection) special colors available upon request NOTE: (not applicable to all decorative sets) the decorative stripes are manufactured directionally (the decoration points left or right in the same direction) Scope of Delivery Rim Decorative Stripes detailed instructions for application

BMW K1200S Rim - Decorative Stripes in Various Colors Product Description Glossy Rim Decorative Stripes pre-curved 8 mm wide decorative stripes for 17" (inch) rims high-quality vehicle film can be removed without residue at any time resistant to most oils, greases, fuels, aliphatic solvents, weak acids, salts, and alkalis available in various colors (see selection) special colors available upon request NOTE: (not applicable to all decorative sets) the decorative stripes are manufactured directionally (the decoration points left or right in the same direction) Scope of Delivery Rim Decorative Stripes detailed instructions for application