The 4-piece trim kit is required for the Racing trim sides and the 1-piece Racing engine spoiler. This holder kit allows the side panels to be attached via quick release fasteners and attaches the 1-piece Racing engine spoiler to the side of the engine and frame.

The racing rear fairing comes as one part and is mounted with only six screws to the original rear frame. It contains a bulge for the additional available GPS antenna. The needed hole for the cable is also predrilled on the right spot.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly    

The carbon Racing seat for the BMW S 1000 RR Stocksport/Racing (2010-now) can be used along with the series seat pad. This allows the seated position on the vehicle to easily be adjusted with added or less padding. adjusting it to the driver&rsquos needs. Our Racing seat does not require the tail to be modified. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This visor shape was developed for motorsport and is used by many racing teams. The racing visor corresponds to the original visor in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics.

This visor shape was developed for motorsport and is used by many racing teams. The racing visor corresponds to the original visor in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics.

This disc shape was developed for racing and is used by many racing teams. The racing disc corresponds to the original disc in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics.

The 44cm long MRA racing screen features a noticeable elevation in the center of the screen - the so-called "double bubble." It fits perfectly with the overall design of this dynamic racing motorcycle. Available in clear, colorless, and black.  

Die Touratech Radnabenabdeckung besteht aus hochwertig eloxiertem Aluminium und die edle Laserbeschriftung setzt Akzente in Sachen Stil.Darüber hinaus bietet sie effektiven Schutz für die Radnabe Ihrer wertvollen GS.

BMW R1200GS + R1200GS Adventure LC from 2013 Cover frame triangle right frame cover with ABE The triangular frame cover right Carbon replaces the original part using the original Befestigungspunkte.Im focus is on weight reduction (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

Drive Shaft Boot  

Original BMW Accessories for Installation on the Rear Axle Rear Axle Cover Additional Information

This rear Mudgard fits to R 1200 R / RS (LC) modells from 2018!  This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rear Hugger BMW R 1250 R and BMW R 1250 RS starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear hugger for the BMW R 1100 S is attached to the vehicle&rsquos brake calliper bracket using the included screws. We selected the length of the rear hugger to not only help keep the motorcycle clean. but the strut will also appreciate the protection from stone chips. dirt and &ldquosandblasting&rdquo. Installing an effective rear hugger will especially improve the life of the strut&rsquos seals and piston rod. The rear mudguard reduces considerably the amount of dirt and spray thrown up by the rear wheel and provides much needed protection to the shock absorber and the underseat area. Referring to the different models and types of motorcycles. the rear hugger incorporates different stock suspension and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rear Hugger Carbon - BMW R 1200 R (LC) from 2015 and BMW R 1200 RS (LC) from 2015This parts fits to modells from 2015 - 2017!The rear hugger in carbon is fixed on the bike&rsquos cardan housing by using 3 screws. This screw connection is so ingenious and easy that we patented it by the german patent office. The specially designed rear hugger reduces considerably dirt and spray thrown up by the rear wheel and considers standard chassis and tire sizes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice.You can find a 360° video of our part in the category product videos!The part is made completely out of pre-preg carbon fibre materials using an autoclave. We use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon rear hugger for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) replaces the original part using the original mounting points. The chain guard is already incorporated into this rear hugger. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon rear hugger for the BMW S 1000 RR replaces the original part using the original mounting points. The chain guard is already incorporated into this rear hugger. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The rear light cover without handgrip openings offers an elegant method for removing the pillion handle for 1-person use. This carbon piece eliminates the unused openings from removing the pillion handles. The rear light cover without handgrip openingis in carbon for the BMW K/R models is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Vehicle-Specific Information: for Sachs ForkMachined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw. The length of the damper is adjustable by +-5mm.   The adjustment tool is included in the delivery.  

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application