Mahle Air Filter Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions. With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service life - even under extreme conditions such as heat, cold, or chemical influences. Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the change intervals prescribed by the motorcycle manufacturers.

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

The front fairing center piece in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The air channel connects the upper fairing with the airbox. It is needed for a correct fitment of the upper fairing and also to ensure that the ram air can work correctly.  For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - with German ABE - only for solo riding - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Airintake Channel fits to BMW S 1000 RR starting from 2019. and BMW M 1000 RRThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

The flagship of the Akrapovic exhaust systems, used and tested in motorcycle racing by our top factory teams. It is simply the best exhaust system available. Each model is unique and has been developed with the goal of maximizing engine performance while reducing overall weight to optimize the handling of the entire motorcycle. It is made entirely of titanium. The unique shape of the silencer with its embossed print, which runs throughout the exhaust system and seamlessly transitions into the handcrafted carbon end cap, elevates the design to a new level.For perfect performance, throttle response, and durability, a reprogramming of the control unit is recommended.The product photo shows the system along with the optionally available carbon heat shield (P-HSB10E3). The carbon silencer bracket (which is needed for installation if the passenger footpegs are removed) is already included in the system.Evolution Line (Titanium) exhaust system is also compatible with BMW M1000RR models.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

The optional aluminum bracket is required for the installation of the Evolution Line in titanium (S-B10E9-APLT), Racing Line in titanium (S-B10R4-APLT), and the Slip-On Line (Carbon) S-B10SO10-ZC, on motorcycles equipped with the racing subframe produced and distributed by Alpha Racing with the product code 46 DA0 0202.

Sports Exhaust High-End in perfection: The high-quality slip-on exhaust made of titanium with a carbon end cap delivers a powerful sound and sporty appearance. Additionally, the sports exhaust developed with Akrapovič is optimized for weight compared to the stock exhaust. Powerful sound and sporty appearance Weight optimization High-quality high-end product Street legal (EU-ABE)

If passenger footrests are removed, this optional carbon fibre muffler bracket is needed.

Optional available silencer mount for use on the exhaust systems of the Slip-On Line (Carbon)(S-B10SO10-ZC). Passenger footpegs must be removed. Handcrafted from carbon from motorsport. Beautifully designed for an even more captivating appearance of the bike and exhaust system.

With additional available headers made of the finest stainless steel, you can expand your Akrapovic Slip-On exhaust system into a complete system. Make your bike something special – with more power, beautiful design, and the unique Akrapovic sound. THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

With additional available headers made of the finest stainless steel, you can expand your Akrapovic Slip-On exhaust system into a full system. Make your bike something special – with more power, beautiful design, and the unique Akrapovic sound.Optional headers are also compatible with Akrapovič standard (factory-installed) / BMW accessory Akrapovič mufflers and the BMW M1000RR model.For perfect performance, throttle response, and durability, a reprogramming of the control unit is recommended.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

With additional available headers made of the finest titanium, you can upgrade your Akrapovic Slip-On exhaust system to a full system. Make your bike something special – with more power, beautiful design, and the unique Akrapovic sound.Optional headers are also compatible with Akrapovič standard (factory-installed) / BMW accessory Akrapovič mufflers and the BMW M1000RR model.For perfect performance, responsiveness, and durability, remapping is recommended.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

The Racing Line marks a significant step in tuning an exhaust system and offers an excellent balance between price and optimal performance. Racing performance exhaust systems are designed for riders who expect maximum performance from their motorcycle. The systems are lighter than the stock exhausts and impress with outstanding quality, as well as increased engine power combined with pure racing sound.For perfect performance, throttle response, and durability, the use of the specially developed mapping from Dynojet is recommended. More information can be found at http://www.powercommander.com/powercommander. THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

The Racing Line represents a significant step in tuning an exhaust system and offers an excellent balance between price and optimal performance. Racing performance exhaust systems are designed for riders who expect maximum power from their motorcycle. The systems are lighter than the stock exhausts and impress with outstanding quality, as well as increased engine performance combined with pure racing sound. The unique shape of the silencer, with its embossed print that runs throughout the entire exhaust system and seamlessly transitions into the handcrafted carbon end cap, elevates the design to a new level.For perfect performance, throttle response, and durability, a reprogramming of the control unit is recommended.The product photo shows the system along with the optionally available carbon heat shield (P-HSB10E3). The carbon silencer mount (which is needed for installation if the passenger footpegs are removed) is already included in the system.The Racing Line (Titanium) exhaust system also fits BMW M1000RR models.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with increased power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. We place great importance on design – resulting in a beautifully crafted exhaust system with numerous carbon components. Race-tested materials.

Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with increased power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. We place great importance on design – resulting in a beautifully crafted exhaust system with numerous carbon components. Race-tested materials.If the passenger footpegs are removed, an optional carbon muffler mount is required.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with increased power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. We place great importance on design – resulting in a beautifully crafted exhaust system. The muffler casing is made of titanium, and the end cap is made of carbon. Race-tested materials.

Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with increased power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. The GP-styled slip-on line system is a high-performance setup for race-oriented riders. Made from titanium, a race-proven material. The modification of the exhaust system results in a significant power boost and weight savings. In combination with optional headers, the noise level is 112.7 dB at 6500 rpm.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

We place great importance on design – resulting in a very stylishly shaped, black coated silencer. Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Installation is quick and easy. The design effects speak for themselves, and the power output is improved. Additionally, the slip-ons enhance the sound as well. Make your bike something special – with more power, beautiful design, and the unique Akrapovic sound.The exhaust system is compatible with BMW side cases.

All Balls Racing tapered roller bearing set for steering head / wheel bearing set   Note: Steering head bearing set only for GasGas, wheel bearing set only for BMW!   - includes all bearings and seals required for installation - high-quality OE replacement for ball bearings or direct replacement for tapered bearings - specially designed sealing lips that protect against dirt and water, while keeping the bearing grease clean  

The carbon alternator cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) with partially attached using the alternator cover screws. and in the front area also glued on using a small dot on the alternator cover. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Chain Cover Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.