Fairings & Paint Protection Film

The 1-piece carbon upper front fairing for the BMW S 1000 RR from 2015 replaces the original part using the original mounting points. The upper section is a 1-piece version. the centre trim piece is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece front fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!You can find a 360° video of our part in the category product Videos!This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Instrumentholder for the S1000RR Racing 2023 is part of the Race Fairing of the BMW S 1000 RR since 2023. It enables the possibility to use quick fasteners on the carbon front fairing. It also protects the cockpit below better than the original part while saving weight.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   The part can be mounted on the original mounting points.  The facts   - racing part. not for street use - improved protection of the cockpit below - preparation for the use of quick fasteners - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly  

Front Fender Racing BMW S 1000 RR Race 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Fender Superbike fits to BMW S 1000 RR starting from MY 2019 and BMW M 1000 RRRacingpart - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fender in carbon for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fender in carbon for the BMW S 1000 RR Stocksport/Racing (2010-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The fender of the M1000RR is much more than just a fender. It elegantly combines the function of previously three components in a single one. The integrated air ducts constantly supply fresh air to the brake calipers while riding to reduce the risk of brake fade. Tested under the toughest conditions. it helps achieve success in the world's most diverse racing series. It already helped the Tecmas Stock Team to a commanding victory at the legendary 24h of LeMans. But the fender cuts a fine figure not only on the race track. but also on the road. But so that not only the new M models benefit from the additional cooling. we looked for a way to make the fender compatible with other models. too. The ABE therefore covers not only the new BMW M1000RR. but all current four-cylinders of BMW. To benefit even more from the aerodynamic advancements on the front wheel. the rear flap prepares the additional mounting of the wheel covers.  Through the long continuation of the side surfaces to the rear. not only the air resistance is reduced when driving. but also the sensitive lower fork tubes for the first time reliably protected from stone chips.   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The Racing 1-piece carbon top trim for the BMW S 1000 RR from 2015 is not only compatible with our Racing trim but can also be combined with the series side fairing. This only requires two additional holes to be tapped in the side of the upper piece. Our Racing front fairing fits also with the original windshield. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Race Fairing (1 piece) fits to BMW S 1000 RR starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Racing 1-piece carbon top trim for the BMW S 1000 RR is not only compatible with our Racing trim but can also be combined with the series side fairing. This only requires two additional holes to be tapped in the side of the upper piece. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. This part fits to bikes with ABS. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Die Ritzelabdeckung in Carbon für die BMW S 1000 RR ab 2015 ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte. Die Ritzelabdeckung ist für Modelle mit ABS geeignet. Im Vordergrund stehen Gewichtsersparnis (in der Regel Einsparung von ca. 70% im Vergleich zum originalen Bauteil) und höhere Steifigkeit. Das Carbonteil wurde nach den neuesten Richtlinien im Autoklaven komplett aus Prepreg (siehe FAQ) Material gefertigt und im nächsten Schritt. wie bei uns üblich. zum Schutz gegen Umwelteinflüße mit einer klaren Kunststoffbeschichtung überzogen. Diese Kunststoffbeschichtung übertrifft den sonst üblichen Klarlacküberzug in der Schutzwirkung. Kratzfestigkeit und Beständigkeit enorm. Aber nicht nur technisch kann die Beschichtung punkten. sondern sie unterstreicht auch die dreidimensionale Wirkung der Carbonstruktur nochmals deutlich.

The heel guard in carbon for the BMW S 1000 RR (from 2015) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The heel guard in carbon for the BMW S 1000 RR (from 2015) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon ignition rotor cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is attached to the engine using the 4 original screws. The lower section of the ignition rotor cover is designed as thick as possible to provide the most effective engine cover protection possible in the event of an accident. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The carbon number plate holder for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) replaces the original part using the original mounting points. It is slightly shorter than the original part. This makes the motorcycle&rsquos tail seem a bit taller. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The HP Carbon Wheel Cover protects both the rider and the machine – and emphasizes the bike's dynamics with its high-gloss finish, providing the perfect sporty look. The high-quality carbon construction also makes the cover particularly impact-resistant while simultaneously reducing the overall weight of the machine. High-quality cover for the rear wheel. Reduces the weight of the machine. Painted with UV-resistant high-gloss lacquer. Particularly impact-resistant. Perfectly matched to the other HP accessories.

With the self-adhesive HP label, the HP carbon parts can be further customized as desired. The silver lettering on a black background measures 22 x 9 mm. Self-adhesive HP label for customization. Dimensions: 22 x 9 mm.

This is a used part!Vehicle: S1000R Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 46627715968

The new S1000RR from 2019 impresses with its noticeable dynamics, which is reflected in its overall appearance. The original windscreen (41cm long) from MRA is designed to resemble the original screen from BMW and is available in clear, smoke gray, and black.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application