Fairings & Paint Protection Film

The 1-piece side fairing for the BMW S 1000 RR from 2015 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter! TÃœV Approved Quality This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon side fairing for the BMW S 1000 RR replaces the original piece using the original mounting points. On these carbon parts the upper part of the trim side fairing (plaque brackets) is manufactured as a single piece with the side fairings. separate plaque brackets are not required for our side fairings. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon side fairing for the BMW S 1000 RR replaces the original piece using the original mounting points. On these carbon parts the upper part of the trim side fairing (plaque brackets) is manufactured as a single piece with the side fairings. separate plaque brackets are not required for our side fairings. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing on the left side of the BMW S 1000 RR Racing is part of the race fairing kit of the BMW S1000RR Racing. It is mounted via quick fasteners and not compatible with the original street fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. For an effortless mounting the use of the fairing holder kit is necessary. The facts   - racing part. not for street use - better wind protection - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The side fairing in carbon for the BMW S 1000 RR from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW S 1000 RR from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Fairing Side Panel Racing left BMW S 1000 RR starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The badge holder in carbon for the BMW S 1000 RR Straße (2010-2014) / HP 4 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The upper part of the side fairing in carbon for the BMW S 1000 RR (2015 - ) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÃœV Approved Quality

The carbon winglet for the BMW S 1000 RR Straße (2012-2014) / HP 4 replaces the original piece using the original mounting points. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon side winglet for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) replaces the original piece using the original mounting points. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The carbon frame for the BMW S 1000 RR Stocksport/Racing (2012-2014) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR Stocksport/Racing (2012-2014) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360° Video with the both Frame covers for the BMW S 1000 RR 2015. You will find the Video at Product Videos above this description. - The carbon frame cover for the BMW S 1000 RR Stocksport/Racing (from 2015) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360° Video with the both framecovers (left and right side) for the BMW S 1000 RR under Product Videos above! - The carbon frame for the BMW S 1000 RR (from 2015) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look at the 360° Video from the framecovers left and right for the BMW S 1000 RR. You can find it under Product Videos above this description. - The carbon frame for the BMW S 1000 RR (from 2015)) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360° Video of the Frame covers for the BMW S 1000 RR from 2015. You will find it under Product Videos above this description. - The carbon frame for the BMW S 1000 RR Stocksport/Racing (from 2015) are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon frame for the BMW S 1000 RR are attached to the frame using the adhesive strips from the carbon parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The 1-piece carbon upper trim for the BMW S 1000 RR replaces the original part using the original mounting points. The upper section is a 1-piece version. the centre trim piece is already incorporated into the carbon part. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon front fairing for the BMW S1000RR Racing is part of the racing fairing for the BMW S 1000 RR since 2023. It sis designed to be mounted with quick fasteners and not compatible with the original street fairing parts.  The upper mounting points on the instrument holder are the same as original and can be used. We recommend the usage of the carbon instrument holder.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   For an effortless mounting the fairing holder kit is necessary. The shown windscreen is only for illustration and not included.    The facts   - racing part. not for street use - improved wind protection - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly