Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: in combination with the original luggage bridge.

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle a unique character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions Scope of delivery: right + left including mounting materials and instructions any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes no ABE or registration required

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but rather in the side cases or tank bag. Recommended maximum speed: 130 km/h Designed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

Secure Hepco&Becker aluminum protection for the cardan shaft. Bent and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points Includes mounting materials and instructions

Hard-shell plastic cases, splash-proof Total volume: approx. 63 l (right approx. 31 l, left approx. 32 l) The larger left case comfortably fits 1 helmet. Case lid painted in granite gray metallic matte Extension at the bottom of the case facilitates loading and unloading Case lockable, vehicle key compatibility possible Maximum load per case: 10 kg Recommended maximum speed with cases: 180 km/h Weight (per case): approx. 3.8 kg Discreet case holders that do not interfere when cases are removed Case holders also available as special equipment (from factory) Optional: Waterproof inner bags for touring cases Scope of delivery: Delivery without case holders and without locking cylinder NOTE:       Color in the illustration may vary,       as we do not yet have images for all colors!

Hard-shell plastic cases, splash-proof Total volume: approx. 63 l (right approx. 31 l, left approx. 32 l) The larger left case comfortably fits 1 helmet. Case lid painted in granite gray metallic matte Extension at the bottom of the case facilitates loading and unloading Case lockable, vehicle key synchronization possible Maximum load per case: 10 kg Recommended maximum speed with cases: 180 km/h Weight (per case): approx. 3.8 kg Discreet case holders that do not interfere when cases are removed Case holders also available as special equipment (from factory) Optional: Waterproof inner bags for touring cases Scope of delivery: Delivery without case holders and without locking cylinder NOTE:       Color in the image may vary,       as we do not yet have images for all colors!

Das wasserdichte Kunststoff-Topcase bietet mit 30 Liter Volumen genug Platz für einen Helm. Der wahlweise in Asphaltgrau metallic matt, Blackstorm metallic oder Lightwhite uni lackierte Deckel und die Soft-Close-Scharniere, die ein sanftes Absenken des Deckels ermöglichen, unterstreichen den hochwertigen Qualitätseindruck. Die maximale Zuladung beträgt 5 kg. Bitte wählen Sie Ihre Farbe. Bei Fragen kontaktieren Sie uns gern! Inklusive Schließzylinder und BMW Logo Plakette. Der Schließzylinder kann mit wenigen Handgriffen auf Ihren Fahrzeugschlüssel angepasst werden! Sie bekommen hier ein komplett anbaufertiges BMW Topcase!

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Left Cover Next to the Cockpit - BMW R 1200 RS (LC) from 2015. The inner cover on the left in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg material (see FAQ) and, as is customary with us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Right Cover Next to the Cockpit - BMW R 1200 RS (LC) from 2015. The inner cover on the right in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part has been completely manufactured according to the latest guidelines in an autoclave from prepreg (see FAQ) material and, as is customary for us, coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: in combination with the original luggage bridge.

electrically adjustable motorcycle handlebar on a BMW R1200RS LC From now on, during your ride, you can adjust it at the push of a button, using two electric motors with planetary gears. Depending on your tour and comfort, you can adjust the handlebar of your R1200RS LC continuously up to 70mm towards you and back. With the adjusted position, you no longer have to lean uncomfortably towards the handlebar, but can sit upright and switch back to a reclining position in seconds during sporty rides. This way, you ride two different motorcycles and can enjoy every ride without restrictions. By combining the E-handlebar with the electrically hydraulic footrest, every tour becomes significantly more relaxed. without ABE

BMW R1200RS LC Carbon slipstream deflector left R 1200 RS LC item Description Verkleidungswinglet left - BMW R 1200 RS (LC) from 2015 onwards. The slipstream deflector left carboxylic replaces the original device using the original fastening points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

BMW R1200RS LC Carbon slipstream deflector right R 1200 RS LC item Description Verkleidungswinglet legal BMW R 1200 RS (LC) from 2015 onwards. The slipstream deflector right into Carbon replaces the original part using the original mounting points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Footpeg Lowering Kit BMW R1200R LC 2015 R1200RS LC R1250R R1250RSFootpeg lowering kit for the rider.Includes ABETo individually enhance sitting comfort, we have developed this footpeg lowering kit for the BMW R1200R LC and the BMW R1200RS.Perhaps you have already experienced discomfort in your knees and groin during a longer tour.With our modifications, you can enjoy the legroom that corresponds to your height.The footpeg is lowered by 40 mm, aligning with the natural ergonomics and sitting position.During off-road rides, the footpeg can be quickly swapped for the original one.Please note that ground clearance is limited with our footpeg lowering kit.The advantage of this adapter is that the original footpeg is retained.Scope of delivery: Kit for both sides.Includes extension for the brake lever All items have been mounted and tested on original motorcycles - without aftermarket modifications.

The front fender in carbon for the BMW R 1200 R (LC) from MY 2015 and BMW R 1200 RS (LC) from 2015 is a direct replacement for the original component. This fender is designed bigger on the rear side as the original one. to reduce spray of dirt and water to the engine. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance..

Front Silencer Protector Carbon - BMW R 1200 R (LC) from 2015 / BMW R 1200 RS (LC) from 2015 The front exhaust cover in carbon is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Mounting bracket / base mount for the zumo 340/ 345/ 350/ 390/ 395 for attachment to the motorcycle.Replacement mounting bracket compatible with the zumo 340/ 345/ 350/ 390/ 395. - To attach to the handlebar, you will need "optional" accessories from RAM and/or our Touratech handlebar mount.- With the optional Garmin connection cable (01-065-0418-0), the zumo 340/ 345/ 350/ 390/ 395 can also be connected to the electrical system of your motorcycle.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Handbremsarmatur HBZ vorn Handbremshebel für BMW R1200GS LC R1250GS + Adv. RT RS R RnineT Angeboten wird hier ein GebrauchtteilFahrzeug: R1200R LC, R1250R, R1200RS, R1250RS, R1200GS LC, R1250GS, R1200GS LC Adventure, R1250GS Adventure, R1200RT LC, R1250RT, RnineT (K21) Hersteller: BMWNeupreis: 454,88 € Zustand: kaum Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 32728559604, 32728526541 Nummer auf dem Bauteil: 8 553 933

Handlebar riser and handlebar adapter with offset for BMW R1200RS LC and R1250RS LCincluding ABEOur cleverly and elaborately machined handlebar adapters and handlebar risers with offsetnot only raise the handlebar 20 mm higher, but - which is particularly advantageous - also bring it 35 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.The conversion time is only about 10 minutes. The original navigation screws from BMW are still used.All cables are long enough for your BMW R1200RS LC and R1250RS LC.However, the clutch line needs to be rerouted. It is removed at the clutch reservoir without any fluid leaking out. Then pull the line out from below and reroute it back up and reattach it.There is a slightly hidden cable tie in the lower area that also needs to be removed.The adapters are anodized to match the original.All items have been mounted and tested on original motorcycles - without any aftermarket modifications.