Engine protection & engine accessories

BMW R1200 GS R RS RT LS K50 Sliding Protection for Valve Cover Protection Plastic sliding protection for original BMW stainless steel valve cover protection 1 set = R + L Replacement for the original sliders.

Easy to install + lightweight + high protectionWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick silver anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5132!

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Set

The cylinder head cover protection is made of stainless steel and offers comprehensive protection against scratches and stone impacts. Plastic grinding protection on the outside, replaceable Large rubber buffer on the inside BMW Motorrad logo on the grinding protection Not compatible with engine protection bars or left/right engine protection bars Material: Stainless steel

Rocker Cover (Right) Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 - This carbon rocker covers are very strong. but have a total of less than 500 gramms each. They not only give the hightech watercooled BMW boxer. the absolute hightech look. they do the best job in protecting your bike! - This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rocker Cover Cover (Right) Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Spark Plug Cover left Side Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Spark Plug Cover right Side Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick black anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5133!

Brilliant and elegant - beautiful protection against foreign substances in the oil circuit of your R1250/R1200.Made of aluminum, CNC-machined, anodized, and with an integrated hexagon for opening.The plug is simply installed in place of the original plastic part and can then only be opened with a TORX50 key. This makes easy disassembly more difficult, yet quick maintenance remains no problem. (Torx bit is not included)

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1200GS LC Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet,Kratzer und Abschürfungen Teilenummer: 77148533745

ZylinderschutzSW-MOTECH baut diesen Zylinderschutz passend für die BMW R 1200 Modelle. Die Protektoren fügen sich nahtlos in das Design des Motorrades ein.Wer seinen Boxer liebt, der schiebt (hoffentlich nur selten). Damit das so bleibt, gönnen wir ihm eine Extraportion Schutz. Diese maßgeschneiderten Schutzelemente fügen sich nahtlos in das Design der BMW ein und schützen die Boxer-Ventildeckel bei Steinschlag und Stürzen. Die Protektoren lassen sich leicht – mit nur drei Schrauben pro Seite – an bestehenden Anbaupunkten montieren. Der Zylinderschutz besteht aus einer gelaserten Alu-Unterkonstruktion und einem CNC-gefrästen Alu-Schleifpad. Zusätzlich verfügt er über eine Gummidämpfung auf der Innenseite.Set mit zwei Protektoren für beide Boxer-VentildeckelCNC-gefräste, eloxierte Aluminium-SchleifpadsMit integrierter GummidämpfungEinfache Montage am original RahmenLieferumfang2 x Zylinderschutz, rechte und linke SeiteMontagematerialDetailsMaterial: AluminiumFarbe: schwarzGesamtgewicht: ca. 0,8 kg