EBC Prolite Brake Disc, Full Floater   EBC replaces the rigid original disc with a Full Floater brake disc. The manufacturing of the complex and expensive Full Floater offers significant advantages when braking. The brake ring, sawed, drilled, and ground from forged HPSR steel bars, can expand freely even during repeated hard braking, such as when descending mountain passes, without deforming. Here, the low carbon content of the used HPSR steel proves beneficial, as it ensures minimal microstructural changes in the steel under the thermal stress of heating and cooling the brake disc in demanding road conditions. An EBC Full Floater brake disc is always a significant gain in safety.   - Brake ring machined from forged HPSR steel with low carbon content. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus maintaining a constant coefficient of friction. - Braking surface drilled with an optimized hole pattern. - Zinc-coated for protection against corrosion. - Hub made of anodized aluminum. - Minimal manufacturing tolerances. - EBC recommends EBC Double-H sintered brake pads for optimal braking performance. - Independent design.Technical Data:Outer Diameter:   260 mmInner Diameter:   62.2 mmBolt Circle:   79 mmNumber of Holes:   5 Hole Diameter:   8.5 mmThickness:   5 mmOffset:   35.8 mmDesign:   floating Manufacturer:   EBC

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: round Mirror Head Diameter: 110 mmMounting Side: right Total Width: 230 mmColor: chrome Material: Steel with Indicator: No E-tested: No

Lock nut including wave washer   Stainless steel   Dimensions: - Outer: 19.5mm - Inner: 4mm - Height: 14mm  

Vehicle-Specific Information: Flat HandlebarStainless Steel Mirror   - reducing   Mirrors for vehicles registered before July 1, 2000 do not require an E-mark. A mirror surface area of 60cm² is sufficient.Technical Data:Usage: Vehicle-specific Mirror Type: Stem Mirror Mounting: M8 right Mirror Head Shape: round Mirror Head Diameter: 110 mmMounting Side: left Total Width: 230 mmColor: chrome Material: Steel with Indicator: No E-tested: No

  Rubber Band   Original Spare Part

Rubber Grommet Speedometer Cable

Cap S Fairing

Brake disc screw - OE spare M8x1,25x75

Felt Seal Brake Shoe

Seal for ATE brake caliper for 40mm piston

Athena Dust Cap Gasket   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Piston rod seal

ARI Fork Seal Set   The quality of their execution is matched by the unique nature of the material used (XNBR).   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperatures     ARI fork seals meet OE quality in both quality and dimensions. This results in the best possible sealing under all road and climate conditions. The fork seals are suitable for daily use, motorsport, or even classic vehicles.Technical Data:Inner Diameter:   36 mmOuter Diameter:   46 mmInstallation Height:   7 mmTotal Height:   9 mmManufacturer:   ARI

JMP Fork Seal Set   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperatures

Fuel Cap Seal

Oil Seal Corteco   Corteco seals in original quality are characterized by their outstanding sealing properties and a long service life.Technical Data:Inner Diameter:   17 mmOuter Diameter:   28 mmWidth:   7 mm

Oil Seal Athena These are of higher quality than the OEM seals and guarantee remarkable performance and resistance to high temperatures and wear.Technical Data:Inner Diameter:   22 mmOuter Diameter:   35 mmWidth:   5 mm

Oil Seal Corteco   Corteco seals in original quality are characterized by their outstanding sealing properties and a long service life.Technical Data:Inner Diameter:   22 mmOuter Diameter:   35 mmWidth:   8 mm

  Oil SealTechnical Data:Inner Diameter:   28 mmOuter Diameter:   55 mmWidth:   9 mm

Oil Seal Corteco   Corteco seals in original quality are characterized by their outstanding sealing properties and a long service life.Technical Data:Inner Diameter:   16 mmOuter Diameter:   26 mmWidth:   7 mm

Athena Fork seal kit - Dimensions: 36X46X7 / 9 mm

Fahrzeugspezifische Information:  Ab 01.09.1980 SACHS Sintermetall-Kupplungen für BMW Motorräder    ·         Aufgesinterte Reibflächen, ohne Nieten ·         Außerordentlich hoher Reibwert für eine punktgenaue Leistung ·         Hervorragende Temperaturableitung und überaus belastbar   Anspruchsvolle Fahrer einer BMW mit Boxermotor werden die neue SACHS Sintermetall-Kupplung schätzen! Sie überzeugt selbst bei extremer Belastung mit ihrer ausgezeichneten Wärmeableitung und Temperaturbeständigkeit. Ihre Reibflächen werden im Sinterverfahren aus einer speziell abgestimmten Mischung von Metallpulvern hergestellt. Sie weisen eine extrem griffige, besonders verschleißfeste Oberfläche auf und sind präzise mit engsten Toleranzen geformt. Nieten kommen nicht zum Einsatz. Die Reibflächen werden im Sinterverfahren fest mit der Scheibe verbunden. Daraus resultieren eine perfekte Geometrie und die optimale Stärke der Pads.   Das Material der Reibflächen hat sich im internationalen Rennsport bereits vielfach bewährt. Es weist einen um etwa 40% höheren Reibwert auf als organische Produkte und erbringt die Leistung auf den Punkt. Die neue SACHS Sintermetall-Kupplung ermöglicht die Übertragung eines höheren Drehmoments und überzeugt mit ihrer langen Lebensdauer.

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

Swingarm Bearing Sleeve