The front fairing for the BMW M1000RR Racing is part of the race fairing kit of the BMW M1000RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts.   The Winglets are screwed directly to the front fairing and it can be taken off as a three part unit within seconds. In contrast to the 2022 model the wind drag on the rider is reduced and the big surface on front allows an easy mounting of the starting number.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. If the fornt fairing should be mounted on the original fairing holder an aditional holder is needed. The holder also includes the preperation for the use of quick fasteners. If needed. just write a short ­e-mail and we put the holder to the package without additional costs.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Front Fender Racing BMW S 1000 RR Race 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Fender Superbike fits to BMW S 1000 RR starting from MY 2019 and BMW M 1000 RRRacingpart - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The fender of the M1000RR is much more than just a fender. It elegantly combines the function of previously three components in a single one. The integrated air ducts constantly supply fresh air to the brake calipers while riding to reduce the risk of brake fade. Tested under the toughest conditions. it helps achieve success in the world's most diverse racing series. It already helped the Tecmas Stock Team to a commanding victory at the legendary 24h of LeMans. But the fender cuts a fine figure not only on the race track. but also on the road. But so that not only the new M models benefit from the additional cooling. we looked for a way to make the fender compatible with other models. too. The ABE therefore covers not only the new BMW M1000RR. but all current four-cylinders of BMW. To benefit even more from the aerodynamic advancements on the front wheel. the rear flap prepares the additional mounting of the wheel covers.  Through the long continuation of the side surfaces to the rear. not only the air resistance is reduced when driving. but also the sensitive lower fork tubes for the first time reliably protected from stone chips.   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Passgenaue Lackschutzfolie in schwarz glänzend schützt zuverlässig vor Kratzern im Lack problemlose Selbstmontage durch genaue Passform kein Schneiden mit der Schere oder Cuttermesser nötig jederzeit rückstandslos zu entfernen wetter- und UV-beständig Lieferumfang Lackschutzfolienset ausführliche Anleitung zum Verkleben

Essential on the racetrack, the M brake lever protector also makes a clear statement on the road in terms of uncompromising sportiness. The curved bracket made of aluminum and plastic protects the brake lever on the handlebar from being unintentionally activated upon contact with another vehicle, thus preventing accidents caused by a locked front wheel. The dynamic design with the M logo perfectly complements the rest of the M accessories. High-quality protection for the brake lever. Bracket made of aluminum and plastic. With laser-engraved M logo, two-tone (black/silver). Perfectly matched to the design of the motorcycle. Compatible with the clutch lever protector. Delivery includes: one protector.

The M clutch lever protector makes a clear statement on the road with its dynamic look, showcasing uncompromising sportiness. The curved bracket made of aluminum and plastic protects the clutch lever on the handlebar and is the perfect complement to the M brake lever protector. High-quality protection for the clutch lever. Bracket made of aluminum and plastic. Two-tone (black/silver) with laser-engraved M logo. Perfectly matched to the design of the motorcycle. Compatible with the brake lever protector. Scope of delivery: one protector.

BMW Motorrad Batterieladegerät Plus Das Batterieladegerät Plus ist ideal für konventionelle, wartungsfreie Akkus wie Gel-, Lithium-Ionen und AGM-Batterien geeignet. Es bietet eine prozessorgesteuerte Ladung und Ladeerhaltung und kann bequem über die Motorradsteckdose oder ein Adapterkabel genutzt werden. Dank integriertem Kurzschluss-, Verpolungs- und Überlastungsschutz ist ein sicherer Betrieb gewährleistet. Die kompakten Abmessungen (L x B x H) von 135 x 120 x 50 mm machen es einfach zu transportieren und verstauen.Wie auch schon beim Vorgänger ist dieses Ladegerät natürlich CAN-Bus fähig. D.h. der Zugang über die Bordsteckdose bleibt erhalten, auch wenn die Zündung komplett ausgeschaltet ist.Die Fahrzeugbatterie in Eurem BMW Motorrad wird es Euch danken! Was gibt es nervigeres als im Frühjahr wegen eine platten Batterie nicht starten zu können. Ihr braucht nur eine 220V Steckdose. Dann über di Bordsteckdose oder direkt an der Batterie anklemmen und vergessen! Fertig! Den Rest regelt das Ladegerät!

With the BMW ConnectedRide Navigator, all tours and plans are always with you. Through the BMW ID, planned routes and recordings can be synchronized with the BMW Motorrad app. The 5.5-inch touch display is easily readable even in direct sunlight. The operation is intuitive via the multi-controller. Always up-to-date maps and routes thanks to updates directly on the device Synchronization with personal routes, plans, and recordings Seamless smartphone integration Optimal readability of the touch display Intuitive operation via multi-controller Includes two USB-C charging cables Can be used in conjunction with navigation preparation Dimensions: 150 x 83 x 19 mm Weight: 309 g Color: Black

M Performance Parts M Motorcycle Mat An exclusive spot for your own machine: The M Motorcycle Mat not only impresses with its attractive design, but it also reliably protects the floor from dirt as well as oil and gasoline stains. Another advantage is the slip-resistant and flame-retardant material composition. The practical mat measures 250 x 105 cm. Attractive under-mat Protection of the floor from oil and gasoline stains Slip-resistant and flame-retardant Meets FIM guidelines and can be used in races Size: 250 x 105 cm

The aerodynamically optimized tank bag, 10 l from BMW Motorrad with strap connection, integrates perfectly into the racing design of the machine and stays securely in place thanks to its anti-slip coating. The robust polyester tank bag features a storage compartment in the lid as well as a large main compartment with a waterproof, removable inner bag that can be closed with a roll closure. The 6 liters of luggage volume can be expanded up to 10 liters if needed by a surrounding zipper. The bottom, side walls, and lid are reinforced, keeping the tank bag absolutely shape-stable even when empty. A sporty appearance is guaranteed both with and without luggage. High-quality tank bag made of polyester. Custom-fit, secure attachment with tension straps. Optimal integration into the racing design of the machine. Waterproof, removable inner bag with roll closure. Cable passage for smartphone charging cable. Anti-slip base plate for secure hold.

The self-adhesive tank pad reliably protects the tank from scratches on the paint and impressively emphasizes the racing look of the motorcycle with its dynamic shape. It is coated with a scratch-resistant, UV-resistant protective layer that makes the pad insensitive to all external influences, whether for road use or the tough demands of the racetrack. It withstands temperatures from -10 °C to +80 °C, is moisture and water-resistant, and does not yellow even after many kilometers. Thanks to its extra-strong adhesive properties, it adheres absolutely reliably even under heavy stress, effectively protecting the tank from abrasion caused by motorcycle clothing. In addition to its protective function, the tank pad also impresses with its design perfectly tailored to the look of the machine, providing an individual visual enhancement. Adhesive pad to protect the tank from scratches. Extra-strong adhesive properties and rounded edges. Strong, UV-resistant protective layer. Scratch-resistant and protected against yellowing. Perfectly matched to the racing design of the motorcycle. Heat, moisture, and water-resistant. Additional Information

PRO Micro TankrucksackDezent und geradlinig: Der PRO Micro passt auf fast jeden Tank und transportiert sicher die kleinen Notwendigkeiten wie Fahrzeugpapiere und Wertsachen. Wie alle PRO Tankrucksäcke sitzt der Micro auf einer EVA-Kunststoff-Basis, die hohe Formstabilität garantiert. Mit Hilfe eines Reißverschlusses kann das Volumen des Tankrucksacks erweitert werden.Die PRO Tankrucksäcke bieten elegantes und zeitloses Design in Verbindung mit langlebigen Materialien und durchdachten Produkteigenschaften: Ballistic Nylon schützt das Gepäck vor Stößen, Wind und Wetter. Die Oberseite aus laminiertem EVA-Material gibt den Taschen eine markante Form und gewährleistet in Verbindung mit einem MOLLE-Aufsatz sicheren Halt für Smartphone- und Tablethalter. Die bereits ab Werk befestigte Führungsschiene des Oberrings erlaubt eine deutlich vereinfachte Anpassung des Tankrucksacks an die Form des Tanks und die ergonomischen Bedürfnisse des Fahrers. Diese Flexibilität bieten nur die PRO Tankrucksäcke. Passend dazu bietet SW-MOTECH die patentierten PRO Tankringe aus glasfaserverstärktem Kunststoff. Sie werden abgestimmt auf das Motorradmodell gefertigt. Der robuste PRO Tankring mit magnetischer Führungshilfe sichert die PRO Tankrucksäcke durch einen mechanischen QUICK-LOCK Rastverschluss. So lassen sich die Tankrucksäcke mit nur einem Handgriff befestigen oder abnehmen.Volumenerweiterung per Reißverschluss von 3 auf 5 LiterDer erforderliche PRO Tankring ist NICHT im Lieferumfang des PRO Tankrucksacks enthalten. Bitte verwende den Bike-Filter, um den richtigen PRO Tankring für Ihr Motorrad auszuwählen.Magnetische Führungshilfe im PRO Tankring für einfache BefestigungVormontierte Führungsschiene des Oberrings für ergonomische Anpassung des TankrucksacksOberseite und Boden des Tankrucksacks aus laminiertem und formstabilem EVA-MaterialAus robustem und besonders UV-beständigem 1680D Ballistic Nylon mit wasserabweisender InnenbeschichtungMOLLE-Aufsatz aus stabilem Hypalon-Material auf der Oberseite für Smartphone- und TablethalterReflektierende Details für bessere SichtbarkeitNetzfächer im InnerenWitterungsschutz durch mitgelieferte RegenhaubeRobuster TragegriffKabeldurchlass an der Vorder- und RückseiteMit Kabelschloss oder Diebstahlsicherung verwendbarLieferumfang1 x PRO Micro Tankrucksack1 x PRO Oberring1 x Regenhaube PRO MicroMontagematerialDetailsMaterial: 1680D Ballistic NylonFarbe: schwarz / grauMaße: 27,0 x 20,5 x 11,0 cmGesamtgewicht: ca. 0,8 kgGesamtvolumen: 3,0-5,0 lHinweisFür die Montage am Tank wird der passende PRO Tankring benötigt. Dieser ist separat erhältlich.Die Tankrucksäcke der PRO Serie sind nicht mit den EVO Tankringen kombinierbar.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application

The racing rear fairing comes as one part and is mounted with only six screws to the original rear frame. It contains a bulge for the additional available GPS antenna. The needed hole for the cable is also predrilled on the right spot.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly    

Vehicle-Specific Information: for forged wheels, for Hayes brake caliperThe fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while also providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   220 mmInner Diameter:   119.5 mmBolt Circle:   136 mmNumber of Holes:   5 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   solid Manufacturer:   Brembo

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application

Seat Unit Racing fits to BMW S 1000 RR MY from 2019 and M 1000 RRThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

The tank fairing for the BMW Racing models beginning from 2019 is made as a single piece and reaches till the seat. It protects the fuel tank and is mounted with only 5 screws and can be taken off within seconds. This part is a protective carbon piece and is mounted directly on top of the original component. For the mounting only original screwpoints are used. p>   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly  

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery paint protection film set detailed instructions for application