The air channel connects the upper fairing with the airbox. It is needed for a correct fitment of the upper fairing and also to ensure that the ram air can work correctly.  For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - with German ABE - only for solo riding - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Airintake Channel fits to BMW S 1000 RR starting from 2019. and BMW M 1000 RRThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Universal programmable TPMS sensor, can be programmed via the diagnostic tool TECH350 (under accessories) or, even better, a clone of the OE sensor can be created. Valve diameter 11.5mm The battery life corresponds to the OE sensor and lasts at least 5 years

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

The bellypan of the BMW S1000RR Racing is part of the race fairing kit of the BMW S 1000 RR Racing since 2019. It is mounted via quick fasteners and not compatible with the original fairing parts. It is only compatible with a full racing exhaust system. The lower fairing is closed and is suitable to catch up to 5L of fluids. In the front and the rear are holes which can be open when it’s raining.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The bellypan of the BMW M1000RR Racing is part of the race fairing kit of the BMW M 1000 RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts. It is only compatible with a full racing exhaust system. The lower fairing is closed and is suitable to catch up to 5L of fluids. In the front is a hole which can be open when it’s raining.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

BMC Racing Filter   In addition to the standard filter version, BMC has developed another type of filter.   This is the "Race" filter, which maintains the same shape as the standard filter but is constructed from filter material that allows for increased airflow compared to other filter systems, while still retaining its filtering effectiveness.   The BMC "Race" filter is designed for those who are not satisfied with the normal performance of their motorcycle but instead modify the engine and the control unit to achieve increased power. The "Race" filter can be recognized by a yellow stripe.

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to be resistant to gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

SH- Belagmischung Vollmetallischer Sinterbelag mit Speziallackierung . Hoher Reibwert , garantiert sehr gute Leistung . Auf fast allen Scheiben einsetzbar . Nur im Austausch gegen Sinterbeläge in der Erstausstattung . Nur bedingt im Rennsport einsetzbar , da keine Hitzeresistenz ab 400 Grad . Im Reibwert auf den SV- Belag abgestimmt . Nur für Hinterachse einsetzbar .

EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with the highest braking power, extreme durability, and no fading, particularly for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

Fairing Holder (4 pieces) kit needed for race fairing kit for BMW S 1000 RR 2019. and BMW M 1000 RR.This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The 1-piece racing side fairing for the BMW S 1000 RR from 2017 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!Race only - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The 1-piece side racing fairing for the BMW S 1000 RR from 2017 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!Racing only - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The side fairing on the left side of the BMW M1000RR Racing is part of the race fairing kit of the BMW M1000RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The side fairing on the right side of the BMW M1000RR Racing is part of the race fairing kit of the BMW M1000RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Carbonfiber flap on the fairing left side BMW M 1000 RR starting from MY 2021 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Carbonfiber flap on the fairing right side BMW M 1000RR starting from MY 2021 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

EBC Bremsbelag – HH Sinterbelag Der EBC HH-Bremsbelag ist ein hochwertiger Sintermetall-Belag, speziell entwickelt für maximale Bremsleistung bei Motorrädern. Die Kennzeichnung „HH“ steht für die höchste Reibwertklasse nach SAE J661 – sie garantiert hervorragende Verzögerungswerte bei trockenen wie nassen Bedingungen.   Eigenschaften:   Sehr hoher Reibwert (HH-Klasse) für kraftvolles Bremsen Konstante Performance auch bei hohen Temperaturen und extremer Belastung Sintermetall-Mischung für lange Lebensdauer und geringe Fading-Neigung Optimale Dosierbarkeit und gleichmäßiger Druckpunkt Für Straße und sportliche Fahrweise (auch Touring geeignet) Einsatzbereiche: Ideal für leistungsstarke Motorräder, sportliche Fahrer und alle, die Wert auf maximale Bremskraft, Standfestigkeit und Haltbarkeit legen.

SR Sintermetall Racing Brake Pad for Front This is a material that remains very stable under all operating conditions. With high braking performance in hot conditions and a good coefficient of friction in cold conditions, it is also suitable for fast road use, making it ideal for motorcycles that are used both on the road and on the racetrack.

The 1-piece carbon upper trim for the BMW M 1000 RR replaces the original part using the original mounting points. The upper section is a 1-piece version. the centre trim piece is already incorporated into the carbon part. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!For race only - no ABE and TÜV This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.