With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and roundness reliability are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   320 mmInner Diameter:   181 mmBolt Circle:   203 mmNumber of Holes:   5 Hole Diameter:   14 mmThickness:   5 mmDesign:   solid Manufacturer:   Brembo

The design of our front fender in carbon for the BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) is noticeably smaller compared to the original. This lends the motorcycle a notably sportier appearance. and special attention was again paid to this product&rsquos splash water protection. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front exhaust cover in carbon for BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 R (2008-now) models is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

Gasgriff Heizgriff rechts für BMW K1200S K1200R + Sport F800 S ST F650GS Twin F800GSAngeboten wird hier ein NeuteilFahrzeug: K1200S K1200R + Sport F800S F800ST F650GS F800STHersteller: BMWZustand: NeuwertigBeschreibung: wird verkauft wie abgebildetTeilenummer: 61317708286

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

The new handlebar conversion for your K1200R and K1200R Sport incl. ABE Do you absolutely not want to miss out on the great look of the K1200R? However, do you sometimes wish to bring the handlebars a little closer?The new handlebar conversion makes it possible. The handlebar stubs come towards you by a full 85 mm. Additionally, there is a circular adjustment option that allows you to position the stubs a bit further forward or backward. This achieves a natural ergonomics for a healthier sitting position.For the model K1200R, the brake line and throttle cable need to be extended.These are included in the price.A tip from us: If you are somewhat handy, you do not need to disassemble the air filter apparatus; you can remove the throttle cable from the side and reattach the new one. All items have been mounted and tested on original motorcycles - without any modifications.

The new handlebar conversion for your BMW K1200S and K1200R and Sportincluding ABEWe have now also completed the short version for the sport-oriented rider. This achieves an adjustment range of 50 mm compared to the previous adapter of 85 mm.This provides a natural ergonomics for a healthier sitting position.The adapters for the K1200S up to 2006 fit without any modification of the lines. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

The heelguards in carbon for the BMW K 1200 S (2005-2008) / K 1200 R (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 S (2008-now) / K 1300 R (2008-now) Models are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

compatible with most Hepco&Becker side case carriers. (Please note any potential restrictions in the model-specific notes of the carrier) suitable for one helmet and more includes key and locking cylinder includes lock adapter to secure the case to the side case carrier waterproof thanks to special sealing cover is screwed on and can be painted in vehicle color if needed integrated bumper protects against minor bumps case shell made of impact-resistant, molded plastic cases can be keyed alike to existing cases or top cases.Please enter the key number in the comments field during the ordering process. Scope of delivery: right side case + left side case + 2x lock adapters optional inner bags available in the accessory program Recommended load: 10kg per side case (Please note the model-specific notes of the respective carrier, as well as the motorcycle manufacturer-specific information)

The special Journey Topcase 30 is delivered with a universal mounting plate and installation accessories. This allows for attachment to almost any third-party luggage rack with a flat mounting surface, for which we do not offer a model-specific top case rack. not compatible with Hepco&Becker tube luggage racks, Alurack luggage racks, or Easyrack luggage racks waterproof case shell made of impact-resistant plastic includes universal mounting plate and installation materials includes key and lock cylinder extensive range of accessories available suitable for one helmet Recommended load: 3-5kg in the top case (Please note the model-specific instructions for each rack, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our top cases. Not only new top cases fit. Older Hepco&Becker models can also be mounted. The basic mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and top cases with universal plate.The carriers are made specifically for each model and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With high-quality coating and proper care, the look is also maintained in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the top case is pushed onto the tube luggage rack and locked with a metal retaining lock on the carrier Luggage racks generally do not require ABE or registration

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The principle of operation of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the sides of the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the product family of Royster side bags and the Royster rear bag No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with a compatible fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The ribs attached to the sides of the magnets mechanically secure the system. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Waterproof, integrated inner bag with roll closure Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessories: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

The permanently bolted side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tubing MADE IN GERMANY Permanently bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h

Compatible with the model-specific HEPCO&BECKER Lock it tank rings, this everyday little helper can be mounted on all models with the appropriate fuel cap.The functional principle of the tank ring closure: The problems of placing tank bags are eliminated by the magnetic centering. The handling is simple and quick. The system is mechanically secured by ribs attached to the magnets. The transfer forces of the holder amount to over 70kg of vertical load, ensuring a stable and secure connection to the motorcycle at all times. To unlock, simply pull on the holding strap, allowing the magnets to release the system. The magnets align themselves, and the tank bag can be removed.Child's play and effective – simply genius. Compatible with the Royster side bags and the Royster rear bag product family No direct contact of the tank bag on the tank, preventing damage to the paintwork Can be mounted on Lock-it tank rings or sport and mini racks with Lock-it closure. A Lock-it mounting kit is required for sport and mini racks. Art. 506100 Features: Attachment to the model-specific HEPCO&BECKER Lock-it tank ring (not included) Extremely high shape stability due to deep-drawn EVA material Rubberized zipper Side reflective surface - increased visibility of the motorcycle in road traffic Top shell and bottom shell made of abrasion-resistant polyester D1200 Lockable zippers - Optional accessory: security lock Carrying handle Very low weight Recommended load capacity: 3kg (Please observe the model-specific notes on the tank ring, as well as the motorcycle manufacturer's specifications.) Recommended maximum speed: 130km/h