Fairings & Paint Protection Film

The carbon swing arm covers for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-2015) / HP 4 (2012-now) is attached to the swing arm using the adhesive strips from the carbon parts. The left swing arm cover features a carbon lower chain guard required for many racing classes. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The swing arm cover for the left side for the BMW HP4 RACE.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The swing arm cover for the right side for the BMW HP4 RACE.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The tank side panel in carbon for the BMW S 1000 RR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The tank side panel in carbon for the BMW S 1000 RR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon upper tank cover for theBMW S 1000 RR Straße (2010-2014) / HP 4 (2012-now) replaces the original part using the original mounting points. Aside from the carbon side fairings this eye catcher is a must for every S 1000 RR / HP 4! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Carbon Verkleidungsseitenteile für BMW S 1000 RR / HP 4 Optimale Performance und Design Passend für Modelle: S 1000 RR Straße (2012-2014) / HP 4 Ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte Integrierter Plakettenträger - kein zusätzlicher Kauf notwendig Vorteile Gewichtsersparnis: Reduziert das Gewicht um ca. 70% im Vergleich zum Original Höhere Steifigkeit: Verbesserte Stabilität und Performance Material: Komplett aus Prepreg im Autoklaven gefertigt Schutzbeschichtung: Übertrifft herkömmlichen Klalrlack in Schutzwirkung und Kratzfestigkeit Erleben Sie die dreidimensionale Wirkung der Carbonstruktur in unserem 360 Grad Video! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Carbon Verkleidungsseitenteile für BMW S 1000 RR / HP 4 Produktbeschreibung Passend für BMW S 1000 RR (2012-2014) und HP 4 Ersetzt das originale Bauteil mit originalen Befestigungspunkten Integrierter Plakettenträger Vorteile Gewichtsersparnis: Bis zu 70% leichter als das Original Höhere Steifigkeit: Für verbesserte Performance Hochwertige Verarbeitung: Gefertigt aus Prepreg-Material im Autoklaven Schutzbeschichtung: Übertrifft herkömmlichen Klarlack in Kratzfestigkeit und Beständigkeit Optische Highlights: Verstärkt die dreidimensionale Wirkung der Carbonstruktur Erleben Sie die Perfektion von Carbon und optimieren Sie Ihre BMW S 1000 RR / HP 4 mit diesen exklusiven Verkleidungsseitenteilen! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.