Vehicle-Specific Information: for double discSV - Friction Material CompositionFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for motorsport, as there is no heat resistance above 400 degrees.Only suitable for the front axle.
Vehicle-Specific Information: for ATE CaliperEBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.
Vehicle-Specific Information: for ATE CaliperStandard Pad Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.
The front fender in carbon for the BMW R NineT Serie is a direct replacement for the original component.it contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance
Offered here is a used part Vehicle: R1200C Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, scratches and scuffs, rust, with brake light switch Part number: 46712331435
The front fender in Carbon for the BMW R Nine T is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
The front mudguard for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 121g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
The front mudguard for the BMW R Nine T is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
The rear part for the front mudgard in our unique design for the BMW R nineT Urban GS blends into the motorcycle&rsquos overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
Wheel Bearing Set JMP
The fuel tank protector for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 67g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.
Fuel Tap
Fuel Tap
Gabeldichtring-Satz mit Staubkappe Tourmax Made in Japan
Foot rests are progressively wound fork springs for better driving habits - chassis improvement progressive fork springs harder than the original - No strike through multi-less nose dive, no Schwammigkeit.- air support falls path no blowing the oil seals multi better appealing For high-mileage ideal replacement for Tested limp Originalfedern- and recommended by leading Motorradfachzeitschriften- Simple self-installation with detailed instructions restriction: For BMW models of K75-row until Bj.91 with Sachs fork.
Angeboten wird hier ein Gebrauchtteil Fahrzeug: R28 R1150R + Rockster R850R259 R1100S259C R1200C + Independent + Montauk R850CK30 R1200CL Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 23312330144
Mounting bracket / base mount for the zumo 340/ 345/ 350/ 390/ 395 for attachment to the motorcycle.Replacement mounting bracket compatible with the zumo 340/ 345/ 350/ 390/ 395. - To attach to the handlebar, you will need "optional" accessories from RAM and/or our Touratech handlebar mount.- With the optional Garmin connection cable (01-065-0418-0), the zumo 340/ 345/ 350/ 390/ 395 can also be connected to the electrical system of your motorcycle.
Throttle slide spring for Bing constant vacuum carburetor type 64-3. Total length 119 mm; Outer diameter 24 mm; Wire thickness 0.8 mm Spring: soft - Replacement part for Bing carburetors: 64/26/303-30464/26/315-31864/28/303-30464/32/305-30664/32/311-31464/32/323-32464/32/335-336 (BMW R65US)64/32/347-35264/32/375+377+379+381+383+385
Heritage
BMW Motorrad Heritage models are all motorcycles that specialize in classic cruising. The focus here is on customization!