If the BMW Variokoffer becomes too small......we can quickly provide a solution with the robust and easy-to-install expansion bags. Made from high-strength Cordura fabric, they are tailored for the water-cooled GS and offer max. 30 liters of additional storage space without hindering the rider or passenger. After opening two zippers, more storage space is quickly available on the go, with the expansion occurring only in the outer area so that the passenger still has sufficient room.Thanks to integrated reinforcements in the side walls, the bags are absolutely shape-stable, and large reflective strips provide additional safety.-we do not use simple nylon, but certified Cordura fabric made in Germany, as used in motorcycle protective clothing and expedition gear-fabric inner side waterproof coated-Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-reflective inserts from 3M Scotchlite ensure best visibility-ergonomic, sturdy carrying handle for practical transport off the motorcycle-easily expandable via a circumferential zipper-built for extreme loads and long durability-best fit-secure attachment and yet quickly removable from the vehicle-low weight with high payload and large usable volume-large main compartment without disturbing subdivisions for maximum space and individual loading-non-slip, soft base plate to avoid paint damage and for secure hold-the measurement of the volume is practical and honest with the bag mounted on the vehicle and not, as is often the case, by estimation or rough calculationAttention: Please use a paint protection film if necessary! (Item number 01-101-0100-0)Dimensions: (L x W x H) approx. 46 x 24 x 13/23 cm; Volume: approx. 2 x 10/2 x 15 liters.Color: black

Fairing Side Panel left side - BMW S 1000 XR MY 2015-2019 The Fairing Side Panel left side  in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

 Milled aluminum body, suspension strut in preload and rebound (60Clicks) adjustable: by means of locking screw.

TOURATECH Fernreisefußrasten * Works *, low, for BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS + Adventure by 2012, R80GS, R100GS, F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar, G650GS, G650GS Sertao item Description  Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).  The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

The fixed side case carriers from Hepco&Becker are securely connected to the motorcycle frame. Almost all touring side case systems from Hepco&Becker fit onto these carriers. The cases are securely attached to the carrier using a metal locking mechanism to prevent theft. Additionally, a lock adapter is required. This is usually included with the side cases. The lock adapter is screwed onto the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in case of a fall.The side case carriers from Hepco&Becker can usually be combined without any issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY firmly bolted to the motorcycle frame high-quality surface finish Compatible with most Hepco&Becker hard-shell side cases (Please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Tube diameter: 16 mm

The left flap / watercooler cover for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The right flap / watercooler cover for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Float Chamber Gasket JMP

Float pin for Bing constant vacuum carburetor type 64-3. Length 34 mm; Diameter 2 mm

Pin for Footpeg    Stainless Steel   Dimensions: - Total Length: 37mm - Head Diameter: 11mm - Bottom Diameter: 8mm  

Footpeg Lowering Kit BMW S1000XR (from model year 2020) for the passengerPlease check the type of your motorcycle in your vehicle registration document and then select the corresponding model.including ABE To individually enhance the seating comfort on your BMW, we have developed this footpeg lowering kit for the S1000XR from model year 2020. With our modifications, you can enjoy the legroom that corresponds to your height. With the modified footpeg, you achieve a lowering of 40 mm Please select the appropriate measurement when ordering.This allows you to achieve a natural ergonomics and a healthier seating position. The advantage of this adapter is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Adjustable Passenger Footpeg Lowering for BMW F650 Year 1999 - BMW R1200GS up to Year 2012including ABEWith the new footpeg adapter for your BMW, no wish remains unfulfilled.As diverse as its adjustment options are, so are its applications.The adapter in its basic form fits 98% of all motorcycle models.The optimal leg angle is 90°. A bent leg angle also bends the blood vessels, thus not supplying the leg with enough oxygen. This leads to the dreaded varicose veins.With the adapter, a lowering of the peg by 60 mm is achieved. Generally, the basic adapter can be mounted upwards or downwards.This allows for a natural ergonomics and a healthier sitting position.After installation, the adapters can be adjusted every 4° so that the footpeg is positioned vertically downwards. The passenger even has the benefit of being able to adjust the peg upwards if there is enough space available.Depending on the setting, the passenger achieves a healthy and comfortable leg position.The complete kit for both sides is delivered with side compensation depending on the model. This variant is slightly more expensive but necessary, as, for example, the exhaust must be bridged.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.As with all adjustable products, the footpeg adapter is also characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".Please consider that lowering the footpeg also means less lean angle.The advantage of the adapters is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Footpeg Lowering Kit BMW S1000XR for the Passengerincluding ABE To individually enhance the sitting comfort on your BMW, we have developed this footpeg lowering kit for the S1000XR. With our modifications, you can enjoy the legroom that corresponds to your height. With the modified footpeg, you achieve a lowering of 40 mm or, if you need a bit more, a lowering of 60 mm.Please select the appropriate measurement when ordering.This allows you to achieve a natural ergonomics and a healthier sitting position. The advantage of this adapter is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Footpeg Lowering Kit for the Rider - for your BMW R1200GS up to 2013 and Adventureincl. ABE To individually improve seating comfort, we have developed this footpeg lowering kit for the BMW R1200GS, specifically for the pegs that are angled upwards. Perhaps you have already experienced discomfort in your wrists and knees during a longer tour. With our modifications, you can enjoy the legroom that corresponds to your height. The footpeg is lowered by 38 mm downwards. With the altered footpeg, you achieve better ergonomics and a healthier seating position.Please note that ground clearance is limited with our footpeg lowering kit.For newer BMW models, nothing can be adjusted on the brake side anymore. However, you will quickly get used to the altered foot position, just like in a car.For shift levers with a rubber pad of Ø 19 mm, we recommend our shift lever cap. It extends the shift lever by 15 mm outward, making it more accessible. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

JMP Fork Protector for Telescopic Forks - Complete set including rubber spacers and cable ties- Optimal protection against stone chips and dirt- Universal diameter Color: black

Fork Seal Ring Tourmax   Made in Japan   Made of stainless steel (SUS304WPB).

Frame Cover (left side) - BMW S 1000 XR MY 2015-2019Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Frame Cover right side - BMW S 1000 XR MY 2015-2019Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

In addition to our rear axle crash pads, we also offer crash pads for the front axle of your GS. These small but effective parts protect the critical points of your bike and prevent damage to the fork leg and axle seat in the event of a fall. Available as a set for both sides.

The Front Beak for the BMW R 1250 GS from 2019 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting. The part have a weight of only 320g!This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance 

The Front Beak for the BMW R 1200 GS (LC) from 2017 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting. The part have a weight of only 320g!This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The front beak Extension for the BMW R 1200 GS (LC) 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.