DUSC XL Topcase-SystemDas DUSC XL Topcase-System besteht aus dem robusten DUSC XL Hartschalenkoffer und dem passenden ADVENTURE-RACK Gepäckträger für die BMW G 310 GS. Ein Adapterkit und der DUSC Schloss-Satz sind im Lieferumfang enthalten.Mehr Raum und mehr Komfort auf deiner Tour: Mit seinen 55 Litern Fassungsvermögen bietet der DUSC XL großzügigen Platz für dein Gepäck – egal ob beim Transport oder zum Verstauen in der Pause. Der ABS-Hartschalenkoffer mit stabilem Aluminiumrahmen ist extrem robust, bei vergleichsweise geringem Gewicht. Die Befestigung des DUSC XL auf dem Gepäckträger ist kinderleicht: Einfach den Koffer auf die montierten Haltepunkte setzen und anschließend über das Verschlusssystem fixieren. Die kompakte Bauweise ermöglicht die praktischen Nutzung im täglichen Stadtverkehr oder auf ausgedehnten Touren.Lieferumfang1 x DUSC XL Topcase1 x ADVENTURE-RACK Gepäckträger1 x Adapterkit für ADVENTURE-RACK Gepäckträger1 x Schloss-Satz Hartschalenkoffer2 x ÖffnungsbegrenzerMontagematerialDetailsMaterial: ABSFarbe: schwarzGesamtgewicht: ca. 8,7 kgGesamtvolumen: 55,0 lHinweisBessere Gepäckorganisation durch separat erhältliches DECKELNETZ

Dust caps from JMP   - better breakaway torque and lower friction due to special grease coatingTechnical Data:Inner diameter:   40 mmOuter diameter:   52.5 mmInstallation height:   4.6 mmTotal height:   14 mmManufacturer:   JMP

The JMP fork dust seals are manufactured by NOK in Japan. NOK is the leading Japanese supplier of fork seals and dust caps, supplying many well-known vehicle manufacturers in Japan and Europe, as well as the leading manufacturers of shock absorbers and chassis components in the motorcycle sector. JMP fork dust seals are therefore a high-quality replacement for the original part and guarantee a long service life, low friction, and thus improved responsiveness.Technical Data:Inner Diameter: 41 mmOuter Diameter: 54.4 mmInstallation Height: 4.6 mmTotal Height: 14 mmManufacturer: JMP

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, thus integrating harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upwards the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: in combination with the original luggage bridge.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, and motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

BMW F 800 GS F800GS Easyrack Topcase black EasyRack - the alternative to AlurackHepco & Becker Easy racks are specially designed for our top cases konzipiert.Sie ​​can so that every top case (except Orbit TC and standard TC) of us, whether aluminum or plastic mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Easyrack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Easyrack granted a high strength and a very elegant appearance. The Easyrack also provides additional attachment points for luggage straps for example, roll bags attach to können.Der highlight: the top case mounting necessary, the bracket disappears when not in use by simply moving in Easyrack and thus no longer interfere with the dynamic look of the motorcycle. The facts: • with folding bracket for own luggage and all Hepco & Becker top boxes • Made of aluminum, • High strength, high-quality optics • Integral plastic trim, • bracket with ball locking system and mechanical stop • Rotating attachment for luggage straps • Instead Alurack universally montierbarNur for Hepco not suitable & Becker top boxes for side cases!

EBC CK The EBC CK standard clutch plates correspond to the original plates in dimensions and quantity. The friction material is made from a cork-based composition with a high aluminum content to minimize wear and fading. The highly compressed material also prevents the expansion of the plates and clutch slippage even under extreme load. Suitable for all types of motorcycles across all performance classes.

EBC Standard Semi-Sintered Metal Brake Pads (V-Series) The EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are organic aramid brake pads with a 30% copper content, designed for cruisers, big twins, and touring bikes. These pads are 6 times stronger than steel and are completely asbestos-free. The medium to high friction coefficient ensures strong braking power across a wide temperature range. The high braking force results in minimal wear on both the brake pad and the brake disc. EBC Standard Semi-Sintered Metal Brake Pads (V-Series) are TÜV certified and come with an ABE!

EBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

Vehicle-Specific Information:  for simple discEBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

Sonderanfertigung nach Kundenwunsch Speziell für Kunden, die Ihr Motorrad umbauen und eine Sonderlösung benötigen.R80G/S, ST/ Silencer R80G/S, ST Highfire-Auspuff Schlanker Endschalldämpfer am Kundenmotorrad gefertigt.Lieferzeit 1-2 Wochen.In Deutschland Einzelabnahme durch den TÜV notwendig.

JMP Flasher Relay   Number of Poles: 3-Pole Flat Connector   Operating Mode: Electronic   Nominal Voltage: 12 Volts   Switching Power: 2 - 4 x 21 Watts + 0 - 4 Watts   Connections: 31 = Ground 49 = Battery 49A = Switch   Blinking Frequency: 85 per Minute    

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 8 546 386 is used on the following vehicles:

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. the Carbon Engine Cover weighs about 105 gram

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle includes mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

The ESA-Box cover in Carbon for the BMW R 1200 GS (LC) from MY 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ESA-Box cover in Carbon for the BMW R 1250 GS from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.   The cover for the ESA box is only suitable for the 2019 model year. A comparable protective effect can be achieved by combining the carbon parts RHL.028.GS19T.K and RHR.029.GS19T.K together with the rear hugger. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

EVO Fußrasten-KitDie Original-Fußraste bietet keine bequeme Position? Dann ist das EVO Fußrasten-Kit von SW-MOTECH die ideale Lösung. Ein ausgeklügeltes System, bestehend aus drehbaren Elementen mit fest ineinandergreifenden Zähnen, erlaubt 36 Variationsmöglichkeiten. Die Position der Fußraste lässt sich nach unten, vorne und hinten sowie in der Neigung auf die individuellen Bedürfnisse einstellen.Die modellspezifischen Gelenkadapter werden einfach mit den Originalteilen an der Fußrasten-Aufnahme montiert. Wie das funktioniert, zeigen wir in der Anbauanleitung.Einfache Montage an der original Fußrasten-Aufnahme36-fach verstellbar über drehbare, verzahnte Elemente nach unten, vorne und hinten sowie in der NeigungIndividuelle Einstellung der Höhe (höchste Einstellung entspricht der Originalposition, Absenkung bis max. 15 mm möglich)Sicherer Halt durch Verzahnung der Elemente und VerschraubungMarkierungen erleichtern das symmetrische Einstellen beider SeitenProfil mit abgerundeten Kanten schont die Stiefelsohle und gibt zugleich extra viel GripAbnehmbare, metallverstärkte Gummiauflage mit abrutschsicherer Oberflächenstruktur und großer Auflagefläche (ca. 8 x 5 cm) für mehr Komfort und HaltAus elektropoliertem, korrosionsbeständigem EdelstahlgussMontagematerial im Lieferumfang enthaltenLieferumfang2 x EVO Fußrasten2 x modellspezifische GelenkadapterMontagematerialDetailsMaterial: Edelstahl / GummiFarbe: silbern / schwarzGesamtgewicht: ca. 1,4 kgGenehmigungshinweisDas mit dem Produkt ausgelieferte ABE-Gutachtenheft muss bei der Fahrt immer mitgeführt werden. Diese ABE gilt nur für die gelisteten Modelle und unter Beachtung der Informationen in der Anbauanleitung. Eine Eintragung in die Fahrzeugpapiere ist bei Mitführung des Dokumentes nicht notwendig. Der Verwendungsbereich im ABE-Dokument wird jährlich erweitert. Die aktuelle Version des ABE-Gutachtens steht im Download-Bereich unseres Webshops zur Verfügung.Bitte beachten Sie, dass eine Abklärung zur Freigabe des Produktes für die Motorradfahrzeugkontrolle außerhalb Deutschlands vor dem Erwerb zu klären ist. Technische Artikel, die für eine Eintragung im jeweiligen Land abgelehnt wird, können leider nicht mehr retourniert werden. Für das Ausstellen einer notwendigen ausländischen Zertifizierung können Kosten entstehen.

  Exhaust Connection Gasket   Original Spare PartTechnical Data:Inner Diameter:   36.5 mmOuter Diameter:   38.5 mmHeight:   45 mm

Optimally dissipates heat and effectively prevents heat buildup in your case.The perfect complement to your ZEGA Evo X special system!Only suitable for original end silencers!

Sito Gasket - Gasket between the manifold and the muffler - Outer diameter 50 mm - Inner diameter 43 mm - Length 32 mm - for Sito exhaust systemsTechnical Data:Inner diameter: 43 mmOuter diameter: 50 mmHeight: 32 mm

Exhaust Valve   - 32mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.Technical Data:Head Diameter:   31.9 mmTotal Length:   102.5 mmStem Diameter:   7 mm

Exhaust Valve   - 36mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.        Technical Data:Head Diameter:   36.00 mmTotal Length:   99.00 mmStem Diameter:   7.00 mm