Original BMW Spare Part Additional Information The part with the BMW part number 46 63 8 546 386 is used on the following vehicles:

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

Fairing Side Panel left side - BMW S 1000 XR MY 2015-2019 The Fairing Side Panel left side  in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Footpeg Lowering Kit BMW S1000XR (from model year 2020) for the passengerPlease check the type of your motorcycle in your vehicle registration document and then select the corresponding model.including ABE To individually enhance the seating comfort on your BMW, we have developed this footpeg lowering kit for the S1000XR from model year 2020. With our modifications, you can enjoy the legroom that corresponds to your height. With the modified footpeg, you achieve a lowering of 40 mm Please select the appropriate measurement when ordering.This allows you to achieve a natural ergonomics and a healthier seating position. The advantage of this adapter is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Footpeg Lowering Kit BMW S1000XR for the Passengerincluding ABE To individually enhance the sitting comfort on your BMW, we have developed this footpeg lowering kit for the S1000XR. With our modifications, you can enjoy the legroom that corresponds to your height. With the modified footpeg, you achieve a lowering of 40 mm or, if you need a bit more, a lowering of 60 mm.Please select the appropriate measurement when ordering.This allows you to achieve a natural ergonomics and a healthier sitting position. The advantage of this adapter is that the original footpeg is retained. All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Frame Cover (left side) - BMW S 1000 XR MY 2015-2019Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Frame Cover right side - BMW S 1000 XR MY 2015-2019Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

SR Sintermetall Racing Brake Pad for Front This is a material that remains very stable under all operating conditions. With high braking performance in hot conditions and a good coefficient of friction in cold conditions, it is also suitable for fast road use, making it ideal for motorcycles that are used both on the road and on the racetrack.

The front fender in carbon for the BMW S 1000 XR is a direct replacement for the original component We could improve the length of this front fender for the S 1000 XR to protect the coolers better against dirt and stones. This front fender contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Front Sprocket Cover BMW S1000XR'15 The front Sprocket Cover in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Mounting bracket / base mount for the zumo 340/ 345/ 350/ 390/ 395 for attachment to the motorcycle.Replacement mounting bracket compatible with the zumo 340/ 345/ 350/ 390/ 395. - To attach to the handlebar, you will need "optional" accessories from RAM and/or our Touratech handlebar mount.- With the optional Garmin connection cable (01-065-0418-0), the zumo 340/ 345/ 350/ 390/ 395 can also be connected to the electrical system of your motorcycle.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

The ride of your life with the zumo® XT2 and the best motorcycle navigation from Garmin ever. Discover unforgettable tours and diverse routes along popular motorcycle roads, featuring MICHELIN Scenic Roads and Garmin Adventurous Routing™. Our brightest and largest zumo® display is easy to read in all conditions. Connect with other bikers via the Tread® App, share your ride dynamics and GPX data, or create Group Rides for shared trips. With real-time information on weather and traffic, as well as excellent connectivity through Bluetooth calling and Smart Notifications, you’ll always stay up-to-date. Pair your zumo® XT2 with the inReach® Mini 2 (sold separately) for global satellite communication or use the interactive SOS emergency call in case of an emergency.HighlightsRobust motorcycle navigation with a bright 6-inch (15.2 cm) HD displayVisual route planner - including Garmin Adventurous Routing™,MICHELIN Scenic Road, and popular motorcycle routesCompatible with Tread® App, including Group Ride MobileRide summary with data on your ride dynamicsMICHELIN Green Guide, Trendy Places, and Local SpotsGarmin real-time services for traffic, weather, and fuel pricesSmart & Connected - notifications, calling, and moreAccident notification via Tread® App and mobile connectionCompatible with inReach® and Garmin Powerswitch™Included in deliveryzumo® XT2Motorcycle mountMounting kitMotorcycle connection cableUSB cableDocumentation

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Griffschutz für BMW S 1000 XR von Hepco&Becker Sowohl bei der Fahrt im Gelände als auch auf Asphalt gewährleistet der Hepco&Becker Griffschutz einen zuverlässigen Schutz der Hände des Fahrers und des Motorradlenkers. Modellspezifischer Handprotektoren-Schutzbügel für deine BMW S 1000 XR - Genau auf dein Motorrad angepasste Stahlrohrkonstruktion für den perfekten Look. Ideal für alle Adventure Bikes, um die Handprotektoren zu stabilisieren und vor z.B. Bruch bei einem Umfaller oder Bekanntschaft mit einem größeren Ast zu schützen! Zuverlässiger, robuster Schutz der Lenkerarmaturen bei Stürzen mit optimaler Aerodynamik. Individuell wie Du - Mach es zu deinem Bike! Details & Eigenschaften: Material: Stahlrohr, Verarbeitung made in Germany Oberflächenfinish: Hochwertige, farblich passende Pulverbeschichtung Farbe: schwarz Für Baujahre: 2020-2023 Lieferumfang: 1 Satz Griffschutzbügel (links & rechts) Vollständiger Satz Montagematerial Zweisprachige, bebilderte Montageanleitung Wichtige Hinweise: Die auf den Bildern gezeigten Kunststoff-Handprotektoren gehören zum Lieferzustand des Motorrads, sie sind NICHT enthalten! Bitte beachten Sie die die in der Montageanleitung und den Eigenschaften aufgeführten modellspezifischen Hinweise! Unsere modellspezifischen Produkte sind, sofern nicht explizit anders angegeben nur für den Serienzustand der Motorrads entwickelt! Passt eventuell nicht in Kombination mit nicht-originaler Lenkerklemmung, z.B. bei Komfortlenker oder Lenkererhöhungen! Aus Sicherheitsgründen sollten alle Schutzbügel nach einem Sturz ausreichend kontrolliert und ggf. ersetzt werden.

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Aesthetically pleasing handlebar risers for the BMW S1000XRincluding ABE Fits only models without vibration dampers!We have also developed a handlebar adapter for the BMW S1000XR, which significantly enhances riding comfort.With our aesthetically pleasing handlebar riser adapter, we raise the handlebar by 30 mm and bring it 40 mm closer to the rider. This is important as it allows for a more natural position, relieving the upper body and arms considerably.This achieves a natural ergonomics for a healthier sitting position.The set includes an adapter for rerouting the brake line.The adapters are discreet and anodized in silver to match the original. This item has been mounted and tested on original motorcycles - without any aftermarket modifications.

Handlebar Riser for the BMW S1000XRincluding ABE As a preliminary step towards an improved seating position, we offer this relatively affordable solution for your BMW S1000R, which raises the handlebar by 28 mm and brings it 10 mm closer.This allows you to achieve a more upright seating position, better ergonomics, and brings the handlebar closer and higher.However, if you need more comfort, you should opt for the significantly more relaxed version (1008-901446). All items have been mounted and tested on original motorcycles - without any modifications.

The heelguards in carbon for the BMW S 1000 XR are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The heelguards in carbon for the BMW S 1000 XR are an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components Absorbs shocks and ground contacts Rounded impact edges, recessed tie-down points in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load capacity: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and impact-resistant plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be delivered with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier at the back Luggage systems generally do not require ABE and do not need to be registered