Fuel Tap

Fuel Tap

JMP Gabeldichtringe – NOK für höchste Ansprüche   NOK Gabeldichtringe von JMP bieten eine exzellente Abdichtung bei gleichzeitig geringer Reibung – ideal für alle, die auf hochwertige Material und lange Haltbarkeit setzen. Die Dichtringe bestehen aus hochwertigem Elastomer-Material mit exakter Dichtlippengeometrie. Dadurch bleibt das Gabelöl zuverlässig im Inneren, während Wasser, Schmutz und Staub draußen bleiben. Perfekt für alle, die ihre Gabel dauerhaft leistungsfähig und dicht halten möchten – ob im Alltag, auf Tour oder bei sportlicher Beanspruchung.   Vorteile der JMP Gabeldichtringe (NOK-Qualität): • NOK-Spezifikation • Hervorragende Dichtwirkung bei gleichzeitig minimaler Reibung • Widerstandsfähig gegen Öl, UV, Schmutz und Temperaturwechsel • Exakte Passform – einfacher Einbau, zuverlässige Funktion • Langlebig, wartungsarm und ideal für anspruchsvolle Fahrer Die perfekte Wahl für alle, die keine Kompromisse bei Material und Funktion eingehen möchten – JMP Gabeldichtringe in NOK-Qualität stehen für Leistung, Präzision und Schutz auf höchstem Niveau

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

Throttle slide spring for Bing constant vacuum carburetor type 64-3. Total length 119 mm; Outer diameter 24 mm; Wire thickness 0.8 mm Spring: soft - Replacement part for Bing carburetors: 64/26/303-30464/26/315-31864/28/303-30464/32/305-30664/32/311-31464/32/323-32464/32/335-336 (BMW R65US)64/32/347-35264/32/375+377+379+381+383+385

SACHS cover for the clutch Druckplatte- OE -

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Threaded rod spoke / rim M4x5 - BMW original spare part

Gasgriff mit Verzahnung Neu für BMW R 54 65 80 100 K75 K100Angeboten wird hier ein Gebrauchtteil Fahrzeug: R45, R60/6, R75/6, R90/6, R90S, R45, R45/N, R45T, R45T/N, R65, R65LS, R65T, R60/7, R75/7, R80RT, R80/7, R65GS, R80G/S, R80ST, R80, R80GS, R80GS PD, R100GS, R100GS PD, R100/7, R100T, R100/7T, R100CS, R100RS, R100RT, K100RS, K75, K75S, K75C, K75RT Hersteller: BMW Zustand: NEU, keine Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 32721454129, 32721237884

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

HATTECH Header Set 38mm WITHOUT Cross Pipe / Interference Pipe For BMW R80 / 100R/GS and Mystic Fits without gasket on original pre-silencer or directly on Hattech Y-pipes suitable for models WITH and WITHOUT oil cooler no further modifications necessary WITHOUT interference pipe Available in various surface finishes

Robust 1.5mm aluminum shell material Thick aluminum edge and bottom profiles provide additional stability Absolutely waterproof due to foamed special seal Top-loader, carrying handles in the lid area, lid with stainless steel hinges<br> Sturdy metal locks including keys and locking cylinder (keyed alike to existing cases possible. Please enter in the comment field during the ordering process) Includes screwed-on metal railing Includes lock adapter to attach the case to Hepco&Becker side case carriers Extensive accessories available 35-liter case not suitable for a helmet Fits most Hepco&Becker side case carriers (Please note the motorcycle-specific information for the respective carriers) Recommended load: 10kg per side case (Please note the motorcycle-specific information on the carrier as well as the motorcycle manufacturer's specific information)    

Robust 1.5mm aluminum shell material Thick aluminum edge and bottom profiles provide additional stability Absolutely waterproof due to foamed special seal Top-loader, carrying handles in the lid area, lid with stainless steel hinges<br> Sturdy metal locks including keys and locking cylinder (keyed alike to existing cases possible. Please enter in the comment field during the ordering process) Includes screwed-on metal railing Includes lock adapter to attach the case to Hepco&Becker side case carriers Extensive accessories available 35-liter case not suitable for a helmet Fits most Hepco&Becker side case carriers (Please note the motorcycle-specific information for the respective carriers) Recommended load: 10kg per side case (Please note the motorcycle-specific information on the carrier as well as the motorcycle manufacturer's specific information)    

Hepco & Becker aluminum drinking bottle with screw cap (0.7L)

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every journey with a pillion. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. Vehicle-specific notes: also suitable for Xceed Topcase For each Topcase, the backrest is custom-made from black PU material to fit perfectly.

The Hepco&Becker complete carrier, consisting of side case carriers and a tubular luggage bridge, is securely bolted to the motorcycle and can be only assembled together. This carrier allows for the mounting of almost all Hepco&Becker side cases. Almost all top cases from our range can be mounted on the tubular luggage bridge. (The Orbit top case, as well as top cases with a universal plastic plate, do not fit)The side cases are locked to the carrier using a locking mechanism. The required lock adapters, which are bolted to the right and left of the side case carrier, are included as standard in the case set (Article number lock adapter: 700114)The model-specific and solidly constructed carriers are perfectly adapted to the respective motorcycle and reinforced with special inner tubes at heavily stressed points. Construction from steel tube Made in Germany firmly bolted to the motorcycle can only be assembled together suitable for almost all Hepco&Becker side cases and top cases Restrictions can be found in the model-specific notes or the assembly instructions Recommended load: 10kg per side case / 5kg in the top case (please observe vehicle-specific notes, our assembly instructions, and motorcycle manufacturer specifications) Scope of delivery: right carrier, left carrier, tubular luggage bridge for the rear, mounting materials, and instructions Luggage carriers do not require ABE and are registration-free Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination.

To keep your luggage organized. With this Hepco&Becker inner bag, your items won't be loose in the case anymore. The case is easier to load since the inner bag can be packed beforehand.At the end of the trip, you don't have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you'll always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep your luggage organized. With this Hepco&Becker inner bag, your items won't be loose in the case anymore. The case is easier to load since the inner bag can be packed beforehand.At the end of the trip, you don't have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you'll always look neat when unpacking with this bag. Delivery includes: 1x inner bag

To keep things organized in the case. With this Hepco&Becker inner bag, items no longer lie loose in the case. The case is easier to load since the inner bag can be packed beforehand.And at the end of the tour, you don’t have to remove and carry the entire case, just the inner bag. The bag is made of durable black fabric.Equipped with a 2-way zipper and an adjustable carrying strap,you will always look neat when unpacking with this bag. Delivery includes: 1x inner bag

compatible with most Hepco&Becker side case carriers. (Please note any potential restrictions in the model-specific notes of the carrier) suitable for one helmet and more includes key and locking cylinder includes lock adapter to secure the case to the side case carrier waterproof thanks to special sealing cover is screwed on and can be painted in vehicle color if needed integrated bumper protects against minor bumps case shell made of impact-resistant, molded plastic cases can be keyed alike to existing cases or top cases.Please enter the key number in the comments field during the ordering process. Scope of delivery: right side case + left side case + 2x lock adapters optional inner bags available in the accessory program Recommended load: 10kg per side case (Please note the model-specific notes of the respective carrier, as well as the motorcycle manufacturer-specific information)