Aesthetically pleasing handlebar risers - visually matched to the originalincluding ABEWe have also developed a handlebar adapter for the BMW R1200GS 2008 to 2012, providing significantly more relaxed riding.The handlebar adapter brings the handlebar 33 mm closer to the rider and 20 mm higher.This achieves a natural ergonomics for a healthier sitting position.The original handlebar risers are retained.No modification of the brake line is necessary for this conversion. Installation is done without disassembly/bleeding of the brake line.The adapters are discreet, matching the original, and powder-coated in silver. All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Support bracket for BMW motorcycle communication systems Additional Information

SysBag WP L/L Taschen-SystemMit dieser Kombination aus EVO Seitenträgern und zwei SysBag WP L Taschen macht SW-MOTECH die BMW R 1200 GS startklar für das nächste Motorrad-Abenteuer. Die belastbaren und abnehmbaren Träger geben den wasserdichten Offroad-Taschen optimalen Halt in jedem Terrain.Die SysBag WP Taschen sind deine zuverlässigen Begleiter für jedes Abenteuer, für jedes Einsatzgebiet und jedes Motorrad gibt es ein passendes Modell. Dank sorgfältiger Materialauswahl und aufwändiger Verarbeitung sind alle drei Größen S, M und L komplett wasserdicht und äußerst robust. Sie verfügen über einen Roll-Top-Verschluss und einen überlappenden Deckel. Die Innentasche ist herausnehmbar, zwei frei positionierbare Trenner mit Klettverschluss erleichtern die Gepäckaufteilung.Lieferumfang2 x EVO Seitenträger2 x Adapterkit für SysBag WP1 x Adapterplatte links für SysBag WP L1 x Adapterplatte rechts für SysBag WP L2 x SysBag WP LMontagematerialDetailsMaterial: TPUFarbe: schwarzGesamtgewicht: ca. 14,1 kgGesamtvolumen: 80,0 l

Fabric rear bag for strap attachment on various rear racks. Not waterproof. Practical and well thought out: securely attached to the passenger seat, the weight distribution is not negatively affected, and the bike remains neutral and agile. With a zipper and compression straps, it offers a variable volume of up to 25 liters. The design made of coated Cordura fabric is water-repellent and durable. With a carrying handle and straps, it can also be used as a backpack or shoulder bag.Small Sport StarCapacity 15-25 litersDimensions W x H x D: 26 x 33 x 20/33 cm

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

Custom Fit Paint Protection Film Paint Protection Film Set for Tank Bag 5-piece BMW R 1200 GS Year 04-07 reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint Protection Film Set detailed instructions for application

Custom-Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed without residue at any time weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

The HEPCO&BECKER tank protection bars perfectly follow the lines of the machine and give the motorcycle an individual character. In the event of a fall or unintended contact with the ground, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are absorbed as best as possible by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects the tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model

The HEPCO&BECKER Tank Protection Bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are absorbed as best as possible by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model

The HEPCO&BECKER tank protection bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front end high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model

The HEPCO&BECKER tank protection bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are absorbed as best as possible by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model

Taken from the off-road sector, we have the protection for the throttle position sensor. It's easy to unintentionally and unnoticed hit the sensor with your boot, and suddenly the settings are altered. Our elegant yet discreet protection effectively prevents this.Matching the motorcycle, of course, in black powder-coated finish.

Throttle Potentiometer Cover - compatible with R1200GS up to '08, HP2, R1200S, and R1200R This small yet visually appealing and effective throttle cover protects your throttle potentiometer in case of falls and similar incidents.It is attached as follows: Below the intake pipe, there is a hole, as shown in the installation photo, which is only used for a cable tie. This is cut, and at this point, our hex adapter, which has an eccentric M6 stub at the end, is attached. The adapter is made of V2A stainless steel. The cover is made of aluminum - available in black, silver, or blue anodized. All items have been mounted and tested on original motorcycles - without any modifications.

This revolutionary new device effortlessly installs mushroom-shaped rubber plugs in all tubeless tires while the tire can remain on the rim. With the help of the "Tire Repair Kit" and the included hex key, the plug is twisted into the hole. The plug expands under pressure, filling the punctured area. A strong pull on the shaft of the plug with pliers ensures a secure fit of the mushroom head against the inner wall of the tire, preventing any air from escaping. This technology guarantees maximum reliability and reduces your repair times in any situation.Only suitable for tubeless tires!Scope of delivery:- "Tire Plugger"- Adapter- Needle (with handle)- Rasp (with handle)- Hex key- 15 x plugs- Blade (foldable)- Bag- Fabric zipper bag (16 x 10 x 5 cm)Caution: Emergency repair kit!

For the individual installation of this cigarette lighter socket, you can use the integrated mounting bracket and the included cable ties. If your handlebars do not provide enough space, simply use the included extra-narrow handlebar mount. Of course, installation in the fairing is also possible.The spring-loaded cover does not flap in the wind and provides weather protection. The 7.5 A fuse can be mounted freely at the most convenient point in the wiring. The small hole at the bottom of the housing prevents moisture from forming in the socket.- Compact design- Flat spring-loaded cover- Long connection cables: 1.3 m- Integrated holding bracket- Extra-narrow handlebar mount- Option for fairing installation (27 mm)- Includes 7.5 A fuse

Finally, a clean solution for transporting additional liquids on the motorcycle. The 3-liter auxiliary canister with a standard opening (suitable for fuel nozzles) provides the opportunity to safely transport necessary liquids such as gasoline or diesel. The canister is approved as a gasoline canister. With child-safe closureWhen using it as a gasoline canister, ensure secure attachment outside of areas at risk of falling on the motorcycle! We recommend using our canister mounts for our luggage systems.Color Black, Capacity 3 liters (filling volume)Can be universally mounted on aluminum cases! For example, the original aluminum cases of the BMW R1200GS-ADV or BMW F800GS.Also fits in car spare wheels with rim sizes 13", 14", and 15"

Comfort Seat - Comfort can also be beautiful!Elegant seat combination for the R1200GS that can be used modularly.These seats are made from the highest quality materials and are specifically tailored to meet ergonomic requirements for long distances. Our seat largely avoids pressure points on the thigh caused by improper padding or poorly placed seams. The high-strength padding effectively protects the buttocks. "Sinking in" is not possible even after many kilometers. Furthermore, the contours of the seat are shaped to provide you with nearly perfect seating comfort. The high-quality upholstery fabric made of synthetic leather prevents the outlines from showing through due to the tight covering and the accumulation of rainwater on the seats.The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation, providing a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that creates enthusiasm!In the passenger seat variant, it is particularly noteworthy that sliding forward during braking is largely excluded, further perfecting passenger comfort. With this seat combination, you can tackle even the longest distances comfortably, whether alone or with a passenger.You can order the passenger and rider seats separately; both seats can be easily mounted in combination with the original counterparts as well as together.- The seat is 100% waterproof- Thanks to the Fresh Touch surface coating, there is a temperature difference of up to 10°C compared to the original seat cover

This handy, compact basic first aid kit is ideal for short trips, cycling tours, and other sporting activities. Practical, small, lightweight.This kit contains everything that is important and required according to DIN 13167 for motorcyclists. Adhesive bandages, instant wound dressings, bandage packages, emergency blanket, sterile dressing, scissors, vinyl gloves, and a first aid manual are included.This first aid kit should be an essential part of your equipment. The bag is made of water-repellent nylon fabric with a large zipper. The First Aid Kit DIN 13167 is specifically designed for motorcycle use and contains the following:- 1 roll of adhesive bandage- 8 packs of instant wound dressings- 2 bandage packages- 1 emergency blanket- 1 sterile dressing- 1 pair of scissors- 4 bags of vinyl gloves- 1 first aid brochure- 1 contents listIn Austria, carrying a DIN 13167 first aid kit on a motorcycle is mandatory!Dimensions and Weight:- Dimensions: 15 x 10 x 5 cm- Weight: 240 g

Absolutely stable and high-quality film, protects the fork against stone chips and other damage.Black film with white print. Very easy and quick to apply, strongly adhesive. - for both sides- for all model years

A robust carrier is essential for any good top case!To utilize our ZEGA top cases equipped with RapidTrap, it is crucial to use a perfectly matched carrier. We have found specific solutions for many motorcycle types.If, however, there is no ready-made solution available for your motorcycle, we have decided to offer the base carrier as a blank. This way, nothing stands in the way of your custom build!- 18 mm stainless steel tube with 2 mm wall thickness and 3 mm stainless steel inner plate- optimally suited for RapidTrap top cases- bent, laser-cut, welded, and electropolished- external dimensions 285 x 245 mm- tightly tolerated flatness!The ZEGA Evo / Pro top case can be attached to the carrier and is lockable. Available in natural aluminum and anodized versions in silver (And-S) or black (And-Black). For many vehicles, we already have vehicle-specific solutions!"Luggage Bridge ZegaPro Topcase".

Handlebar riser for the BMW R1200GS by 30 mm. With this handlebar riser, you can tilt your handlebar back and slightly increase the overall height of the handlebar.- made of CNC-machined aluminum - anodized surface- hole spacing 46 mm - 30 mm rise- includes screwsAttention: Raising without tilting unfortunately does not work, as it may otherwise come into contact with the windscreen.

Handlebar riser for BMW R1200GS by 30 mm. With this handlebar riser, you can tilt your handlebar back and slightly increase the overall height of the handlebar.Attention: Simply raising it does not work, as the windscreen is in the way.- made of CNC-machined aluminum - black, plastic-coated- hole spacing 38.9 - 30 mm rise- includes screws