optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Grips for original BMW heating system   - open - Color: black - Handlebar diameter: 24 mm - Length: 125 mm   Technical Data: Diameter :   24 / 26 mm Design :   open Color :   black (solid) Length :   125 mm Material :   Rubber Mountable safety wire :   No  

Handlebar Adapter R1200GS Year 2007Stylish handlebar closerincluding ABEA sporty motorcycle like the BMW R1200GS Year 2007 gains advantages with the tube handlebar adapter - this ensures significantly more relaxed riding.Handlebar adapter 40 mm higher and 40 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.No modification of the brake hose is necessary for this conversion.Installation is done without disassembly/bleeding of the brake hose. It only needs to be rerouted.Not suitable for the Adventure with additional lights, as the screws do not fit. All MV products have been mounted and tested on original motorcycles - without any aftermarket modifications.

BMW R1200GS LC + Adventure headlight protection for original BMW LED auxiliary lights, set, black item Description  Robust enough to protect against falling rocks - filigree enough to get the light output!  The protection of black anodized aluminum can easily fit to the original BMW LED Fog auxiliary lights mounted werden.Lieferumfang: 1x headlight protection right, 1x left headlight protector, 1x mounting hardware and installation instructions

JMP Heated Grips Length of grip rubber 120 mm - 12V operation- Heating power adjustable in five levels- Electronic switch for screw and adhesive mounting- For 22 mm handlebars- Open grip end with closure cap- Grip rubber mixture is resistant to environmental influences and heat- Includes grip adhesive Power Level 1: 41.85WPower Level 2: 43.74WPower Level 3: 44.96WPower Level 4: 45.5WPower Level 5: 45.9W

The heel guard in carbon for the BMW R 1200 GS is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Robust 1.5mm aluminum shell material Thick aluminum edge and bottom profiles provide additional stability Absolutely waterproof due to foamed special seal Top-loader, carrying handles in the lid area, lid with stainless steel hinges<br> Sturdy metal locks including keys and locking cylinder (keyed alike to existing cases possible. Please enter in the comment field during the ordering process) Includes screwed-on metal railing Includes lock adapter to attach the case to Hepco&Becker side case carriers Extensive accessories available 35-liter case not suitable for a helmet Fits most Hepco&Becker side case carriers (Please note the motorcycle-specific information for the respective carriers) Recommended load: 10kg per side case (Please note the motorcycle-specific information on the carrier as well as the motorcycle manufacturer's specific information)    

Robust 1.5mm aluminum shell material Thick aluminum edge and bottom profiles provide additional stability Absolutely waterproof due to foamed special seal Top-loader, carrying handles in the lid area, lid with stainless steel hinges<br> Sturdy metal locks including keys and locking cylinder (keyed alike to existing cases possible. Please enter in the comment field during the ordering process) Includes screwed-on metal railing Includes lock adapter to attach the case to Hepco&Becker side case carriers Extensive accessories available 35-liter case not suitable for a helmet Fits most Hepco&Becker side case carriers (Please note the motorcycle-specific information for the respective carriers) Recommended load: 10kg per side case (Please note the motorcycle-specific information on the carrier as well as the motorcycle manufacturer's specific information)    

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic components Absorbs shocks and ground contacts Rounded impact edges, recessed tie-down points in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be keyed alike (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load capacity: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and impact-resistant plastic components absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be delivered with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier at the back Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier Luggage systems generally do not require ABE and do not need to be registered

Made from 1.5mm thick aluminum sheet, black plastic-coated and high-impact plastic molded parts Absorbs shocks and ground contacts Rounded impact edges, recessed tie-down eyes in the lid Sturdy metal locks, integrated carrying handles Top loader - lid opens 90° Absolutely waterproof thanks to rubber seal in the lid Cases and top cases can be supplied with the same key (Please provide key number) Case with sturdy locking mechanism for attachment to the carrier; theft-proof Extensive accessories available Fits most Hepco&Becker side case carriers (Please note model-specific information for each carrier.) Recommended load: 10kg per case (Please observe model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Includes lock adapter, which is screwed onto the Hepco&Becker side case carrier at the back Luggage systems generally do not require ABE and do not need to be registered

Hepco & Becker aluminum drinking bottle with screw cap (0.7L)

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: Installation in place of the original bridge.

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model and thus integrates harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum in combination with a steel base carrier, the Alurack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) Luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: Installation instead of the original bridge.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every journey with a pillion. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. Vehicle-specific notes: also suitable for Xceed Topcase For each Topcase, the backrest is custom-made from black PU material to fit perfectly.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength and a very elegant look. Additional attachment points for luggage straps, for example, to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters for top case attachment are required high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, and motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: Installation in place of the original bridge.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, thus integrating harmoniously into the overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Easyrack has high strength as well as a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals. Vehicle-specific notes: Mounting / substructure in silver, Easyrack in black. Mounting instead of the original bridge.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, and motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Designed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals. Vehicle-specific notes: Installation in place of the original bridge.

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load capacity (please observe model-specific notes, the provided installation instructions, and motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Designed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.